What is the Volkswagen car that starts with an S and resembles a Golf?

1 Answers
ChaseMarie
07/24/25 7:48pm
This car is the Volkswagen Scirocco. Overview of the Scirocco's configuration: 1. Exterior: The Scirocco offers a variety of color options including white, red, silver, blue, gray, green, and brown, showcasing individuality to the fullest. Its low and wide body, smooth side lines, and broad rear wheel arches keep this sports car in a "ready to charge forward" stance at all times. 2. Power: It is equipped with the 2.0TSI turbocharged direct-injection gasoline engine, which has won the International Engine of the Year award for four consecutive years. This engine delivers robust performance, with a maximum power of 155 kW (210 horsepower) and a maximum torque of 280 N·m, enabling the Scirocco 2.0TSI to accelerate from 0 to 100 km/h in just 6.9 seconds. The 6-speed DSG dual-clutch automatic transmission ensures continuous and smooth power delivery while allowing for quick gear shifts.
Was this review help?
15
2
Share
More Forum Discussions

Why Can't the Car Windshield Washer Spray in Winter?

If the windshield washer fluid doesn't spray, it may be due to low fluid level. Here are the reasons and solutions for windshield washer fluid not spraying in winter: 1. If the washer fluid is full but still doesn't spray, the nozzle might be clogged with dust. Try using a fine needle to unclog the nozzle. Considering it's winter, the reservoir or pipes might also be frozen. After warming up the car sufficiently, try parking it in the sun. If it starts spraying, it means you need to switch to a higher-grade antifreeze washer fluid. If there's no sound from the motor when trying to spray, and the wipers don't work either, check if the fuse is blown or the motor is damaged. If none of these are the issue and the washer fluid still won't spray, consider the possibility of the pipes being clogged with debris. 2. If the washer nozzle is clogged, you can use a needle or thin wire to unclog it. Locate the nozzle position and gently pry it up with a screwdriver—the nozzle is a snap-fit structure and doesn't require much force. Once the nozzle is lifted, you'll see a small hose connected underneath. Remove the nozzle from the hose directly, but be careful not to let the hose fall into the car, as you would then need to remove the entire panel to retrieve it.
5
0
Share

What are the techniques for shifting gears in a manual transmission car?

Techniques for shifting gears in a manual transmission car are as follows: 1. Seating posture technique: Novices often sit too far forward. After becoming familiar with the vehicle, adjust the seat to the correct position. Place your right foot lightly on the brake pedal, with an obtuse angle of about 120 degrees or more between the thigh and calf (for comfort). When pressing firmly, the thigh and calf should not form a completely straight line; just ensure sufficient and comfortable extension. 2. Starting technique: Unlike automatic transmission cars, when starting a manual transmission car, remember to press the clutch all the way down with your left foot, engage first gear, place your right foot lightly above the accelerator, slowly release the clutch while simultaneously releasing the handbrake and gently pressing the accelerator. After slowly lifting the clutch with your left foot a little, immediately press the accelerator lightly to achieve a smooth start. 3. Hill start technique: The so-called "half-clutch" state may not be suitable for all car models. Therefore, before releasing the clutch on an uphill slope, you need to give some throttle, which is the so-called "double acceleration": after the first acceleration, lift the clutch, pay attention to the changes in the engine sound, stopping the left foot when there is a change is key, and simultaneously accelerating ensures a smooth start. Slowly releasing the handbrake and stabilizing the left foot are crucial for a smooth start.
7
5
Share

How to Set Up Auto-Locking for the Honda Fit?

The Honda Fit does not come with an auto-locking feature, only manual locking is available. If you wish to use this function, you can install a device that plugs into the OBD port. Below is some information about the Fit: 1. As one of Honda's global strategic models, the Fit (FIT) has sold over 4.7 million units in 115 countries worldwide since its launch, making it a true leader in the global compact car market. 2. The Fit (FIT) is based on Honda's GSC (Global Small Car Platform), which is a universal small car platform for global markets.
7
5
Share

What transmission does the 10th-generation Civic use?

The 10th-generation Civic uses a 6MT and CVT transmission. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. The manual transmission primarily consists of gears and shafts, achieving speed and torque variation through different gear combinations. The automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations. In terms of body dimensions, the 10th-generation Civic measures 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm.
9
2
Share

How to remove the cabin air filter of Trumpchi GM8?

Trumpchi GM8's cabin air filter removal method: The cabin air filter is installed behind the glove box on the front passenger seat. Remove the glove box, then use a screwdriver to detach the retaining clip, and you can take out the cabin air filter. The function of the car's cabin air filter is to purify the air entering the cabin from the outside, improving air cleanliness. The Trumpchi GM8 is positioned as a commercial MPV model, with body dimensions of 5066mm in length, 1923mm in width, 1822mm in height, and a wheelbase of 3000mm. The Trumpchi GM8 is equipped with a 2.0-liter turbocharged engine across the entire lineup, paired with an 8-speed automatic transmission.
5
3
Share

Can a China 4 Emission Standard Vehicle Be Transferred?

Can a China 4 Emission Standard Vehicle Be Transferred? Generally, there are no restrictions on the emission standards for used cars being transferred locally. As long as the vehicle has not reached the mandatory scrapping standard, it can be transferred normally. However, if the used car is being transferred from another region, it must comply with the local emission standard policies to be eligible for transfer. Below is relevant information: 1. Cities where China 4 vehicles can be transferred: Generally, cities implementing the China 5 standard do not allow the transfer of such vehicles, nor can they process the transfer procedures. Except for Beijing, Shanghai, Guangdong, Shandong, Fujian, Zhejiang, Jiangsu, Hebei, and Liaoning, China 4 vehicles in other regions can generally be processed for transfer. Of course, it is best to consult the local vehicle management office before the transfer to avoid unnecessary legwork. It should be noted that China 5 vehicles cannot be registered in some provinces or cities. 2. Personal presence is not always required for transfer: The transfer of a vehicle does not necessarily require the owner to be present. If the owner cannot personally handle the transfer procedures for some reason, they can authorize someone else to handle the vehicle's file transfer and relocation procedures. The owner needs to write a power of attorney, which should include a photocopy of their ID card and signature, and provide the original ID card, vehicle registration certificate, and driving license to the authorized person for processing at the vehicle management office.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.