What is the wading depth of the Jeep Compass?

1 Answers
LaLuke
07/25/25 12:29pm
The maximum wading depth of the Jeep Compass is 480mm. The wading depth of the Jeep Compass is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Jeep Compass is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe engine damage due to water intake. Judge the underwater road conditions based on the passage of vehicles ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed and choose an alternative route instead.
Was this review help?
4
2
Share
More Forum Discussions

How to Use One-Button Start in a Manual Transmission Car?

How to use one-button start in a manual transmission car: 1. Open the car door and enter the vehicle, adjust the seat and fasten the seatbelt; 2. Check if the gear is in neutral. If not, shift the gear back to neutral; 3. Press the clutch pedal all the way down and press the one-button start button. Manual transmission cars use a manual gearbox (MT), also known as a manual transmission, which requires manually shifting the gear lever to change the gear meshing device inside the transmission, thereby altering the gear ratio to achieve shifting. The principle is that the power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. The gear set consists of gears of different diameters, and different gear ratios result in completely different power transmission effects. The gear shifting during normal driving refers to changing the gear ratio.
2
2
Share

Where is the windshield washer fluid located in a car?

The windshield washer fluid is located in the engine compartment. If you need to refill the washer fluid, open the engine hood and locate the washer fluid reservoir. There is a cap on top of the reservoir, usually blue in color and marked with a windshield washer symbol. Open the cap to add the washer fluid. Windshield washer fluid is a cleaning solution for car windshields and is considered a consumable item in vehicle maintenance. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. There are three main types of windshield washer fluid: summer-use fluid, winter anti-freeze fluid, and special anti-freeze fluid.
8
0
Share

How long after applying explosion-proof film can the car windows be opened?

After applying explosion-proof film to a vehicle, windows can be opened after 3 days in summer and 7 days in winter. The film will adhere tightly to the glass, and opening the windows too soon may cause the edges to peel or curl, damaging the film. After application, it's also important to park the car in a sunny area to ensure proper evaporation of moisture under the film, enhancing its effectiveness. Vehicle explosion-proof film is characterized by its clarity; even darker tints should provide clear visibility without distortion or dimness, and maintain color durability. Its primary function is to prevent shattering; in the event of a collision, the film helps avoid glass fragmentation, ensuring passenger safety.
6
2
Share

How to Solve the Illuminated SVS Light in a Car?

Solutions for the illuminated SVS light in a car: 1. When the powertrain self-diagnosis detects an abnormality, it will use the SVS light to prompt the user to inspect the vehicle; 2. The SVS light warning may originate from the engine, transmission, or gear shift control mechanism. If the SVS indicator light stays on, it indicates that the engine control unit has detected incorrect signals from various sensors or that they have exceeded usage standards. In this case, it is necessary to promptly visit a repair shop for diagnostic tool testing and repairs, and prolonged driving is not advisable; 3. When the SVS indicator light is on, avoid high-speed driving, reduce the vehicle speed and drive slowly, and refrain from aggressive driving.
3
3
Share

What is the fuel tank capacity of the Bestune X40?

The fuel tank capacity of the Bestune X40 is 50L. The fuel tank is a container for storing fuel in a vehicle, specifically designed to hold hydraulic oil or fluid in a hydraulic system. In addition to storing oil, it also serves functions such as heat dissipation, separating air bubbles from the oil, and settling impurities. The tank is equipped with many auxiliary components, including coolers, heaters, air filters, and liquid level gauges. Fuel tanks can be categorized into open-type and closed-type. The Bestune X40 is a compact SUV with body dimensions of 4310mm in length, 1780mm in width, and 1680mm in height, featuring a wheelbase of 2600mm. It is powered by a 1.6L naturally aspirated engine.
1
1
Share

Is the Audi S7 four-wheel drive?

Audi S7 is four-wheel drive, and the four-wheel drive form is full-time four-wheel drive, which is Audi's quattro four-wheel drive system. The Audi S7 is a mid-to-large-sized car with body dimensions of 4979mm in length, 1908mm in width, 1413mm in height, and a wheelbase of 2928mm. In terms of power, the Audi S7 is equipped with a 2.9-liter twin-turbocharged engine, with a maximum power of 331kw and a maximum torque of 600nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with an 8-speed automatic transmission (AT). Both the front and rear suspensions of the Audi S7 are multi-link independent suspensions.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.