What is the vehicle scrapping time limit?

1 Answers
DeMichael
07/29/25 3:14pm
Non-commercial vehicles and commercial vehicles have different scrapping time limits, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat cars and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage time limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping process. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial cars, and wheeled special machinery vehicles also have no usage time limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping time limit of 8 years, medium-sized taxi passenger vehicles 10 years, and large taxi passenger vehicles 12 years. Public bus passenger vehicles have a scrapping time limit of 13 years, other small and micro commercial passenger vehicles 10 years, and large and medium-sized commercial passenger vehicles 15 years. Micro commercial trucks have a scrapping time limit of 8 years, light and large commercial trucks 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping time limit. For vehicles that have not reached the scrapping time limit, after inspection by the motor vehicle inspection office, if they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Change Form", "XX Province Vehicle Renewal Technical Inspection Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle cannot be driven back to the registration location due to damage, the owner can deliver the vehicle to a local motor vehicle recycling company for scrapping. Commercial vehicles converted to non-commercial vehicles must be scrapped according to the original commercial vehicle scrapping time limit. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a new vehicle. The following conditions must be met: (1) The application must be submitted within six months after the transfer or cancellation; (2) The owner must have owned the original vehicle for more than three years.
Was this review help?
13
5
Share
More Forum Discussions

What are the consequences of oil leakage from spark plugs?

If oil leakage from spark plugs is not addressed, it can lead to poor ignition and abnormal engine operation. Steps to replace spark plugs: Open the hood, lift the plastic engine cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order and secure the cover. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance to assess its condition. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is coated with oil or deposits but is otherwise undamaged, it can be reused after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs like blistering, black streaks, cracks, or melted electrodes, the cause of the damage should be identified and rectified before replacing the spark plug. Additionally, if the spark plug appears black as if smoked, it indicates an incorrect heat range selection or a rich fuel mixture, possibly with oil seepage.
16
3
Share

What does the C2 license Subject 2 test include?

The C2 Subject 2 test consists of 4 items: reverse parking, parallel parking, curve driving, and right-angle turns. Some regions also include highway toll card collection. Compared to the C1 manual transmission test, it excludes the hill start. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess hill start and stop. Reverse parking is one of the more challenging items in the Subject 2 test, which is why many test centers place it as the first item. The requirement is to follow the designated route and sequence, ensuring the vehicle is fully parked without crossing lines, scraping lines, or stalling. Students should slow down, observe the left and right rearview mirrors before fully parking, identify the parking points, and adjust the vehicle decisively. Parallel parking focuses on aligning the front line of the parking space with the rear wheel, observing the rear corner in the mirror, and maintaining the distance between the wheel and the left dotted line. After parking, the wheels do not need to be straightened, and the turn signal must not be forgotten when exiting. The vehicle must not exceed the lines when stopped, and the tires must not touch the lane boundaries during movement. Curve driving, commonly known as the S-curve, is manageable for many students with good driving sense, indicating its relatively low difficulty. However, some students misjudge line positions during the actual test, leading to immediate failure by crossing lines. The key is observing the position of the front hood marker points relative to the edge lines. Tires must not touch the road edges. Right-angle turns are even simpler, essentially a breakdown of the exiting part of reverse parking. The method for finding points is the same as exiting: aligning the front hood's horizontal line with the front line (either precisely or slightly delayed). Ensure wheels do not touch the road edges. Highway toll card collection requires slowing down when entering the toll station. There are two methods: manual card collection, where a staff member hands the card to the driver, and self-service card collection. In manual lanes, align the front of the car properly. In self-service lanes, approach the card machine closely. Regardless of the method, shift to neutral and engage the handbrake. Typically, C1 Subject 2 requires 16 hours of training, while C2 requires 14 hours. Completing the training hours is a basic requirement for taking the Subject 2 test. Hours can only be increased, not reduced, and additional items require corresponding extra hours. Each hour is 60 minutes, with effective teaching time no less than 45 minutes. If a student fails Subject 2, they can retake it once. If they fail again, the test ends, and they must reschedule after 10 days. If they fail five consecutive test attempts (including retakes, totaling 10 attempts), all previously passed subjects are voided, and they must restart from Subject 1.
11
1
Share

How Many Axles Does a 4.2-Meter Truck Have?

4.2-meter trucks are 2-axle vehicles. Below is relevant knowledge about truck drive shafts: 1. Composition: A drive shaft consists of a shaft tube, telescopic sleeve, and universal joint. The drive shaft (DriveShaft) connects or assembles various components while being a movable or rotatable circular component, typically made of lightweight alloy steel pipes with excellent torsional resistance. 2. Quality Requirements: As a high-speed rotating body with minimal supports, dynamic balance is crucial for drive shafts. Generally, drive shafts undergo dynamic balance testing before leaving the factory and are adjusted on balancing machines.
10
5
Share

How are points deducted when motorcycle and car driving licenses are merged?

After the motorcycle license and car license are merged, points are deducted on this single merged license, which can be considered as being deducted on either the motorcycle license or the car license. The total remains 12 points, and regardless of which vehicle is involved in a violation, points are deducted from these 12 points. Here is additional information: Relevant regulations: The traffic management department of the public security authority implements a cumulative point system for motor vehicle drivers who violate road traffic safety laws and regulations, in addition to imposing administrative penalties. For drivers whose accumulated points reach the specified limit, the traffic management department will confiscate their motor vehicle driving license, provide education on road traffic safety laws and regulations, and require them to retake the test.
20
4
Share

Where to Buy Car Modification Parts?

Car modification parts can be purchased from local dealers or overseas channels. Here is some information about car modifications: 1. Modification requirements: You can modify the body color (including interior), engine, fuel type, frame number, etc. However, modifications to the body, frame, or engine can only be made if they are damaged beyond repair or have quality issues. When applying for modifications, you must provide proof from a repair shop and documentation of the origin of the replaced engine, body, or frame. 2. No chassis height modifications: Replacing the front bumper is allowed after approval, but modifications that increase chassis height to enhance off-road performance are not permitted. If any illegal modifications are found during the annual inspection, they must be restored to their original state.
1
2
Share

What is used for matching when replacing an electronic steering gear?

Replacing an electronic steering gear requires the use of a dedicated diagnostic tool to match the steering angle sensor G85. Below are the specific causes of electronic steering gear malfunctions: 1. Excessive air: The power steering system contains a large amount of air, leading to abnormal car steering. 2. Foreign objects: Presence of foreign objects in the steering hydraulic lines causes the steering pump flow control valve to stick. 3. Loose connections: Loose connections in the power steering system result in steering fluid leakage. 4. Piston cylinder wear: Excessive wear of the steering gear piston cylinder, poor sealing of oil seals, or sticking/damage of the control valve.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.