What is the Volkswagen Arteon?

1 Answers
PeterLynn
07/28/25 7:22pm
The Volkswagen Arteon is a mid-size car, with a wheelbase ranging from 2800mm to 3000mm and a body length between 4800mm and 5000mm. The body dimensions of the Volkswagen Arteon are: length 4865mm, width 1870mm, height 1459mm, with a wheelbase of 2841mm, a fuel tank capacity of 66 liters, and a curb weight of 1640kg. The Volkswagen Arteon is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186PS, a maximum torque of 320Nm, and a maximum power output of 137kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
4
1
Share
More Forum Discussions

What Causes the Interior Noise in a Corolla?

Toyota's new Corolla produces noise due to misaligned plastic molds or displacement in the installation of the dashboard, leading to friction and squeezing between components. Below is relevant information: 1. Dimensions: Length/Width/Height: 4180mm/1625mm/1335mm, which is slightly smaller than the current Toyota Corolla. However, with a body height of less than 1.35m, the 86 model appears more slender and flat visually. 2. Powertrain: It is equipped with an inline 4-cylinder DOHC 16Valve engine with a displacement of 1.6L, delivering a maximum horsepower of 130 hp and a maximum torque of 150Nm. The layout is front-engine, rear-wheel drive, achieving a 0-100 km/h acceleration time of 10.3 seconds. It was produced between 1983 and 1987.
7
2
Share

What Current Should Be Set When Charging a Car Battery?

When charging a car battery, the appropriate current depends on the battery's capacity. Generally, the smallest car battery is 36AH, while the largest can be 80AH. For a 36AH battery, a charging current of 4 to 8A is suitable, whereas an 80AH battery requires 8 to 16A for optimal charging. Lifespan of a Car Battery: Under normal usage conditions, a car battery typically lasts between 3 to 8 years. Over time, its internal resistance gradually increases due to sulfation, and its capacity diminishes. Precautions for Using a Car Battery: Always keep the battery clean and dry, ensuring the vent holes remain unobstructed. Avoid continuous use of the starter motor; each use should not exceed 5 seconds, with a 10 to 15-second break between attempts. A fully charged battery with sufficient electrolyte should not be left in a state of undercharge for extended periods. Regular charging is necessary to prevent permanent damage.
12
3
Share

Does replacing a car door refer to replacing the entire door or just the metal sheet?

Replacing a car door refers to replacing the entire door, but it does not include the interior door panel, the glass on the door, the window lift system, or the rubber seals on the door. Car doors are made through a one-piece stamping process, so the metal sheet cannot be replaced separately. Additionally, after replacing the car door, the door needs to be repainted. Maintenance of car doors: During normal use, lubricant should be applied to the door check strap, and the rubber seals on the door should be wiped regularly. If the rubber seals are damaged, they should be replaced promptly. The drainage holes at the bottom of the door should be checked periodically. If they become clogged, rainwater may not drain properly, leading to water accumulation inside the door. Door replacement should be done at a 4S shop because the new doors provided by 4S shops are usually original factory parts. Moreover, new doors come unpainted, meaning the 4S shop will also handle color matching and painting.
17
4
Share

What are the solutions for BMW overheating issues?

Solutions for BMW overheating include cleaning the radiator fins, unclogging the pipelines, and replacing sensors. The specific approach depends on the actual situation. Below are the detailed causes of BMW overheating: If the water temperature is too high, check if there is an issue with the cooling system. First, inspect whether there is visible dirt on the radiator fins in front of the coolant reservoir. Many vehicles with high mileage have their front radiator fins clogged, which affects heat dissipation and ultimately leads to overheating. Another cause is internal pipeline blockage in the cooling system, which hinders proper coolant circulation and results in high water temperature. If dirt is visible on the radiator fins, remove and clean them. If the water temperature remains abnormal after cleaning, the issue may be due to internal pipeline blockage, which requires cleaning the internal pipelines. Overheating can also be diagnosed by reading the data stream via a computer. Typically, the data stream can reveal whether the issue is caused by a faulty water temperature sensor. A malfunctioning water temperature sensor may provide incorrect readings, triggering abnormal alarms in the vehicle. By analyzing the data stream, the specific faulty sensor can be identified and replaced accordingly.
3
4
Share

What is the fuel consumption of the Ford Mondeo Zhisheng 2.3?

Ford Mondeo Zhisheng 2.3 has an actual fuel consumption of approximately 14L per 100 kilometers. The main features of the Ford Mondeo Zhisheng 2.3 are as follows: 1. High safety crash rating and excellent performance: Before the facelift, it had a five-star frontal crash rating and a four-star side crash rating; after the 2007 facelift, both frontal and side crash ratings were upgraded to five stars. To distinguish it from the older models, the name was updated to Mondeo Zhisheng. 2. Spacious interior: The car has a wheelbase of over 2800mm, an interior width of 1.45M, and a height of 1.8M, providing more than 10CM of headroom for passengers. 3. Top-tier performance and handling: Among B-segment cars in a similar price range, it is undoubtedly first-class and among the best.
10
5
Share

What is the actual fuel consumption of the WEY VV7s?

WEY only has the VV7 model in its lineup, and there is no VV7s variant. The VV7 has a fuel consumption of 9.8 liters per 100 kilometers. The VV7 is a midsize SUV with a wheelbase of 2950mm, and its length, width, and height are 4760mm, 1931mm, and 1655mm respectively. Here is an introduction to the WEY VV7: 1. The VV7 is powered by a 2.0-liter turbocharged engine, which delivers a maximum power of 167kW and a maximum torque of 387 Nm. The engine reaches its peak power at 5500 rpm and its peak torque between 1800 to 3600 rpm. This engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission. 2. The VV7 employs a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension enhances the vehicle's handling and driving stability.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.