What is the wading depth of the Dodge Journey?

1 Answers
LePeter
07/29/25 3:21am
The maximum wading depth of the Dodge Journey is 500mm. The wading depth of the Dodge Journey is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Dodge Journey is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the automatic start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Judge the underwater road conditions based on the passage of vehicles ahead and choose a suitable entry point. Observe the path taken by other vehicles, follow their tracks, and drive at a low speed. Avoid sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water recklessly. Instead, choose an alternative route.
Was this review help?
18
3
Share
More Forum Discussions

What are the disadvantages of wheel alignment eccentric bolts?

Wheel alignment eccentric bolts do not cause any harm to the vehicle. Here is more relevant information: 1. Function of wheel alignment eccentric bolts: The wheels of a car have alignment data, and they are not simply perpendicular to the ground. The front wheels have camber and toe angles, and the rear wheels also have camber angles. The wheel alignment data of a car needs to be adjusted regularly because driving on bumpy roads or over speed bumps can cause these data to change. 2. Hazards of incorrect wheel alignment data: If the wheel alignment data is incorrect, it can affect the vehicle's driving stability and handling. Therefore, if issues arise, car owners should promptly perform a wheel alignment. When getting a wheel alignment, car owners can also adjust the alignment data based on their driving habits and road conditions. During daily use, it is important to slow down when driving over speed bumps or bumpy roads.
9
1
Share

What does the passive pedestrian protection of the Regal mean?

The passive pedestrian protection of the Regal generally refers to the use of hood pop-up technology, which causes the engine to bulge instantly during a collision, ensuring that the human body impacts a soft and smooth surface rather than the hard car body. The passive pedestrian protection system includes: Passive pedestrian protection is a type of pedestrian protection system, which consists of safety systems, hazard warning systems, and collision avoidance systems, involving sensor technology, communication technology, information display technology, and driving status monitoring technology. The function of the passive pedestrian protection system: These onboard devices include sensors, LiDAR, infrared, ultrasonic sensors, blind spot detectors, etc., installed at various parts of the vehicle body. They have accident monitoring capabilities and can provide the driver with necessary information about the vehicle's surroundings and the vehicle itself through sound, images, etc. They can also automatically or semi-automatically control the vehicle to effectively prevent accidents.
17
0
Share

Should You Brake When Driving Over Speed Bumps?

You should brake when driving over speed bumps. Speed bumps, also known as speed humps, are traffic safety installations on roads designed to reduce the speed of motor vehicles and non-motor vehicles. The correct way to drive over speed bumps is to slow down before reaching them and then pass over them slowly with both wheels perpendicular to the bump. This allows both wheels to contract simultaneously, with the force from the ground being evenly distributed between the springs and shock absorbers of both wheels, minimizing damage to the vehicle. Precautions when driving over speed bumps include: 1. Avoid having only one tire go over the bump, as this can easily cause misalignment on one side of the chassis suspension; 2. Avoid driving diagonally over the bump, as this can lead to uneven force distribution when the vehicle body contacts the ground, potentially damaging the springs and tires.
3
2
Share

What transmission does the Volkswagen CC use?

Volkswagen CC transmission type is a 6-speed dual-clutch transmission. Overview of automotive transmissions: A transmission is a device that changes the speed ratio and direction of motion, typically located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. Classification of transmissions: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT, with AT achieving automatic shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size, while DCT features two clutches.
13
5
Share

Can an AGM battery be replaced with an EFB battery?

An AGM battery can be replaced with an EFB battery. Here is more relevant information: 1. Reasons: (1) EFB batteries are excellent batteries, and they are more heat-resistant than AGM batteries. (2) Theoretically, EFB batteries have a shorter lifespan than AGM batteries, but AGM batteries are not heat-resistant. Prolonged exposure to high temperatures can reduce the lifespan of AGM batteries. (3) Most car batteries are installed in the engine compartment, where temperatures are relatively high. Therefore, replacing an AGM battery in the engine compartment with an EFB battery is a feasible solution. 2. Differences between them: (1) Different materials: AGM batteries use fiberglass mat, while EFB batteries use lead-acid. (2) Different vehicle applications: AGM batteries are typically used in European and American cars, while EFB batteries are used in Japanese cars.
8
0
Share

Is it necessary to repair peeling paint on rims?

Peeling paint on rims should be repaired. The repair methods and impacts of peeling paint on rims are as follows: Repair methods for peeling paint on rims: Peeling paint on rims can be addressed with spray painting, which can be done at a spray paint shop and is relatively inexpensive. For those with higher requirements for their vehicles, rim repair can be performed at a nearby car beauty shop or repair shop. Impact of peeling paint on rims: Rim scratches are generally categorized into surface scratches and rim edge scratches. After scratching and peeling paint, the rim loses its protective layer. Prolonged exposure in this condition can lead to oxidation and corrosion of the rim surface. If the damage reaches the aluminum alloy core of the rim, the rim will be rendered unusable. In particular, corrosion caused by unrepaired edge scratches can result in poor sealing between the rim and tire, leading to air leakage and compromising safety.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.