What is the voice wake-up command for the Tayron?

Detailed Explanation of Baojun 560 Interior Buttons?

Here is a detailed explanation of the Baojun 560 interior buttons: Steering wheel button functions: The cruise control is adjusted via buttons on the left side of the steering wheel, while the audio functions are controlled by buttons on the right side. Dashboard mode and brightness adjustment: The dashboard has three modes: instant fuel consumption, tire pressure monitoring, and driving range. Press the mode switch button on the dashboard to toggle between them. For brightness adjustment, simply rotate the lever. One-touch window lowering: To use this feature, press and hold the unlock button on the remote control when the doors are unlocked, and all windows will lower automatically. However, raising the windows requires manually starting the ignition and then lifting them.

10

0

Share

What Are the Conditions for Activating Volkswagen's Coasting Mode?

The gear selector must be in position D to activate Volkswagen's coasting mode. Method to Activate Coasting Mode: Lift your foot off the accelerator pedal. The engine power is disconnected and idles. The vehicle coasts without engine braking, utilizing its inertia to save fuel through anticipatory driving. With the engine power disconnected and no longer braking the vehicle, it can coast for a longer distance. Precautions When Activating Coasting Mode: Do not coast in neutral. When coasting in neutral, the automatic transmission oil pump stops working due to the gear position, causing all components inside the transmission to lose cooling. This can damage internal parts of the automatic transmission, leading to issues like wheel slippage and posing certain safety risks.

14

2

Share

What is the factory model number of the BMW 5 Series?

The factory model number of the BMW 5 Series is BMW7201LM. Power of the BMW 5 Series: The powertrain of the BMW 5 Series has been further enhanced. The top-tier 545i version is equipped with a V8 engine from the 7 Series, delivering a maximum power output of 245 kW (333 horsepower) at 6100 rpm and a peak torque of 450 Newton-meters at 3600 rpm. It boasts a top speed of 250 km/h and accelerates from 0 to 100 km/h in just 5.9 seconds. Models of the BMW 5 Series: The BMW 5 Series includes imported models like the BMW 520, and domestically produced models such as the BMW 525, BMW 530, and BMW 540. Among these, the 525 is powered by a lower-spec 2.0T low-power engine, while the 530 and 540 feature a 2.0T high-power engine and a 3.0T engine, respectively. Currently, there are four known models of the BMW 5 Series.

5

3

Share

What is the ground clearance of the Geely Emgrand?

Geely New Emgrand has a ground clearance of 167mm. Minimum ground clearance: The New Emgrand's chassis suspension system adopts a combination of front MacPherson independent suspension and rear torsion beam non-independent suspension. Among the current types of vehicles sold in China, the general minimum ground clearance ranges from 100-220MM, mainly due to different vehicle models. Advantages of high car ground clearance: The advantage of a high car ground clearance is strong passing ability; in addition to being suitable for urban driving, it also performs well on rough roads with poor conditions. Disadvantages of high car ground clearance: The drawbacks include higher costs, poor stability of the body at high speeds, and less easy control of steering roll compared to low ground clearance. Therefore, high-performance vehicles are equipped with air suspension, where the chassis is high at low speeds and automatically lowers at high speeds, combining both passing ability and handling performance.

13

4

Share

How to Distinguish Car Power?

Car power can be distinguished by observing the vehicle's engine parameters, such as the number of cylinders, displacement, maximum horsepower, maximum power, maximum torque, maximum power RPM, maximum torque RPM, and engine compression ratio. Higher values indicate stronger engine power and higher fuel consumption. Methods to enhance car power: 1. Engine Modification: The engine modification mentioned here does not refer to altering piston cylinders, etc., as that is illegal. The most effective way to boost power is by upgrading the ECU program. Upgrading the ECU program can alter the engine's ignition timing, fuel injection timing, RPM limit, torque limit, etc. 2. Ignition System Modification: The ignition system is a crucial component of the engine. It includes the power source, ignition trigger signal, ignition timing control signal, high-voltage ignition coil, high-voltage wires, and spark plugs. The quality of ignition performance and the timing of ignition affect fuel combustion efficiency, indirectly influencing the engine's power. 3. Intake Modification: For small-displacement naturally aspirated engines, modifying the intake system is an effective method to enhance power, aiming to increase the engine's air intake volume.

5

Share

What Causes Motorcycle Coolant Leakage?

If a coolant leak is detected, the best course of action is to visit a professional repair shop for maintenance, where targeted repairs can be made based on the specific cause of the leak. Coolant Replacement Method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes. Special attention should be paid to the five-way hose, which gets its name from the five connections it has to various parts. The coolant flows through this hose before being distributed to different parts of the motorcycle to perform its function. If there is any sign of coolant leakage in this section, the hose should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add water to the coolant reservoir and continue filling it until clean water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Keep adding clean water until the outflow is clear. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level may drop as air is purged from the cooling system. Top up the coolant to the "MAXT" mark on the reservoir.

8

5

Share

What is the voice wake-up command for the Tayron?

Detailed Explanation of Baojun 560 Interior Buttons?

What Are the Conditions for Activating Volkswagen's Coasting Mode?

What is the factory model number of the BMW 5 Series?

What is the ground clearance of the Geely Emgrand?

How to Distinguish Car Power?

What Causes Motorcycle Coolant Leakage?

Is Haval a Subsidiary of Changan?

What to Do If You Lose Your Electric Car Key and Have No Spare?

What is the top speed of the BMW 5 Series?

What is the Chery QQ car?