What is the vehicle positioning of the Dongfeng Fengdu MX6?

1 Answers
MacParker
07/30/25 2:52am
The Dongfeng Fengdu MX6 is positioned as a compact SUV, and it is a 5-door, 5-seat SUV under Zhengzhou Nissan. In terms of power, the Dongfeng Fengdu MX6 is equipped with a 2.0L engine paired with a CVT continuously variable transmission, delivering a maximum horsepower of 144ps and a maximum power of 106kw. Regarding body dimensions, the vehicle measures 4625mm in length, 1790mm in width, and 1735mm in height, with a wheelbase of 2630mm. Both the front and rear brake types are ventilated discs, with a front track of 1540mm and a rear track of 1545mm. The minimum ground clearance is 210mm.
Was this review help?
5
1
Share
More Forum Discussions

Will Running a Red Light Behind a Large Vehicle Generally Be Captured by Cameras?

Running a red light by following behind a large vehicle will be captured by cameras and is considered a red-light violation. According to the regulations of the Ministry of Public Security, running a red light in this manner will result in a penalty of 6 points deducted from the driver's license, so it is important to maintain a safe distance. Additionally, there is no recourse for appealing a penalty if you mistakenly run a red light while following a large vehicle. Below is an introduction to traffic signals: 1. The role of traffic signals: Traffic signals are lights that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. 2. Classification of traffic signals: Traffic signals are categorized into motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, directional indicator signals (arrow signals), lane signals, flashing warning signals, and signals at railway crossings.
7
0
Share

What is the function of the PTC button in a car?

The PTC button in a car refers to the switch for the PTC heater in a pure electric vehicle, and its function is equivalent to the heating switch in a fuel-powered car. Below are specific details about pure electric vehicles: 1. Definition: A pure electric vehicle is a vehicle that uses an onboard power source as its energy, drives the wheels with an electric motor, and meets all the requirements of road traffic and safety regulations. 2. Advantages: In urban driving conditions, pure electric vehicles accelerate faster than traditional fuel-powered cars without any delay. Therefore, the driving experience of electric vehicles is better. In terms of economy, besides electricity being cheaper than gasoline, electric vehicles are also more resource-efficient in other aspects. Additionally, the noise and vibration levels of electric motors during operation are significantly lower than those of traditional internal combustion engines. At idle and low speeds, the comfort of electric vehicles is much higher than that of traditional cars. 3. Disadvantages: Limited battery range; the charging speed of electric vehicles is slower compared to the refueling time of fuel-powered cars; due to the high cost of battery packs, the price of new electric vehicles far exceeds that of fuel-powered cars in the same class, especially when compared to small-displacement economical family cars, making pure electric vehicles unreasonably expensive.
2
1
Share

What is the minimum speed limit on highways with a maximum speed of 120 km/h?

According to Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law", highways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. More extended information is as follows: 1. Overview: Highways, abbreviated as expressways, refer to roads specifically designed for high-speed vehicle travel. Highways have different regulations in different countries, regions, eras, and academic fields. According to China's "Technical Standards for Highway Engineering", highways are multi-lane roads exclusively for vehicles traveling in separate directions and lanes, with full access control. The average annual daily design traffic volume for highways should be more than 15,000 passenger cars, with a design speed of 80 to 120 kilometers per hour. 2. Others: Countries and regions around the world have their own construction standards for highways, without a unified model; there are differences in highway systems between different countries and regions. Some countries and regions include direct trunk roads with partial access control and non-full interchange sections as part of their highway systems.
10
1
Share

Why are anti-sloshing baffles installed in tank-type hazardous chemical transport vehicles?

Tank-type hazardous chemical transport vehicles are equipped with anti-sloshing baffles primarily to reduce liquid fluctuations and impacts inside the tank, thereby improving the driving stability of the tanker. When the viscosity of the medium transported by the tanker is relatively low and the filling level is between 20% and 80%, anti-sloshing baffles must be installed inside the tank. The following introduces the details of anti-sloshing baffles: 1. Introduction to anti-sloshing baffles: The anti-sloshing baffle of a tanker, also known as a surge plate, is a crucial component in the design of liquid tank vehicles. Whether it's a fuel tanker, a water sprinkler, or a chemical liquid transport vehicle, anti-sloshing baffles are installed inside. 2. Standards: To achieve optimal anti-sloshing effects, it is generally recommended that the volume between two baffles should not exceed 7.5m³, or the spacing should not exceed 1750mm. The effective area of the anti-sloshing baffle should be greater than 40% of the tank's cross-sectional area, and the ventilation area in the upper part of the baffle should be less than 20% of the tank's cross-sectional area.
19
1
Share

What Happens If You Leave the Car AC on All Night?

Leaving the car air conditioning on all night while the engine is running can cause damage to the vehicle. Below is relevant information about automotive air conditioning systems: 1. Introduction to Automotive AC: A car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. It regulates the temperature and humidity inside the vehicle to provide a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the refrigerant's temperature and pressure increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy. The liquid refrigerant then flows through the throttle device, where its temperature and pressure decrease before entering the evaporator. In the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the cabin air passing through the evaporator and evaporates into gas. This gas is then drawn back into the compressor to begin the next cycle.
16
2
Share

Is there any impact if replacing an 80Ah car battery with a 70Ah one?

Replacing an 80Ah car battery with a 70Ah one generally has no adverse effects on vehicle performance. Below are specific classifications of car batteries (also known as storage batteries): 1. Conventional Battery: The plates of conventional batteries are composed of lead and lead oxide, with the electrolyte being an aqueous solution of sulfuric acid. Its main advantages are stable voltage and low cost; disadvantages include low specific energy (the amount of electrical energy stored per kilogram of battery), short service life, and frequent maintenance. 2. Dry-Charged Battery: Its full name is dry-charged lead-acid battery. Its main feature is that the negative plate has a high capacity for storing electricity. In a completely dry state, it can retain the stored charge for up to two years. When in use, you only need to add the electrolyte and wait for 20-30 minutes before it can be used. 3. Maintenance-Free Battery: Due to its structural advantages, maintenance-free batteries consume very little electrolyte and generally do not require the addition of distilled water during their service life. They also feature shock resistance, high-temperature resistance, compact size, and low self-discharge. Their service life is typically twice that of conventional batteries.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.