···
Log in / Register

What is the vision requirement for obtaining a C1 driver's license?

4 Answers
KaydenFitz
09/03/2025, 11:04 PM

C1 driver's license requires a naked eye vision of 4.9 or above. If the naked eye vision does not meet the standard, wearing corrective glasses or undergoing myopia correction surgery is allowed, as long as the corrected vision exceeds 4.9. Permitted vehicle types: The C1 driver's license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special operation vehicles; small passenger vehicles with a seating capacity of 9 or fewer people. C1 driver's license does not permit driving: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not allow driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests on memory, judgment, and reaction abilities.

Was this review help?
19
1
Share
Arianna
09/16/2025, 12:14 AM

The vision standards for obtaining a C1 driver's license are quite important. Having taken the test twice myself, I can tell you from personal experience that the requirement is to have uncorrected vision of at least 4.9 in both eyes, or corrected vision (with glasses or contact lenses) no lower than 4.9 to pass. In terms of color vision, you must have normal color discrimination without color blindness, as you need to distinguish traffic light colors while driving. If your vision doesn't meet the standard, you can get an eye exam and prescription glasses, then wear them during the test. Don't underestimate this test - I've seen friends fail temporary vision checks, which delayed their license acquisition. For safe driving, it's recommended to test your vision yourself one month before the exam to ensure everything is in order. After all, good vision is fundamental for road safety, and you'll regret it if problems arise. Stay calm and follow the regulations, and you'll be fine.

Was this review help?
17
3
Share
Expand All
LeEliza
10/30/2025, 12:49 AM

As a new driver who just got my license, let me share the vision requirements for obtaining a C1 driver's license: The standard is that both eyes must have uncorrected or corrected vision of at least 4.9. If you don't meet the standard, wearing glasses will suffice. You also need normal color vision without any color blindness defects. During my test, I wore my nearsighted glasses and passed easily by reading the eye chart clearly. Remember to get an eye exam and proper glasses in advance to avoid issues on test day. Vision testing is the first step in the licensing process—don't underestimate it, or it may delay your driving practice. Good vision is crucial for reading road signs and reducing risks while driving. I now get regular eye checkups to maintain my driving condition. In short, prepare your vision well to pass this step smoothly.

Was this review help?
17
1
Share
Expand All
McSawyer
12/12/2025, 11:57 PM

The vision standards for a C1 driver's license are clearly defined: the visual acuity of both eyes must not be lower than 4.9, either uncorrected or corrected. Normal color vision without color blindness is crucial. It is recommended to check your vision before applying to ensure compliance. Most people can address vision issues by wearing glasses—safety first, do not overlook this requirement. Failing to meet the vision standards will result in direct disqualification, so preventive measures should be taken in advance.

Was this review help?
15
3
Share
Expand All
More Forum Discussions

What Causes the Maintenance Light to Illuminate in Haval Big Dog?

Haval Big Dog's maintenance light illuminates to remind the owner that maintenance is required. Below are the specific impacts of not adhering to the maintenance schedule: 1. Bearing labor costs: For vehicles within the warranty period, failure to perform basic maintenance on time means that once a malfunction occurs, the owner will need to pay for parts and labor fees at the 4S shop. If the issue is related to circuitry, the manufacturer will not be responsible. 2. Compromised driving safety: As engine oil comes into contact with air and is exposed to heat, it gradually oxidizes. Over time, the oil accumulates acidic substances, sludge, and iron particles, causing it to darken and lose viscosity. Prolonged failure to change the oil may lead to clogged oil passages, resulting in dry friction in the engine and severely affecting its lifespan. 3. Smoke and fire hazards: When the cooling efficiency of the coolant declines, it is prone to forming scale. Continuing to drive with an overheated engine can lead to smoke or even fire.
7
1
Share

What Causes the Left Side to Be Wider Than the Right Side When Reversing into a Parking Space?

What causes the left side to be wider than the right side when reversing into a parking space is that the steering wheel is turned too early during the reversing process. The direction should be turned a bit later to ensure that the left and right distances are equal after the vehicle is parked. Below is some information about garages: 1. Introduction: A garage is generally a place where people park their cars. 2. Function: It reduces the damage caused by natural conditions to the vehicle. Prolonged exposure to the sun greatly affects the car's paint, especially the corrosion from rain acid and the direct exposure to strong summer sunlight, which can quickly oxidize the car's paint surface, causing the vehicle to lose its shine. 3. Conditions: There may be certain fees involved.
6
5
Share

Where to Set Up Automatic Mirror Folding When Locking the GL8?

gl8's automatic mirror folding when locking can be set up in the central console. Below are the specific details about the Buick GL8: 1. Vehicle Positioning: The Buick GL8 is a mid-to-high-end MPV launched by SAIC General Motors Buick. 2. Power Specifications: This vehicle is equipped with a 2.0T SIDI direct-injection turbocharged engine, which delivers a maximum power of 191kW and a maximum torque of 350 Nm. The engine is paired with a 6-speed automatic transmission. During operation, the engine reaches its maximum power output at 5400 rpm and its maximum torque output between 2000-5000 rpm.
6
0
Share

Is it necessary to install mud flaps?

Mud flaps can be installed without considering high-speed conditions. The following are the advantages of mud flaps: 1. Protect the car paint: After installation, mud flaps protrude about 5 cm from the car body, effectively reducing mud splashing onto the side of the car, maintaining the car's appearance, and preventing flying stones from scratching the car's chassis and paint. 2. Second function: They can prevent mud from splashing onto the tie rods and ball joints, causing premature rust. 3. Third function: Reduce the frequency of car washes (this is not absolute as it depends on car washing habits). They can minimize the impact of dirt on the car's appearance.
5
4
Share

What are the differences between the 911 Turbo and Turbo S?

Here are the specific differences between the Porsche 911 Turbo and Turbo S: 1. Displacement: The Porsche Turbo has a displacement of 3.8L. The Porsche Turbo S has a displacement of 3.6L, meaning the Turbo has a higher displacement. 2. 0-100 km/h acceleration: The Porsche Turbo accelerates from 0-100 km/h in just 3.0s. The Porsche Turbo S does it in 4.2s, making the Turbo faster in acceleration. 3. Maximum torque: The Porsche Turbo has a maximum torque of 650 Nm. The Porsche Turbo S has a maximum torque of 620 Nm, indicating that the Turbo is more powerful.
6
1
Share

After a major engine overhaul, should cold running-in or hot running-in be performed first?

After a major engine overhaul, cold running-in should be performed first, followed by hot running-in. Below are some introductions about cold and hot running-in: 1. Avoid high speeds: Mechanics at repair shops usually advise that overhauled engines have speed limits, try to keep it below 80 kilometers per hour, and also avoid letting the engine speed exceed 3000 RPM. 2. Avoid emergency braking: Emergency braking not only impacts the braking system during the running-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers after the overhaul. 3. Pay attention to oil maintenance: Use high-quality, high-cleanliness oil for the car, which should not be lower than the manufacturer's specified grade. Avoid using oils that contain anti-wear additives or various other additives to prevent further damage to the engine.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.