···
Log in / Register

What is the W6 car?

3 Answers
VonPaige
07/29/25 9:04pm
W6 is a pure electric vehicle from WM Motor. Below is a brief introduction about WM Motor: 1. Technology: It is equipped with the AVP unmanned autonomous parking system jointly developed by WM Motor and Baidu Apollo, enabling autonomous driving in specific scenarios. 2. Exterior: The WM W6 continues the design language of the EVOLVE concept car. The front features a closed grille, complemented by vertical daytime running lights below the headlights, giving it an overall refined look. Additionally, the window area between the C and D pillars on the side of the WM W6 is more squared compared to other WM models, paired with the currently popular hidden door handles and a full-width taillight, enhancing the vehicle's recognizability. 3. Power: The WM W6 adopts a combination of a permanent magnet synchronous motor and a ternary lithium battery, delivering a maximum power of 160kW and a maximum torque of 225Nm. It offers two NEDC range options: 520km and 620km. Notably, the 620km range significantly surpasses that of the EX5-Z and EX6-Plus.
Was this review help?
8
0
Share
GemmaAnn
08/15/25 7:09pm
The W6 is a pure electric mid-size SUV launched by WM Motor, and I've driven it a few times, finding the driving experience quite modern. It is equipped with a high-performance electric motor, delivering a maximum power of 165kW, with a 0-100km/h acceleration time of less than 8 seconds, offering direct and responsive power delivery. The battery uses ternary lithium material, with the standard version offering a range of 520km and the long-range version reaching up to 620km. It supports fast charging, capable of replenishing 70% of the battery in just half an hour. The built-in Baidu Apollo autonomous driving system achieves L4-level assistance, making automatic parking spot finding in parking lots very practical. The interior features a full LCD dashboard and a 12.8-inch large screen, with smooth and user-friendly operation. Priced between 180,000 to 260,000 yuan, it is relatively affordable, suitable for families or commuters. I think it offers good value for money, but it's worth noting that the battery warranty is only for 8 years or 150,000 kilometers, and regular maintenance can extend its lifespan. Overall, it's a great choice for an entry-level electric vehicle, quieter and more fuel-efficient than gasoline cars, with convenient and intelligent parking features.
Was this review help?
10
2
Share
Expand All
SanLola
10/16/25 8:20am
I've ridden in my friend's W6 several times for commuting, and the comfort level is quite satisfying. As a WM Motor vehicle, it focuses on urban practicality with well-supported seats that don't cause fatigue on long drives. The electric motor provides smooth acceleration without any jerking, which both elderly family members and children appreciate. The spacious design includes a roomy trunk for luggage and various storage compartments. A single charge covers over 500 kilometers, sufficient for daily use and weekend getaways. The smart system, featuring voice-controlled air conditioning and navigation, is user-friendly even for beginners. Safety features like collision warning and lane-keeping assist make highway driving more secure. Priced around 200,000 RMB, it saves significantly on charging costs compared to gasoline cars. I find it ideal for commuters, though its resale value isn't high—check battery health before buying used. Overall, it's a comfortable and reliable companion.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.