What is the wading depth of NIO vehicles?

1 Answers
OKayden
07/30/25 5:13am
NIO's maximum wading depth is 45cm. Vehicle wading refers to driving through low-lying areas or waterlogged roads, essentially passing through water. This typically occurs during rainy weather when inadequate drainage leads to water accumulation in low-lying road sections. Below are reasons for engine stalling during water wading: 1. Moisture or water ingress causing short circuits in the high-voltage ignition system: This is relatively common. The water may appear shallow, and while the vehicle can pass through, it may stall, usually due to water splashing. 2. Water entering the exhaust pipe: Since the car's exhaust pipe is positioned low, water levels surpassing it can cause stalling due to inability to exhaust. 3. Water entering the air intake: This happens when water reaches the air filter, leading to stalling. This scenario is less common and usually occurs at higher water levels.
Was this review help?
15
1
Share
More Forum Discussions

Can cleaning restore a faulty EGR valve?

Cleaning the EGR valve can resolve the issue. During cleaning, it is necessary to use carburetor cleaner to clean the intake passage, carbon deposits inside the EGR valve, and the engine's throttle body. When cleaning the intake passage and the EGR valve connecting pipe, the method of burning the pipeline can be employed. Here is some extended information: 1. Types of EGR valves: There are two main types: mechanical and electronically controlled, both serving the same primary function. During engine combustion, they redirect the produced exhaust gases into the intake manifold to lower the combustion chamber temperature, enhance engine power output, improve exhaust emissions, and extend the lifespan of engine components. 2. Location of the EGR valve: It is positioned on the right side of the engine intake manifold, near the throttle body. The EGR valve is an electromechanical component that plays a crucial role in managing engine exhaust gases. If this part malfunctions, it can significantly impact engine power output and affect the vehicle's emission standards.
6
2
Share

Are Plug-in Hybrid Electric Vehicles Considered New Energy Vehicles?

Plug-in hybrid vehicles are classified as new energy vehicles. Below is an introduction to relevant information: 1. Definition: Plug-in hybrid electric vehicles (PHEVs) are a new type of hybrid electric vehicle. 2. Features: Their most notable characteristic is the ability to be externally charged as well as refueled with gasoline. 3. Regulations: According to the "Automobile Industry Investment Management Regulations (Draft for Comments)," after 2020, plug-in hybrid vehicles will no longer enjoy new energy policy support and will be reclassified as traditional fuel vehicles. Below is extended information about new energy vehicles: 1. Meaning: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving systems, resulting in advanced technical principles and featuring new technologies and structures. 2. Includes: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, and hydrogen engine vehicles.
1
1
Share

What is the fuel consumption of the Bestune T55?

The Bestune T55 has a fuel consumption of 6.6 liters per 100 kilometers. Below are the detailed specifications of the Bestune T55: 1. Vehicle Positioning: The Bestune T55 is a compact SUV under FAW Bestune, with dimensions of 4437/1850/1625mm (length/width/height) and a wheelbase of 2650mm. 2. Powertrain: It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 258N·m, paired with a 7-speed wet dual-clutch transmission. The engine incorporates nine cutting-edge core technologies, including Miller cycle technology, a 350bar fuel injection system, and variable valve technology, achieving a high compression ratio of 11.5 and an ultra-high thermal efficiency of 39.06%. It only requires 92-octane gasoline. 3. Intelligent Driving Assistance: The vehicle features L2+ level autonomous driving technology, including lane departure warning system, ACC adaptive cruise control, and automatic emergency braking among other intelligent safety assistance functions.
4
4
Share

What is the urban fuel consumption of the Skoda Rapid?

The comprehensive urban fuel consumption of the Skoda Rapid 1.5L manual transmission is 5.6L/100km. Below is an introduction to the Skoda Rapid: 1. Overview: The Skoda Rapid is an A-class sedan developed by SAIC Volkswagen based on the PQ25 platform, marking Volkswagen's first attempt to develop an A-class car on an A0 platform. Developed simultaneously with the Rapid are the new Jetta and new Santana, which have already been unveiled. 2. Launch: On April 22, 2020, SAIC Skoda announced its full range of products through an online media conference. Additionally, Skoda introduced zero-interest consumer credit financial policies covering all models and more substantial used car trade-in support programs. 3. Exterior: The new car largely maintains the design of the current model, featuring a family-style vertical grille, with chrome trim accents integrated into the lower grille and window sills. It offers 14-inch steel wheels and 16-inch alloy wheels as options. In terms of details, high-end models are equipped with LED daytime running lights.
16
1
Share

How Many Cans of Refrigerant Are Needed for Car Air Conditioning?

Car air conditioning generally requires 4 cans of refrigerant, but the actual amount is controlled based on the pressure gauge readings during operation. Below are the methods and timing for adding refrigerant to the air conditioning system. Method for Adding Refrigerant to Car Air Conditioning: Prepare qualified refrigerant charging tools, connect the car air conditioning system to the adapter of the charging tool, evacuate the system, and inject liquid refrigerant from the high-pressure side to complete the process. During charging, continuously monitor the high and low pressures. Typically, the low pressure should be 150-250 Kpa, and the high pressure should be 1300-1500 Kpa. Refer to the manual for specific values. Timing for Adding Refrigerant to Car Air Conditioning: Generally, refrigerant should be added every 2-3 years. However, if the cooling effect decreases or bubbles continuously appear in the sight glass of the air conditioning lines, it is necessary to replenish the refrigerant.
10
2
Share

What are the length, width, and height dimensions of the Bestune B70?

The Bestune B70 measures 4800mm in length, 1820mm in width, and 1472mm in height. Below are the detailed specifications of the Bestune B70: 1. Safety Features: The vehicle adopts a 3H structural body design, complemented by Bosch's latest ESP9 system, 8-channel parking radar, reverse camera, tire pressure monitoring system, and numerous other active and passive safety technologies that showcase technological prowess. It is also equipped with intelligent features such as automatic lighting control system and cruise control. 2. Powertrain: The standard version of the Bestune B70 is powered by a 2.0L naturally aspirated engine, delivering 108kW (147PS) and 184Nm of torque, paired with either a 6MT or 6AT transmission. The B70 Sport version is equipped with a 1.8T turbocharged engine, producing 137kW (186PS) and 235Nm of torque, mated to a 6AT transmission.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.