What is the violation code for occupying lanes?

3 Answers
LaVivian
07/25/25 6:59am
The violation code for occupying lanes is 1018. Penalties for occupying lanes: In general, a warning or a fine will be imposed. Only when occupying a dedicated emergency lane will the penalty be 6 demerit points and a fine, according to the relevant provisions of the Road Traffic Safety Law. Definition of occupying lanes: Motor vehicles occupying non-motorized vehicle lanes, private cars occupying bus lanes, normal driving occupying overtaking lanes, or large turns occupying straight lanes. When driving on highways, motor vehicles are not allowed to drive or park in emergency lanes unless in emergency situations. Motor vehicles involved in accidents or malfunctions that require stopping to wait for rescue may temporarily park in the emergency lane. Emergency lanes are reserved for police cars, fire trucks, ambulances, and engineering rescue vehicles performing urgent tasks.
Was this review help?
8
0
Share
OJayla
08/11/25 1:16pm
The most common illegal lane occupation violation code we encounter while driving is usually 1344, which refers to the offense of not driving in the designated lane, such as occupying the emergency lane on highways or crossing lane markings when changing lanes on urban roads. I've personally seen many drivers commit this mistake, with fines typically around 200 yuan and a 3-point deduction, which can go up to 500 yuan in severe cases. In real life, crossing lane markings when changing lanes can easily lead to scratches, while occupying the emergency lane is even more dangerous as it hinders the passage of rescue vehicles. Therefore, it's essential to observe road signs in advance, keep the vehicle within the lane, and develop good driving habits to save a lot of trouble and money. On a personal note, having driven for over a decade, I've learned that regularly checking the vehicle's condition and using traffic management apps to look up the latest codes is also very useful.
Was this review help?
11
0
Share
Expand All
VonRachel
09/27/25 5:49am
As an ordinary car owner, I once received a penalty for occupying the wrong lane, with violation code 1344 indicating failure to drive as prescribed. It happened during rush hour when I accidentally entered a bus-only lane. After the fine and penalty points, I started taking it seriously and learned that such behavior carries high risks, especially in rainy weather when it's easy to lose control. I recommend that new drivers download the Traffic Management 12123 APP, where entering your license plate number allows you to check violation details, or visit local traffic police stations for inquiries to prevent violations. Always pay attention to road signs and use navigation alerts for lane selection—simple steps to avoid problems, ensuring safety and peace of mind.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What are the methods to eliminate odors inside a car?

Methods to eliminate odors inside a car include: 1. Place fruits with strong adsorption capabilities such as grapefruit peel, pineapple, and lemon in the car; 2. Use white vinegar in the car, which has sterilizing and cleaning properties; 3. Utilize activated charcoal to remove odors; 4. Remove protective films inside the car; 5. Open windows for ventilation; 6. Spray an appropriate amount of air freshener. Causes of odors in a car: 1. Overheated wires or short circuits in electrical components; 2. Dirty air conditioning filters or air ducts; 3. Malfunctioning tires or rubber belts, producing a burnt rubber smell; 4. Damaged fuel tank or leaks in the fuel supply system; 5. Leakage or shortage of electrolyte; 6. Burnt clutch plates or failure to release the handbrake.
8
5
Share

What are the differences between the x328i Sport and Luxury models?

x328i Sport and Luxury differences are as follows: 1. Steering Wheel: The biggest difference between the X328i Sport and 28i Luxury is the steering wheel. The 28i Luxury uses the most standard BMW steering wheel, while the Sport model features a "T-shaped design," also famously known as the "T-bar" steering wheel, with an exclusive "M" logo. The x328i Sport also includes paddle shifters, which the Luxury model lacks. 2. Exterior: First, both the Luxury and Sport packages adopt the kidney grille design. However, the Luxury package uses chrome-decorated grilles, whereas the Sport package has blacked-out grilles. Secondly, the Sport package features exclusive "M" logos on the sides and tire sidewalls, while the Luxury package has a more conventional multi-spoke design. The rear of the Luxury package adopts a dual-light strip style with a more rugged contour, an aluminum roof rack, and chrome door trims. The Sport package, on the other hand, has a floating roof design with a smoother contour.
5
4
Share

What is the tire specification of Wuling Zhiguang?

There are two tire specifications for Wuling Zhiguang, namely 155R13LT and 165/70R13. In 155R13LT, the first number 155 indicates the tire width is 155MM, the middle letter "R" represents a radial tire, 13 indicates the rim diameter is 13 inches, and LT stands for light load tire. In 165/70R13, the first number 165 indicates the tire width is 165MM, 70 represents the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, 13 indicates the rim diameter is 13 inches, and the middle letter "R" represents a radial tire. Wuling Zhiguang rims are made of steel, which is economical and cost-effective, featuring a classic design. None of the models come with a spare tire as standard. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the rim, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are concealed, at this point the tire replacement is complete. In addition to the model, the tire is also marked with the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".
15
3
Share

What to Do When the Engine Warning Light Comes On in a Mercedes-Benz?

If the engine warning light comes on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for issues such as shaking, black smoke, or difficulty starting. If any of these problems are present, avoid restarting the engine. Note: If the light is red, do not restart the engine under any circumstances. If the engine is running normally and the car can still be driven, take it to a service center as soon as possible to diagnose the issue. The service center can easily read the fault codes using a portable diagnostic tool, allowing for targeted repairs. If the engine is running normally, the owner can also try gently reconnecting the wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may reset the light. Generally, the engine warning light may come on due to the following seven reasons: 1. Sensor malfunction: This includes sensors such as the coolant temperature sensor, crankshaft position sensor, air flow sensor, intake temperature sensor, and oxygen sensor. If these sensors are damaged, have poor connections, or lose signal, the car's ECU cannot accurately obtain engine data, triggering the warning light. 2. Fuel or oil quality issues: Using fuel or oil that does not meet the manufacturer's specifications may cause engine wear, leading to the warning light. 3. Poor combustion of the air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. 4. Turbocharger issues: Problems with the intake boost system or turbocharger can also trigger the warning light. The most common issue is a damaged turbocharger, accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Intake issues: If the engine's air intake is obstructed, it may lead to clogged engine passages, potentially triggering the warning light. A dirty or uncleaned air filter can cause intake problems. 6. Exhaust issues: Exhaust system faults can also cause the warning light to come on. Common causes include a faulty rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings. The catalytic converter is the most frequent culprit, often due to the use of leaded gasoline, lead- or silicon-containing lubricant additives, physical damage, or fuel system issues. 7. Anti-theft system malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not operate correctly, and the warning light will illuminate.
7
2
Share

Which Toyota models are hybrid?

Toyota hybrid models include the Levin Hybrid, Corolla Hybrid, Camry, RAV4 Rongfang, Avalon, Wildlander, and others. Hybrid cars offer excellent fuel efficiency: Generally, for cars with the same displacement and model, the hybrid version can save up to 30% more fuel, which is why many consumers opt for hybrid vehicles. Hybrid cars have strong endurance capabilities: Compared to plug-in hybrid models, hybrid vehicles have far greater endurance. Especially in cases where charging infrastructure is not yet fully developed, hybrid cars are more convenient and easier to operate, offering significant advantages.
4
0
Share

What car is represented by a single vertical bar?

A single vertical bar represents the WEY automobile. Brand Design: The WEY brand logo (designed by Dongdao), while appearing as a simple Arabic numeral "1", actually embodies deeper symbolic meanings. Logo Design Significance: WEY brand adopts a "vertical" logo. Great Wall Motors explains its inspiration comes from WEY's hometown—Baoding. In front of the Zhili Governor's Office in this ancient city once stood the tallest flagpole in the nation. Drawing from tradition, it expresses WEY's heartfelt tribute to its hometown Baoding. Simultaneously, the brand logo carries a beautiful vision—WEY's pursuit and commitment is to establish China's luxury SUV.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.