What is the wading depth of the Envision?

1 Answers
OIsabela
07/29/25 10:48am
The maximum wading depth of the Envision is approximately 300mm. The wading depth of the Envision is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, SUVs and off-road vehicles have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Envision is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
Was this review help?
20
4
Share
More Forum Discussions

Is there a 2020 model for the Polo?

At the Geneva Motor Show in June this year, the 2020 Polo-GTI was already unveiled. Relevant details are as follows: 1. As a globally popular compact car, the Polo only adopted the MQB platform, which was introduced as early as 2012, in its sixth generation. It is precisely because of the use of the MQB platform that the Polo's dimensions have increased, leading to the addition of 'Plus' to its name. Therefore, the new 2020 Polo will naturally continue to be built on the MQB platform. 2. In terms of appearance, the sixth-generation Polo adopts Volkswagen's latest design language. Following Volkswagen's consistent 'cookie-cutter' style, this design language will undoubtedly continue to be applied in future facelifts of the Polo, as can be seen from the 2020 Polo-GTI. This style may even be carried over to the seventh-generation Polo.
4
5
Share

How many liters of engine oil should be added to the Mercedes-Benz C260?

Mercedes-Benz C260 requires approximately 7 liters of engine oil. The functions of engine oil include: lubricating and reducing friction in the engine, assisting in cooling, sealing to prevent leaks, preventing rust and corrosion, and providing shock absorption. The dimensions of the Mercedes-Benz C260 are: length 4704mm, width 1810mm, height 1454mm, with a wheelbase of 2840mm and a fuel tank capacity of 66 liters. The Mercedes-Benz C260 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 135kW and a maximum torque of 280Nm, paired with a 9-speed automatic transmission. It features a multi-link independent suspension system for both front and rear.
4
0
Share

What are the causes of steering column failure in Haval M6?

The causes of steering column failure in Haval M6: Incorrect front wheel alignment, insufficient tire pressure leading to deformation and wear of the steering transmission mechanism, and excessive tightness of the ball joint pin, resulting in steering column failure. In such cases, it is advisable to promptly contact a dealer for repairs. The steering column is located on the car's steering wheel and serves as a device for the driver to control the direction. The steering system connects the steering wheel and the steering gear. The Haval M6 is a compact SUV under the Haval brand, positioned as a value-for-money family car. In terms of body dimensions, it measures 4649mm in length, 1830mm in width, and 1705mm in height, with a wheelbase of 2680mm.
7
4
Share

What is the tire model of the Volkswagen Lamando?

Volkswagen Lamando tire models: 1. The base model uses 205/60R16 tires; 2. The premium model is equipped with 225/50R17 tires. The Lamando is a compact sedan launched by SAIC Volkswagen, positioned between the Lavida and Passat in Volkswagen's lineup as the brand's first wide-body coupe, built on the MQB platform. Key features of the Volkswagen Lamando: 1. Powertrain: Equipped with EA888 TSI and EA211 TSI engines, paired with a 7-speed wet dual-clutch transmission; 2. Dimensions: Length × width × height measures 4599mm × 1826mm × 1425mm, with a wheelbase of 2656mm; 3. Exterior design: Features two chrome strips on the upper grille that integrate with the chrome-accented headlight brows, complemented by a lower grille and front bumper that extend horizontally towards both sides.
15
5
Share

How to reset the tire pressure warning light on a Magotan?

Methods to reset the tire pressure warning light on a Magotan: 1. Operate the buttons on the multifunction steering wheel, and use the "Tire Pressure" option in the multifunction menu to store the tire pressure status; 2. There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, indicating the reset is complete. The Magotan is derived from the Future B6, which is closely related to the Passat B6, and it is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. In terms of body dimensions, it measures 4866mm in length, 1832mm in width, and 1464mm in height.
8
1
Share

How to Avoid Stalling and Rolling Back on the Slope Start in Subject 2?

Methods to avoid stalling and rolling back on the slope start in Subject 2: 1. Do not release the clutch pedal abruptly when stepping on the accelerator. Lift the clutch pedal slowly, as releasing it too quickly can easily cause stalling; 2. Pull the handbrake tightly and release it slowly; 3. Press the foot brake all the way down to maintain sufficient braking force; 4. Use the clutch's semi-engaged state to overcome the downhill resistance; 5. Try to use a low gear for the slope start, as the engine's traction in low gear is greater than the downhill resistance. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. The test items for cars C1 and C2 include reversing into a garage, parallel parking, slope fixed-point parking and starting, right-angle turns, and curve driving—five items in total.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.