···
Log in / Register

What is the Voluntary Scrapping Process for Private Cars?

1 Answers
VonMackenzie
07/24/25 11:11pm

Private Car Scrapping Regulations: For 5-seat family cars and 7-seat SUVs, as well as non-commercial small and mini vehicles, there is no usage lifespan limit. However, the state will recommend scrapping when the normal mileage reaches 600,000 kilometers. In addition to the above-mentioned vehicles, small and mini non-commercial passenger cars, large non-commercial sedans, and wheeled special machinery vehicles also have no usage lifespan restrictions. Private Car Voluntary Scrapping Process: 1. The car owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix their seal. 2. Apply at the registration and acceptance counter. For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age, after inspection and confirmation by the vehicle inspection counter that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. 3. The owner can choose a qualified recycling company to dismantle the vehicle by presenting the "Notice". 4. The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed according to regulations after approval.

Was this review help?
18
1
Share
More Forum Discussions

What are the techniques for depressing the clutch?

The methods for depressing the clutch are as follows: 1. Depress the clutch quickly to ensure complete separation and avoid clutch slippage; 2. Release the clutch slowly to ensure smooth vehicle operation; 3. Do not depress the clutch arbitrarily. Precautions for clutch usage are: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or separately, but the axial direction must be fixed; 3. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation; 4. The power supply and control circuits should be noted, with the clutch power supply being 24V DC; 5. When installing a jaw-type electromagnetic clutch, ensure there is a certain gap between the end face teeth to prevent grinding during idle operation.
7
2
Share

What is the normal tire pressure in kPa?

Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully loaded (5 people), it is more appropriate to adjust the tire pressure to around 2.5. In general, there are two situations where a tire pressure value of 2.3 is also normal. Content Extension: 1. The standard tire pressure value is inherently a conservative figure, allowing for minor fluctuations. Therefore, whether in winter or summer, tires should be inflated according to the standard tire pressure. As long as the standard tire pressure is maintained, there is no need to worry about the impact of external temperature on tire pressure, and there is no necessity to adjust the inflation pressure standard based on temperature variations. 2. Tires require the correct pressure value to function effectively; neither too low nor too high tire pressure is good. 3. Low tire pressure can lead to: tire overload and overheating, which may even cause tire explosions, premature or irregular wear, poor handling, and reduced fuel economy. 4. High tire pressure can result in: abnormal wear, poor handling, reduced ride comfort, and unnecessary damage due to road hazards.
8
3
Share

What is the vehicle and vessel tax for a 2.4L displacement car?

For passenger vehicles with a 2.4L displacement and seating capacity of 9 or fewer, the annual vehicle and vessel tax ranges from 720 to 900. The vehicle and vessel tax not only varies based on the car's displacement but also differs across regions, meaning the same displacement vehicles may have different tax standards in different areas. Extended Content: 1. For motor vehicles (excluding trucks) and non-motor vehicles, the tax payable = number of taxable vehicles × unit tax amount. 2. For trucks, motorized boats, and non-motorized boats, the tax payable = tonnage or net tonnage of the vehicle or boat × unit tax amount.
19
3
Share

What Causes an Automatic Transmission Car to Not Move When Shifted to D Gear?

Here are the specific reasons why an automatic transmission car does not move after shifting to D gear: 1. Check if the transmission fluid level is too low, whether the main oil pressure and gear oil pressure are normal, and then verify if the gear switch signal is normal, if the wiring from the transmission computer to the shift solenoid valve is intact, and if the gear solenoid valve is functioning properly. 2. If none of the above issues are found, it indicates a problem with the internal control system of the transmission, requiring disassembly of the transmission to inspect the internal components. Below is additional information about automatic transmission gears: (1) The R gear is the reverse gear. When engaged, it connects the hydraulic system to the reverse gear circuit, causing the drive wheels to turn in reverse for backing up. Do not forcibly shift to "R" gear when the vehicle is not completely stopped, as this can damage the transmission. (2) The N gear is the neutral gear. When in neutral, the planetary gear system idles without transmitting power. (3) The D gear is the drive gear. When the shift lever is in this position, the hydraulic control system automatically engages the appropriate forward gear circuit based on throttle opening and vehicle speed signals, shifting gears automatically as speed changes to achieve automatic transmission functionality. (4) The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving.
12
2
Share

What to do if three windows of BYD S6 malfunction?

If three windows of BYD S6 malfunction, lift the window button directly to raise the window to the top, hold for 3-5 seconds and then release. Then press the window button to lower the window to the bottom, hold for 3-5 seconds and release. Here is more information about BYD: 1. BYD is a Chinese automobile brand founded in 1995, mainly producing commercial cars, family cars, and batteries. 2. Representative models of BYD include traditional high-quality fuel vehicles such as F3, F3R, F6, F0, G3, G3R, L3/G6, and Surui, the S8 sports hardtop convertible, the high-end SUV model S6 and MPV model M6, as well as the globally leading F3DM, F6DM dual-mode electric vehicles and the pure electric vehicle E6.
6
4
Share

What does it mean to schedule two sessions for Subject One?

Subject One scheduling two sessions is mainly to increase the chance of successful registration. Here is the relevant introduction about Subject One: 1. Exam Introduction: The driver's license exam Subject One tests theoretical knowledge, conducted at the DMV, and is a mandatory licensing exam for applicants. The exam content includes the most basic knowledge such as driving theory foundation, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. The schedule for the driver theory exam is arranged by local DMVs. 2. Exam Process: The total time for the Subject One exam is 45 minutes, with the exam paper consisting of 100 questions, including true/false and single-choice questions, with a full score of 100 and a passing score of 90. The exam paper is randomly selected and combined by the computer driver exam system according to the proportion specified in the "Motor Vehicle Driver's License Business Work Standards."
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.