What is the Volkswagen Tharu?

2 Answers
Heather
08/31/25 4:06am
Volkswagen Tharu is actually the Tharu, a compact SUV under the Volkswagen brand. Below is an introduction to the Volkswagen Tharu: 1. Power: Equipped with a 1.4T turbocharged engine, the maximum power is 110kW, and the maximum power speed is 5000 rpm, matched with a 7-speed dual-clutch transmission. 2. Model: The Volkswagen Tharu is a compact 5-door, 5-seat SUV. The body dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. 3. Suspension: The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
1
4
Share
FinleyAnn
09/12/25 7:28am
I've driven the Volkswagen Tharu for a while and found it to be a very practical SUV, especially suitable for someone like me who commutes in the city. The body is compact but not stingy, with spacious interior space. The rear seats can easily accommodate several large bags, and the trunk has no problem holding luggage for weekend trips. It's powered by a 1.5T engine, providing smooth starts and acceleration—not as powerful as larger engines, but it offers good fuel efficiency for daily use, averaging around 7L/100km. The interior design is simple and functional, equipped with a touchscreen for convenient control of air conditioning and navigation. As for drawbacks, the noise insulation is average, with noticeable wind noise at high speeds, and maintenance costs are slightly higher than some smaller brands. Overall, I think it offers great value for money, especially in the price range around 200,000 yuan, competing with models like the Honda CR-V, but with the added trust of the Volkswagen brand. If you're looking for a family car, the Tharu is worth a try.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Properly Shut Down a Keyless Automatic Transmission Vehicle?

The correct method to shut down a keyless automatic transmission vehicle is: 1. Press the brake pedal to bring the vehicle to a smooth stop; 2. Shift the gear from D (Drive) to N (Neutral); 3. Engage the handbrake (for electronic handbrake, simply pull it upwards); 4. Release the foot brake, but do not turn off the power (this is to ensure the vehicle is completely stationary under the handbrake's effect, preventing P (Park) lock); 5. Continue pressing the foot brake and shift the gear from N (Neutral) to P (Park); 6. Release the foot brake, press the one-touch start button to turn off the power. The gears in an automatic transmission are: 1. P for Park: When the gear lever is in this position, the drive wheels are mechanically locked, and the engine can be started; 2. R for Reverse: Simply press the unlock button on the gear lever without needing to press the brake pedal.
5
4
Share

Where should the jack be placed to lift a car?

A jack should be placed on the raised position of the chassis near the tire. A jack is a lightweight lifting device that uses a rigid lifting component as its working mechanism to lift heavy objects within a small stroke range through a top support seat or bottom support claw. Jacks are primarily used in factories, mines, transportation sectors, and other industries for vehicle repairs, lifting, and support tasks. Steps for using a jack: 1. Before using the jack, ensure the car is parked and the engine is turned off. Place a safety warning triangle 50 to 150 meters behind the vehicle. 2. Align the jack with the support point under the car's chassis. 3. Connect the accompanying wrench and sleeve to the back of the jack, then rotate it to adjust the jack's height. Avoid applying excessive force during operation, as this may cause the jack to deform.
17
4
Share

Is it useful to install an engine underguard?

Installing an engine underguard is useful. The engine underguard, also known as an engine protection plate, is a custom-designed protective device for the engine, tailored to the vehicle model and the original mounting points around the engine frame. Its primary design purpose is to prevent damage to the engine caused by protruding rocks on the road surface. Additionally, it helps prevent mud and dirty water from entering the engine compartment during driving, which could lead to engine malfunctions. The functions of the engine underguard include: 1. Keeping the engine compartment clean: While driving, the car inevitably passes through areas with a lot of dust. The underguard helps maintain cleanliness in the engine compartment, making it easier to clean and reducing the buildup of oil sludge. 2. Protecting the engine: When driving at high speeds, sand and stones may be kicked up, which can significantly impact the engine over time. 3. Preventing engine scrapes: When driving on uneven roads, the underguard can protect the engine from being scraped or damaged by the road surface.
4
4
Share

Can the X-Trail's driveshaft be directly replaced if it's broken?

The X-Trail's driveshaft can be directly replaced if it's broken. The driveshaft is a high-speed, minimally supported rotating body in the universal transmission system that transmits power, and its dynamic balance is crucial. The components of the driveshaft include: 1. Universal joint: an essential part of the driveshaft, used in rear-wheel-drive vehicles; 2. Sliding sleeve: welds the splined sleeve to the flange yoke and the splined shaft to the driveshaft tube; 3. Bushing: designed to reduce friction and wear during shaft movement, with a basic function similar to bearings. The X-Trail is a classic SUV introduced by Nissan, inheriting the brand's consistent SUV styling with bold lines. Its front fascia closely resembles that of its larger sibling, the Patrol, especially the grille, maintaining a strong family resemblance. The entire body exudes a rugged yet handsome appearance, complemented by 215/65R16 tires, giving it a tough yet compact feel.
3
2
Share

Where is the Dongfeng Fengshen air conditioning filter located?

The Dongfeng Fengshen air conditioning filter is located behind the glove box on the passenger side. The specific steps for removing the air conditioning filter are as follows: 1. There is a black plastic panel at the upper part of the passenger footwell with two retractable clips; remove the panel by releasing these clips. 2. Then, disconnect the negative terminal of the battery, remove the body control module, and take off the bracket that secures the body control module. 3. Next, remove the panel on the left side of the passenger footwell, which is secured by four screws; unscrew and remove it. Dongfeng Fengshen is an independent mid-to-high-end brand under the Dongfeng Motor Group. Taking the Dongfeng Fengshen Yixuan GS as an example, it is a new national trend intelligent SUV designed for proactive and life-loving smart living enthusiasts. As the first SUV model based on Dongfeng Fengshen's global modular platform, the Yixuan GS combines the spaciousness and off-road capability of an SUV with the comfort and handling of a sedan. It features modern European chassis technology and is equipped with intelligent configurations comparable to its peers.
20
5
Share

What are the reasons for the heavy steering wheel of Honda Civic?

The main reasons for the heavy steering wheel of Honda Civic are dirty power steering fluid and repeatedly turning the steering wheel while stationary or at low speeds. Dirty power steering fluid can cause the steering wheel to feel heavy, and a lack of power steering fluid can also lead to a heavier steering wheel. If the issue is related to the power steering fluid, it should be promptly topped up or replaced. Repeatedly turning the steering wheel while stationary or at low speeds places a significant load on the power steering system, which can cause the steering gear to overheat and enter a protective mode, resulting in heavy steering. This condition usually returns to normal after cooling down, which is a normal phenomenon. The solutions for a heavy car steering wheel are as follows: Top up the hydraulic power steering fluid; replace the circuit fuse; replace the flat bearing and add grease to the kingpin; increase the lubrication of the steering tie rod ball joint. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering column. Steering wheels are mainly categorized into single-spoke, double-spoke, three-spoke, and four-spoke types. Their working principle involves transmitting torque to the rack-and-pinion mechanism, thereby pushing the wheels to turn left or right.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.