What is the Volkswagen Lamando?

1 Answers
Finley
07/30/25 12:44am
Lamando is one of the exclusive models for the Chinese market by Volkswagen, known as Lingdu in Chinese. Here are the relevant details: 1. The Lingdu (Lamando) is a compact new car launched by Shanghai Volkswagen at the Chengdu Auto Show in August 2014. Shanghai Volkswagen defines the Lingdu as the 'first wide-body coupe,' built on the MQB platform, equipped with the EA888-TSI engine, and featuring a wet 7-speed dual-clutch transmission, positioned between the Lavida and the Passat. 2. The current Lingdu comes standard with LED headlights, LED taillights, LED daytime running lights, and supports CarPlay and Car-Life smartphone connectivity.
Was this review help?
2
4
Share
More Forum Discussions

What engine is used in the Haval H6?

The Haval H6 is equipped with two engines: a 1.5T and a 2.0T, with engine models GW4B15A and GW4C20B respectively. Here are the details about these two engines: 1. GW4B15A engine: The actual displacement of the GW4B15A engine is 1499ml, with 4 cylinders arranged in an L-formation and a turbocharged intake system. 2. GW4C20B engine: The actual displacement of the GW4C20B engine is 1967ml, with 4 cylinders arranged in an L-formation and a turbocharged intake system. The GW4C20B engine has 4 valves per cylinder and a DOHC valve train. The engine reaches its maximum power at 5500 rpm and its maximum torque at 3600 rpm.
2
5
Share

What car is the X logo?

The car with the X logo is the Toyota MarkX, which is part of the Toyota lineup. Below is some relevant information about the MarkX: 1. The car featuring the X logo is the Toyota MarkX, the original model of the domestic Toyota Reiz (REIZ). The MarkX is essentially the tenth-generation model of the Mark 2, which should have been called the Mark 2-X. However, Toyota renamed it as part of a comprehensive redesign of the Mark 2. The domestic version, the Reiz (REIZ), derives its name from German, meaning 'charming' and 'stimulating,' while the X symbolizes 'infinite hope.' 2. The MarkX was highly popular in the Japanese market, ranking third in sales among all Toyota models and positioned just below the Crown. However, after the discontinuation of the Reiz in China, the Japanese MarkX was officially discontinued. The MarkX had a 15-year production run at Tianjin FAW Toyota since 2005. It was produced on the same line as the Crown, sharing the same chassis, equipment, and a 6-speed automatic transmission. The MarkX is a classic model of Toyota's high-power rear-wheel-drive cars. 3. Following the discontinuation of the MarkX and Reiz, the Toyota Camry XV70 replaced it in the Japanese market, while the Avalon took its place in the Chinese market. There were also differences in configuration between the Reiz and the MarkX. The Reiz was exclusively rear-wheel-drive and did not offer the MarkX's all-wheel-drive variant. Additionally, the Reiz's engine did not employ direct fuel injection technology, although both models shared the same displacement. Furthermore, the Reiz used the Toyota emblem, whereas the MarkX featured the X logo, leading many Reiz owners to replace their front emblem with the X logo of the original MarkX.
19
2
Share

How to Use Cruise Control in the Old Lavida?

When the vehicle speed exceeds 40 km/h, turn on the cruise switch and press the deceleration button. Below are the detailed instructions: 1. Activating the Cruise Control System Slide the switch to the "ON" position to activate the speed control system. Setting the Cruise Speed After activation, when the car reaches the desired speed, press the "SET" button to maintain this speed continuously. 2. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Upon releasing the pedal, the system will restore the vehicle to the preset cruise speed. 3. If the speed exceeds the cruise speed by more than 10 km/h and maintains this speed for over 5 minutes, the cruise speed must be reset. 4. Reducing Cruise Speed Press the "SET" button to decrease speed by 1.5 km/h; holding the button will continuously reduce speed. Once released, the current speed will be stored in memory.
14
2
Share

Where is the battery located in an Audi A4?

The battery of an Audi A4 is located inside the trunk. Here is some information about the battery: The battery is situated inside the trunk. After opening the trunk, lift the floor panel and remove the spare tire, then take out the plastic cover underneath to reveal the battery. The working principle of a car battery is to convert chemical energy into kinetic energy, providing power to various electrical devices in the car (such as the horn, headlights, air conditioning, cigarette lighter, etc.). Since the battery plays a crucial role in the operation of the vehicle, owners should pay attention to battery maintenance during daily use. Maintenance methods for the Audi A4 battery: 1. In winter, when temperatures are extremely low, avoid parking the car outdoors for extended periods to prevent the battery from freezing and getting damaged. 2. Before turning off the engine, ensure that all electrical devices such as the multimedia system and headlights are turned off to prevent these devices from continuing to operate after leaving the car, which would drain the battery. 3. Remember to turn off the air conditioning before leaving the car; otherwise, the high-power air conditioning will start simultaneously the next time the car is started, placing a significant load on the battery. 4. Charge the battery regularly because even when not in use, the battery discharges slowly. If the battery is frequently in a depleted state, its lifespan will be shortened.
17
1
Share

How to Engage Four-Wheel Drive in a Jeep Wrangler?

Here is the relevant information on how to engage four-wheel drive in a Wrangler: 1. If you need to use four-wheel drive, you should pull the transfer case shift lever backward while driving at low speed, at which point the vehicle will be in four-wheel drive mode. However, four-wheel drive mode should only be used on off-road terrain; on normal paved roads, high-speed two-wheel drive mode should be used. 2. The new Wrangler is equipped with a 2.0-liter turbocharged engine across the lineup, delivering 266 horsepower and a maximum torque of 400 Nm. This engine is paired with an 8-speed automatic transmission. The Wrangler comes standard with a part-time four-wheel-drive system, allowing mode switching. 3. The Wrangler offers high-speed two-wheel drive mode, high-speed four-wheel drive mode, low-speed four-wheel drive mode, and an automatic high-speed four-wheel drive mode. High-speed two-wheel drive mode is suitable for paved roads. High-speed four-wheel drive and low-speed four-wheel drive can be used on off-road terrain. Engaging low-speed four-wheel drive mode amplifies the torque to the wheels, helping the vehicle escape difficult situations smoothly.
4
4
Share

What is the actual 0-100 km/h acceleration time of the Audi S4?

According to official data, the Audi S4 comes with a 3.0T engine and achieves a 0-100 km/h acceleration time of 9.1 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the amount of force available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the BMW 320i has a maximum torque of 205 Nm and a 0-100 km/h acceleration time of 9 seconds. In contrast, the Audi S4 boasts 500 Nm of torque and accelerates from 0-100 km/h in just 4.7 seconds. Transmission efficiency: The transmission acts as the medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi S4 is equipped with a Tiptronic automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the BMW 320i has a power-to-weight ratio of 106 Hp/T and a 0-100 km/h acceleration time of 9 seconds. The Audi S4, with a power-to-weight ratio of 199 Hp/T, achieves 0-100 km/h in 4.7 seconds.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.