What is the vv5 car?

What is the reason for the normal temperature gauge but the red light is on?

The normal temperature gauge but the red light is on is caused by a false alarm of the temperature warning light. When the owner adds antifreeze, due to the excessively low position of the vent hole on the side of the reservoir damping tube, a compressed air column forms in the damping tube, causing the liquid level in the damping tube to be much lower than that in the expansion tank and near the sensor alarm point. The vibration during driving can easily trigger a false alarm. Here is some information about the temperature gauge: Normal temperature: The temperature gauge shows the coolant temperature, typically displaying 70-90 degrees after the engine warms up, which is normal. When the water level in the coolant tank is low, the temperature will rise, and water needs to be added. If the temperature gauge approaches the H or the red danger zone, and the temperature warning light comes on in severe cases, it indicates that the engine coolant temperature is too high. Working principle: The sensor of the temperature gauge is a thermistor-type sensor, fixed with threads on the engine coolant passage. The thermistor determines the current flowing through the coil winding of the temperature gauge, thereby driving the pointer to swing.

19

3

Share

What Should a Vehicle Technical File Include?

Vehicle technical file refers to the historical records that document the basic information, main performance, operational usage, major component replacements, inspection and maintenance records, as well as accident handling and other related vehicle data throughout the entire lifecycle of a vehicle, from its purchase as a new car to its scrapping. The detailed contents recorded in the vehicle technical file are as follows: Basic information and main performance of the vehicle: Records the specifications, equipment, technical performance, modifications, and changes of major assemblies. Operational usage: Records the mileage, transportation turnover, fuel consumption, tire usage, and mechanical failures of the vehicle. Inspection and maintenance records: Documents the content, results, and timing of inspections, as well as the location and cause of identified faults or potential issues, solutions, historical maintenance records, and the technical condition of major assemblies. Accident handling: Mainly records the occurrence, causes, and resolution outcomes of mechanical failures or accidents involving the vehicle. The role of the vehicle technical file is to understand the vehicle's performance, technical condition, and changes, grasp the patterns of vehicle usage and maintenance, and provide a basis for vehicle maintenance, modification, and spare parts inventory. It also serves as a reference for evaluating the level of technical management and provides feedback to vehicle manufacturers to improve manufacturing quality. Therefore, it is an important foundational task in vehicle technical management. Specifically: It helps in mastering the changing patterns of vehicle performance and gaining the initiative in vehicle management, usage, upkeep, and repair. It provides reliable technical data and scientific basis for the planning of vehicle maintenance, repairs, and material procurement. It offers research and improvement materials for technical evaluations of vehicles, enhancements in vehicle structure and performance, and spare parts production. It provides analytical data for selecting vehicle models when expanding a company's fleet. It serves as a basis for evaluating the technical management practices at the grassroots level.

12

4

Share

Is It Normal to Drive 400 Kilometers on a Full Tank of Gas?

It is a normal situation because fuel tank sizes and fuel consumption rates vary, leading to different driving ranges. Below is relevant information about fuel consumption: 1. Fuel consumption per 100 kilometers: This refers to the amount of fuel a vehicle consumes when driving 100 kilometers at a certain speed on the road. It is a theoretical indicator for the vehicle. Manufacturers measure this value by installing a dynamometer on the vehicle chassis in controlled environments, converting the results into speed parameters, and then calculating the theoretical experimental fuel consumption data per 100 kilometers at specified speeds. 2. Road condition fuel consumption: Also known as multi-condition road cycle fuel consumption, this is a fuel indicator calculated based on repeated tests where the vehicle is driven at specified speeds and times on designated roads. The standard specifies that each cycle includes various driving conditions, recording parameters such as gear shift timing, parking duration, driving speed, acceleration, braking, and deceleration. This method yields values that are closer to real-world conditions.

5

Share

What Causes a Motorcycle to Fail to Start After Falling Over?

Motorcycle failing to start after falling over could be due to gasoline flooding the cylinder and wetting the spark plug, gasoline entering the air filter causing blockage, or even engine oil entering the air filter or carburetor through the breather tube, leading to failure to start. Below is an introduction to motorcycle spark plugs: 1. Introduction: The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high voltage into the combustion chamber and generates a spark across the electrode gap to ignite the combustible mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell, with the side electrode welded to the shell. 2. Working Principle: Under high voltage, the air between the spark plug's center electrode and side electrode rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties.

17

4

Share

Does Comprehensive Car Insurance Cover Water Damage?

Comprehensive car insurance does not include water damage coverage. Water damage insurance is a newly derived type of auto insurance, which mainly refers to an additional coverage purchased by the car owner for the engine. Comprehensive car insurance includes compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, no-deductible coverage, and passenger liability insurance. However, it does not include water damage coverage. Water damage insurance is not a standalone policy and cannot be purchased independently; it is an add-on to basic insurance. Water damage coverage is purchased as an add-on to vehicle damage insurance, meaning the car owner must first purchase the main vehicle damage insurance before adding water damage coverage. Since water damage insurance provides additional protection to the car owner, damage to the engine caused by water submersion will also be covered. However, if the car owner forcibly starts the engine after the vehicle has been submerged, resulting in damage, the insurance company will not compensate for the loss. Important Notes: After purchasing water damage insurance, if the vehicle is submerged, the car owner is advised to proactively turn off the engine in the water to avoid damage to engine components such as valves due to water intake while driving. While ensuring personal safety, immediately call the insurance company to report the incident and have them assess the damage on-site or arrange for a tow truck to transport the vehicle to the insurance company's assessment point. If the damage falls within the coverage limits of the water damage insurance, the car owner will receive corresponding compensation.

9

1

Share

What is the general proportion of auto parts to the whole vehicle?

Auto parts generally account for 40%-60% of the whole vehicle. Here is the relevant introduction of auto parts: 1. Engine parts: throttle body, engine, engine assembly, oil pump, nozzle, tensioner, cylinder block, bearing bush, water pump, fuel injection, gasket, camshaft, valve, crankshaft, connecting rod assembly, piston, belt, muffler, carburetor, fuel tank, radiator, fan, oil seal, cooler, filter, etc. 2. Transmission system parts: transmission, gear shift lever assembly, reducer, clutch, pneumatic and electric tools, magnetic materials, electronic components, clutch disc, clutch cover, universal joint, universal ball, universal roller, ball cage, clutch plate, transfer case, power take-off, synchronizer, synchronizer ring, timing belt, differential, differential housing, differential bevel gear, planetary gear, wheel carrier, flange, gearbox, intermediate shaft, gear, shift fork, drive shaft assembly, drive shaft flange, belt. 3. Brake system parts: brake shoe, brake pad, brake disc, brake drum, compressor, brake assembly, brake pedal assembly, brake master cylinder, brake wheel cylinder, ABS-ECU controller, electric hydraulic pump, brake camshaft, brake roller, brake pin, brake adjustment arm, brake chamber, vacuum booster, hand brake assembly, parking brake assembly, parking brake lever assembly. 4. Steering system parts: steering gear, steering knuckle ball joint, steering wheel, steering gear, booster assembly, steering rod, booster pump.

8

0

Share

What is the vv5 car?

What is the reason for the normal temperature gauge but the red light is on?

What Should a Vehicle Technical File Include?

Is It Normal to Drive 400 Kilometers on a Full Tank of Gas?

What Causes a Motorcycle to Fail to Start After Falling Over?

Does Comprehensive Car Insurance Cover Water Damage?

What is the general proportion of auto parts to the whole vehicle?

What is the SPN3226 fault?

What is the small light below the car headlight called?

What does 'one gear per clutch' mean?

What does the CAN communication fault in Auman truck engine mean?