What is the voice wake-up command for the Buick GL8?

2 Answers
LilyFitz
07/24/25 12:09am
Buick's voice wake-up command is "Hello Buick", which will activate the voice assistant. Below is an introduction to the in-car voice assistant and wake-up commands: In-car Voice Assistant: The most prominent feature of in-car scenarios is that the user's attention is occupied, making screen operations inconvenient. In this context, the in-car voice assistant becomes particularly important. Voice navigation, voice control, in-car infotainment systems, and other interactive systems not only free the driver's hands but also provide a convenient and enjoyable driving experience. Wake-up Command: Multimedia systems in cars use wake-up commands. While driving, using the wake-up command can activate the voice assistant, allowing the driver to operate various car functions. After activation via voice command, simply give instructions to the voice assistant.
Was this review help?
2
5
Share
GarrettRose
08/10/25 7:57pm
Speaking of the voice wake-up feature in the Buick GL8, as an ordinary owner who has driven this car for over a year, I simply say ‘Hello Buick’ whenever I want to use the voice function, and it responds immediately. It helps me set navigation routes, switch songs, or adjust the air conditioning temperature, which is incredibly practical—especially in traffic jams, as it keeps my hands free from the screen and enhances safety. I recommend practicing the wake-up phrase in the infotainment settings before long trips because it might occasionally misrecognize commands if the cabin noise is too loud. Overall, the system is simple to use and even connects to OnStar services, allowing voice assistance in emergencies. In short, ‘Hello Buick’ isn’t just a wake-up phrase; it makes driving smarter and smoother, perfect for drivers like me who value convenience.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Does Replacing the Engine Affect the Car?

Replacing the engine does not affect the car as long as the installation is done correctly. Apart from the engine, other components such as the transmission, drive axle, steering mechanism, and braking system generally remain unchanged. However, the new engine requires a break-in period. According to relevant regulations, the vehicle owner must apply for a modification registration with the local vehicle management office within ten days after replacing the engine. The car engine is the device that provides power to the car, acting as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental performance. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others.
19
4
Share

What kind of oil should be used for the LaCrosse?

LaCrosse uses 5W30 engine oil. The number 5 indicates that it can be used at temperatures above -30 degrees Celsius, W stands for winter, and 30 represents the viscosity of the oil at 100 degrees. The higher the number, the higher the viscosity of the oil, the better its ability to withstand high temperatures, and the better its high-temperature protection performance. The LaCrosse is a model under the Buick brand, with a body length, width, and height of 5026mm, 1866mm, and 1459mm respectively, a wheelbase of 2905mm, and a fuel tank capacity of 60 liters. The LaCrosse is equipped with a General Motors 1.5T direct-injection turbocharged engine paired with a 9-speed intelligent transmission for efficient driving performance.
1
4
Share

How Many Liters of Oil Does the Octavia Transmission Need?

Octavia transmission oil requires approximately 4 liters. The following is an introduction about transmission oil: Characteristics of transmission oil: Transmission oil is a lubricant used to keep the gear system clean, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. Depending on the transmission structure, transmission oil is categorized into automatic transmission fluid (ATF) and manual transmission fluid. Transmission oil replacement: Under normal driving conditions, the temperature of automatic transmission fluid rises to about 80 degrees Celsius, which is the normal operating temperature for most ATF. However, if the temperature rises higher, its service life will decrease. It is generally recommended to replace the transmission oil every 80,000 kilometers.
4
0
Share

What is the shelf life of opened motor oil?

Opened motor oil has a shelf life of six months to one year, while unopened motor oil typically lasts around five years. Once opened, the shelf life of motor oil is significantly reduced. Opened motor oil tends to absorb moisture from the air, accelerating oxidation and deterioration. Normally, motor oil contains less than 0.03% water. When the water content exceeds 0.1%, the additives in the oil will fail, leading to oil deterioration. The primary functions of motor oil are to reduce friction and wear on moving parts, remove sludge (one of the functions of dispersants) and varnish (detergents) from the engine, neutralize acids produced by fuel and lubricant oxidation (detergents), improve piston ring sealing, and cool the engine by carrying away heat from moving parts.
17
5
Share

Which gear to use for starting on a slope with a manual transmission?

When starting on a slope with a manual transmission, use the 1st gear. The steps for starting a manual transmission car are: 1. Press the clutch; 2. Push the gear lever inward with your right hand, then push it up into 1st gear; 3. Turn on the left turn signal; 4. Honk the horn; 5. Release the handbrake; 6. Steady the throttle; 7. Lift the clutch pedal. A manual transmission, also known as a manual gearbox, requires manually moving the gear lever to change the gear meshing device inside the transmission, altering the gear ratio to achieve the purpose of shifting gears. The working principle of a manual transmission involves using the shift fork to change the transmission ratio or gear ratio of the meshing gears, thereby altering the driving torque to suit different operating conditions.
12
4
Share

What Causes an Automatic Transmission Car Not to Move When Shifting to Reverse and Accelerating?

Clutch slippage or insufficient power. Below are the relevant explanations: 1. Main manifestations of clutch slippage: Clutch slippage is primarily characterized by the vehicle's inability to increase speed in response to the engine's rising RPM during acceleration. The engine's power cannot be fully transmitted to the driving wheels, resulting in weak driving performance, especially noticeable when going uphill. 2. Insufficient power: If the car does not accelerate when the throttle is pressed, attention should also be directed to the engine. The source of power comes from fuel combustion, and the engine is responsible for supplying fuel and converting chemical energy into mechanical energy. Therefore, when the car exhibits weak acceleration or slow speed increase, the engine system should be a key focus for inspection.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.