What is the voice wake-up command for Trumpchi?

1 Answers
DeFernando
07/30/25 1:35am
Trumpchi's voice wake-up command is "Hello, Xiaoqi". In-car Voice Assistant: The most prominent feature of in-car scenarios is that the user's attention is occupied, making screen operations inconvenient. In this context, the in-car voice assistant becomes particularly important. Systems like voice navigation, voice control, and in-car infotainment free the driver's hands while providing convenient travel and entertainment experiences. Wake Word: Multimedia systems in vehicles use wake words. During driving, using the wake word activates the voice assistant, allowing control over various vehicle functions. Once activated through voice wake-up, simply give commands to the voice assistant.
Was this review help?
1
1
Share
More Forum Discussions

What is the ground clearance of the Honda URV?

Dongfeng Honda URV has an unladen ground clearance of 180mm and a minimum ground clearance of 140mm, which is decent in terms of chassis performance. The front and rear suspension forms align with the product positioning. Additional details are as follows: 1. It is equipped with a 1.5T turbocharged engine paired with a CVT continuously variable transmission and a 2.0T turbocharged engine paired with a 9-speed automatic transmission. 2. The configuration supports a four-way adjustable multifunction steering wheel, an 8-inch central color touchscreen integrating Bluetooth phone, navigation system, 360° panoramic imaging, collision warning, lane keeping, blind spot display, and automatic parking assistance among other safety features. 3. The URV chassis adopts a front MacPherson strut and rear double-wishbone suspension combination.
3
5
Share

What is the model of the Volkswagen Golf transmission?

Volkswagen Golf 7 is equipped with a dry 7-speed dual-clutch transmission, model DQ200. The working principle of a dual-clutch transmission can be simply understood as one clutch corresponding to odd-numbered gears and the other clutch corresponding to even-numbered gears. When the vehicle engages one gear, the other clutch and the corresponding next gear are already in a ready state. As soon as the current gear is disengaged, the next gear can be immediately engaged. Therefore, the shifting speed of a dual-clutch transmission is faster than that of a conventional automatic transmission and even a manual transmission. Additionally, although the internal structure of a dual-clutch transmission is complex, its actual size and weight are not significantly increased compared to a manual transmission, so vehicles equipped with a dual-clutch transmission do not add excessive burden. As the leader of Volkswagen's design, the Golf has always represented Volkswagen's new design language, with body dimensions of 4255mm in length, 1799mm in width, and 1452mm in height.
18
4
Share

What is the circuit range performance of the Ford Kuga fuel pressure sensor B?

Fuel pressure sensor B circuit range performance refers to a fault in the low-pressure fuel pressure sensor. Additional information: 1. Principle: The low-pressure fuel pressure sensor is installed in the fuel inlet line leading to the two high-pressure fuel pumps. It measures the fuel pressure in the low-pressure fuel system and sends the signal to the engine control unit. The low-pressure fuel is supplied by the high-pressure pump's guide connection device, and the fuel then enters the low-pressure fuel rail. Both the high-pressure and low-pressure fuel rails are equipped with high-pressure and low-pressure fuel pressure sensors, respectively. The engine control unit adjusts the pressure in the high and low-pressure fuel systems based on these two signals. 2. Function: The engine control unit uses this signal to control the low-pressure fuel system. The engine control unit sends a signal to the fuel pump control unit based on the sensor signal, allowing it to adjust the electronic fuel pump as needed according to this signal.
9
4
Share

Does the Hyundai Verna only have one reverse light?

There are three brake lights on the Verna. They are located at both ends of the rear of the car and the upper part of the rear. Brake lights are generally installed at the rear of the vehicle, with the main color being red to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, thereby preventing rear-end collisions. The solutions for a continuously lit brake light are as follows: 1. Check the brake fluid. If the brake light is on due to insufficient brake fluid, replenishing the brake fluid in time will turn off the brake light; 2. Check the brake switch. After disassembling and repairing the switch, the brake light can be turned off; 3. Check the brake pads to see if they are worn or aged. If the thickness of the brake pads is below the specified value, they should be replaced promptly. After replacing the brake pads, the brake light will turn off.
6
0
Share

Where can I find the vehicle production date?

Vehicle production date can be checked from two locations: the co-driver side and the vehicle certificate. Details are as follows: 1. Below the B-pillar on the co-driver side, visible when opening the door. This nameplate only shows year and month, and includes the vehicle's VIN. 2. The certificate that comes with new vehicles, located at the upper right corner of the certificate. The production date marked here can be precise down to year, month, and day. Note: This doesn't apply to all vehicle models. When new vehicles arrive at dealerships, there will be a paper nameplate on the windshield in front of the driver's seat. This paper nameplate displays the VIN and MIIT fuel consumption. If the bottom of the paper nameplate shows the date down to year, month, and day, then this production date can serve as a reference. If the nameplate only shows year and month, it cannot be considered as the production date.
18
3
Share

What causes the clicking sound in the rear wheels when braking in a Volkswagen?

Volkswagen rear wheels making a clicking sound when braking could be due to abnormal noise from the clutch, drive shaft, differential, or even the tires. If the noise only occurs during braking, it is necessary to check whether there are any foreign objects stuck between the brake pads and brake discs. If the brake system is functioning properly, the tires and suspension system should be inspected. During braking, the vehicle's center of gravity shifts forward, increasing pressure on the front axle. If the noise occurs every time you brake, there may be an issue with the front axle. In daily use, if the car produces abnormal noises, it is important to promptly visit a 4S shop for inspection and repair. After replacing the brake pads, clicking sounds may occur during each brake application as the new brake pads have not yet adapted to the brake discs.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.