What is the wading depth of the Haval M6?
3 Answers
The wading depth of the Haval M6 is generally half the height of its tires. The Haval M6 is equipped with 17-inch rims. When the water depth is one-third of the tire height, it can be safely passed through without causing unnecessary damage as long as it is operated correctly. When the water depth exceeds half the tire height, caution is required as this may lead to water entering the vehicle. If the wading depth exceeds the bumper, extra vigilance is advised to prevent water from entering the engine. There are three scenarios for waterlogged vehicles: water covering the exhaust pipe but not reaching half the wheel height, water just reaching half the wheel height, and water exceeding half the wheel height. Generally, water just reaching half the wheel height can affect the vehicle. Below is a detailed explanation: 1. Water covering the exhaust pipe: If water only covers the exhaust pipe, simply driving the car away promptly is sufficient. Water covering the exhaust pipe will not be sucked back into the engine, and engine stalling is mainly due to water entering the engine's intake system, unrelated to the exhaust pipe being submerged. 2. Water just reaching half the wheel height: If water just reaches half the wheel height, the car typically will not leak. However, if submerged for an extended period with aging seals, leakage may occur. In such cases, drive the car to a 4S shop, remove the interior, clean, and dry it. 3. Water exceeding half the wheel height: If water exceeds half the wheel height, the engine may take in water, and the interior may also leak. Do not start the engine under any circumstances to avoid damage to the engine or electronic components. Note that if the car is waterlogged and starting it causes damage, insurance companies will not cover the costs.
I've been researching the performance of various SUVs lately, including the wading capability of the Haval M6. The official wading depth of the Haval M6 hasn't been clearly announced, but based on the information I've gathered, it's roughly in the range of 400 to 500 millimeters. This estimate is based on the design of similar SUVs. The wading depth mainly depends on the vehicle's ground clearance and the position of the air intake. The Haval M6 has a ground clearance of about 180mm, and its air intake is designed relatively high to help prevent water ingress. When I drove it through shallow water, it felt stable, but it's risky to attempt deep water, such as water levels exceeding half the wheel hub. When wading, drive slowly and maintain a steady speed to prevent water surges from impacting the engine. Regularly checking the chassis seals and tire conditions can extend the vehicle's lifespan. Before driving in the rain, check the route to avoid deep water sections—this is the safest approach. The Haval M6's performance in this aspect has impressed me.
As a frequent driver, I pay close attention to a vehicle's wading capability. The Haval M6 has a wading depth of approximately 450mm, which is comparable to similar compact SUVs, but in practical use, it's advisable to limit it to within 300mm to mitigate risks. Key safety points for wading include preventing water from entering the exhaust pipe or engine compartment, and driving at a low speed to reduce the chance of water backflow. The Haval M6 is well-sealed, but I always check if the air filter is dry after wading. During urban flooding, avoid attempting to cross if the water level exceeds your calf. Factors affecting wading depth include tire size and ground slope, with muddy terrain being more prone to water ingress. A tip from experience: close windows and maintain stable engine RPM while wading; the Haval M6's low-speed traction is a great help, and driving slowly after wading to drain brake moisture is more reliable.
