···
Log in / Register

What is the vehicle width light?

4 Answers
DelJustin
07/29/25 7:57am

Vehicle width lights refer to the front position lights and rear position lights on a car. In fact, marker lights and width lights are quite similar. The location of width lights varies depending on the vehicle model. On small cars, width lights are commonly known as small lights. For larger vehicles due to their size, the lights on the front and rear sides are referred to as width lights. On trucks, width lights are commonly called side lights. Relevant information about vehicle lights is as follows: 1. Introduction: Vehicle lights refer to the lamps on a vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movement indications. 2. Reverse light: The reverse light automatically turns on when the driver engages the reverse gear. It is a white transparent light primarily used to alert vehicles behind that the car is reversing.

Was this review help?
20
1
Share
McBlakely
08/13/25 3:09am

The vehicle's position lights, also known as parking lights or side marker lights, are those small lamps located at the front and rear of the car. They help others identify your vehicle's position during nighttime or foggy conditions. Though not as bright as headlights, they play a crucial role—especially when parked or driving in low-light situations—to prevent collisions. Position lights are standard equipment in most vehicles, automatically activating upon ignition or when ambient light dims, using either small bulbs or LEDs. I often remind friends to check if they're functioning properly, as failure to maintain them can be both dangerous and subject to fines. Modern vehicles often integrate these lights with automatic lighting systems for convenience, but regular maintenance remains essential—never underestimate their importance.

Was this review help?
1
0
Share
Expand All
MacHayden
10/05/25 3:26am

The position lamp, also known as the side marker light, is the small light at the front and rear of the car. Its key function is to make the vehicle's outline visible to others in poor visibility conditions. From a safety perspective, turning it on during rainy nights or foggy days can significantly reduce accident rates. I once almost had an accident because I didn't turn it on. The law requires its use under certain circumstances, so developing good habits is important. It consumes little electricity, but don't neglect checking it—replace it promptly if it's broken. Many cars now use LEDs, which have a longer lifespan. Remember not to confuse it with brake lights or headlights when adjusting the lighting settings.

Was this review help?
3
4
Share
Expand All
StReagan
11/18/25 4:58am

When I first started driving, I didn't understand what the width indicator lights were. Later, I learned they are small lights that indicate the vehicle's width in low-light conditions. They are usually activated by a control lever near the steering wheel. Once turned on, the front and rear positions of the car become clearly visible. Beginners often forget to use them, but making it a habit to turn them on during cloudy days or at dusk can prevent accidents. If the lights don't work, it might be due to a burnt-out bulb, which you can check yourself or have repaired at a shop. Safety comes first—don't skimp on these small details.

Was this review help?
14
1
Share
Expand All
More Forum Discussions

What is the horsepower of the Geely Boyue?

Geely Boyue has a maximum horsepower of 163ps. Taking the 2021 Geely Boyue as an example, it is a 5-door, 5-seater compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1575kg. The 2021 Geely Boyue is equipped with a 1.8t turbocharged engine, with a maximum power of 120kw, maximum power speed of 5500rpm, maximum torque speed ranging from 1500rpm to 4500rpm, and is paired with a 6-speed manual transmission.
3
3
Share

How is a car battery charged?

Car battery charging method is: 1. Open the front cover of the car and take out the battery charger; 2. Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Methods to check for insufficient car battery power are: 1. The car horn sound becomes weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging are: 1. Battery voltage below 10% of the rated voltage will cause battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoid removing the battery to prevent data loss.
16
0
Share

What Causes the Rattling Noise When the Atenza Goes Over Bumps?

Atenza's rattling noise when going over bumps is caused by loose component screws. It is necessary to visit a 4S shop to check the loose parts and tighten the screws. Below is a related introduction to the Atenza: 1. Body Dimensions: The Atenza has a body length, width, and height of 4870mm, 1840mm, and 1445mm respectively, with a wheelbase of 2830mm. 2. Powertrain: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine; paired with a 6AT transmission. (1) 2.0-liter naturally aspirated engine: The engine has a maximum power of 158 horsepower and a maximum torque of 202 Nm. The engine's maximum power speed is 6400 rpm, and the maximum torque speed is 4000 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. (2) 2.5-liter naturally aspirated engine: The engine has a maximum power of 192 horsepower and a maximum torque of 252 Nm. The engine's maximum power speed is 6100 rpm, and the maximum torque speed is 3250 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
8
0
Share

When should the original timing belt be replaced?

The original timing belt should be replaced when the vehicle reaches 80,000 kilometers. The functions of the timing belt are: 1. To drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times; 2. To guarantee the engine cylinders can properly intake and exhaust air. The replacement procedure for the timing belt is: 1. Remove the valve cover and the timing belt housing; 2. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with the fixing bolt; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts horizontally; 4. Remove the old belt and install the new one; 5. Ensure there is no gap at the crankshaft position sensor during installation to avoid triggering fault codes.
20
1
Share

How to Install a Belt?

The method for installing a belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and smoothly guide it upwards from the side opposite the tensioner pulley to place it on the camshaft pulley; 3. Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and matching a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the generator belt will be visible; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.
14
0
Share

How to Disassemble the Wuling Hongguang Key?

The method to disassemble the Wuling Hongguang key is: 1. Use a flathead screwdriver to pry open the side opening of the key; 2. Open the key casing along the pried gap. Taking the 2019 Wuling Hongguang S3 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4655mm, width 1735mm, height 1790mm, a wheelbase of 2800mm, a fuel tank capacity of 49 liters, and a curb weight of 1380kg. The 2019 Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, a maximum torque of 140Nm, and is paired with a 6-speed manual transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.