What is the wading depth of the Chery Ant?

1 Answers
VeraLee
07/30/25 12:40am
The wading depth of the Chery Ant is 135mm. When the water depth is one-third of the tire height, it can pass safely; when the water depth exceeds half of the tire height, caution is required as this may lead to water entering the vehicle; if the wading depth exceeds the bumper, drivers should be extra vigilant to avoid water entering the engine; if the engine does get flooded, never attempt to restart it, as this can cause significant damage to the vehicle. Additional information: In terms of configuration, the vehicle has undergone comprehensive upgrades in exterior, interior, comfort features, and health and environmental protection. It offers a variety of two-tone body colors for personalized selection; a new interactive interface for enhanced fun and convenience; Easy-Entry electric seats with one-touch quick movement, folding, and reset for effortless elegance; and standard PM2.5 air conditioning filters + remote disinfection for fresh air and free breathing. Body dimensions: length, width, and height are 3200mm, 1670mm, and 1550mm respectively, with a wheelbase of 2150mm. It is equipped with a pure electric 41-horsepower motor, with a maximum power of 30kw, paired with a single-speed electric vehicle transmission.
Was this review help?
8
5
Share
More Forum Discussions

What does 235/55r18 mean?

235 represents the tire's cross-sectional width of 235mm; 55 represents the tire's aspect ratio, with a higher value indicating a thicker tire; r stands for radial tire type, and 18 indicates the rim diameter of 18 inches. Below is relevant information about tires: Wear: Tires have wear indicators. There are triangular marks on the side of the tire, and when the tread wears down to the point indicated by the triangle, it is recommended to replace the tire. Inside the tire's tread grooves, there are also raised markers. When the tread wears down to the level of these raised markers, the tire should be replaced. Simple punctures can be repaired without needing replacement, but bulges must be replaced. Aging: Rubber oxidizes in the air, and oxidized rubber hardens, reducing grip. Therefore, even if a set of tires is not used, their lifespan will decrease. It is not recommended to use tires for more than 5 years from the production date. The production date is marked on the side of the tire.
10
0
Share

What documents are needed to pick up a new car?

Documents such as the vehicle ownership certificate and the vehicle license. There are three key points to note when inspecting a new car: 1. Check the paint surface: The uniformity and smoothness of the seams are the focus of inspection. It's best to compare with two cars of the same model. The gaps between the doors, bumper, and engine hood should be consistent. If the gaps are too large or the width differs from other cars, choose carefully; 2. Check the tires: The new car's tires should have no damage on the sidewalls, and the front tires should have no puncture marks on the tread. It's best if the tire hairs on both front and rear tires are intact, at least the rear tire hairs should be visible. If there are no traces of tire hairs on both front and rear tires, but the odometer shows only a few kilometers, it's abnormal; 3. Check the nameplate: Each car's nameplate corresponds to the unique engine number and chassis number of the vehicle. Verify the numbers with the certificate of conformity to ensure the codes match. Check the manufacturing date on the nameplate; the gap between the pickup time and the manufacturing time should not exceed three months.
4
4
Share

Which country does the Moro brand belong to?

Moro is a domestic independent motorcycle brand under Taizhou Senlong Motorcycle Manufacturing Co., Ltd. Here are some relevant details:1. Main production: The company primarily manufactures motorcycles, electric vehicles, scooters, and motorcycle accessories. Additionally, Senlong has years of motorcycle manufacturing experience, and Moro is a personalized motorcycle brand established after the company's transformation and upgrading.2. Configuration: The Moro 500MG motorcycle is equipped with a Loncin KE500 engine. Developed and produced entirely in China, it is a large-displacement cruiser model that combines comfort and safety, tailored to the physiological curves and riding habits of Asian riders.
4
5
Share

How Many Years Until a Family Car Requires Biannual Inspections?

Private cars require biannual inspections after 15 years. Below is relevant information: 1. Regulations: According to the relevant provisions of the Road Traffic Safety Law Implementation Regulations: Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; and after 15 years, once every 6 months. 2. Inspection content: Vehicles must pass regular tests including exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and must have no traffic violation records to receive an inspection pass mark. All inspection dates are based on the registration date listed on the vehicle license. From the date of registration, vehicles must undergo safety technical inspections according to the specified schedule, commonly referred to as annual inspections or annual reviews.
11
5
Share

How much torque should be applied to cylinder head bolts?

Tire bolt torque is generally around 100-120 Nm. Below is more information about tire bolt torque: 1. Different vehicle models require different torque: The specific value should be checked in the manual for the indicated Nm, but some current vehicles use bolts instead of traditional nuts, and the torque should be smaller. 2. Hazards of tire bolt issues: The primary problem is the potential for the wheel to be thrown off due to a sudden bolt breakage. 3. Cracking: Tire bolts should not be over-tightened, as excessive torque can cause stretching of the bolt threads and even lead to cracking. Additionally, there is a specific tightening sequence principle for tire bolts.
18
1
Share

When Will Highways Be Toll-Free?

Highway toll-free policies are generally implemented during important national holidays or under special circumstances. Below is relevant information about the toll-free policy: 1. Eligible Vehicles: The holiday toll-free policy refers to the exemption of toll fees for small passenger vehicles during major holidays. 2. Specific Notifications: Toll-free holidays include the Spring Festival, Qingming Festival, Labor Day, and National Day. The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day. If you enter the highway during a non-free period but exit during the free period, you are eligible for toll-free passage. Conversely, if you enter during the free period but exit during a non-free period, you are not eligible for toll-free passage.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.