What is the vehicle inspection process when picking up a car?

1 Answers
DelStephanie
07/29/25 8:47pm
The vehicle inspection process when picking up a car includes: 1. Check the paint for scratches, spots, dents, and wear; 2. Inspect the vehicle identification plate; 3. Examine the windshield; 4. Inspect the engine; 5. Check the doors; 6. Verify the tire production date; 7. Assess the interior environment; 8. Test the basic functions of the vehicle; 9. Take the vehicle for a test drive. The registration process after picking up the car is: 1. Obtain the vehicle certificate of conformity; 2. Keep the triplicate purchase invoice safe; 3. Pay the vehicle purchase tax and receive the tax certificate; 4. Register and inspect the vehicle at the DMV; 5. Choose a license plate number; 6. After payment, receive and install the license plate.
Was this review help?
5
4
Share
More Forum Discussions

What Does Sport Mode Mean?

Sport mode is a driving mode in automatic transmission vehicles. In sport mode, the gear shift RPM is increased, resulting in slower gear shifts and thus faster acceleration for the vehicle. Below is some related information about automatic transmissions: 1. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, the more gears there are, the more fuel-efficient the vehicle will be. 2. Driving Tips: For manual transmission vehicles, higher RPMs should be used when shifting gears. Engines are designed to operate at higher RPMs, with various components' dynamic balance and rotational inertia parameters optimized for high-speed conditions. If the engine operates for extended periods outside its normal working range, internal components experience increased load and wear, leading to frequent vibrations and knocking, which can also affect the engine's lifespan.
9
2
Share

Is There a Problem with Leaving the Car Hood Open in the Rain?

Leaving the car hood open in the rain can have negative effects on the vehicle. When it rains, with the hood open, water can enter the air filter through the gaps between the hood and headlights. If the drainage valve's function is compromised, rainwater may enter the engine through the intake pipe, causing the engine to fail to start. For minor cases, you can remove the distributor cap, dry it with a tissue, and reinstall it. For severe water ingress, professional repair is needed. Here are additional steps to handle a car engine stalling due to water ingress: 1. Open the engine hood and disconnect the cylinder wires. 2. Remove the spark plugs and then start the engine. Water in the engine cylinders will be expelled through the spark plug holes. 3. Hold the key in the start position for 5 seconds, then release. Wait 10 seconds and start the engine again for 5 seconds. Repeat this process three times to effectively remove all water from the engine.
3
1
Share

Where is the Vehicle and Vessel Tax Certificate?

"Compulsory Traffic Insurance Policy" is the "Vehicle and Vessel Tax Certificate". Vehicle and Vessel Tax Knowledge: 1. Relationship between Compulsory Traffic Insurance and Vehicle and Vessel Tax: Since the vehicle and vessel tax paid when purchasing a car is basically bundled with compulsory traffic insurance, when purchasing compulsory traffic insurance, the vehicle and vessel tax must also be paid in full at the same time, and the invoice will also be issued on the same document. 2. Location: Generally, in the vehicle and vessel tax collection item in the lower right corner of the compulsory traffic insurance policy, the paid vehicle and vessel tax amount will be listed separately, and this tax is recognized as valid. 3. Definition: Vehicle and vessel tax is a type of property tax levied on vehicles and vessels that are required by law to be registered with public security, transportation, agriculture, fisheries, military and other management departments within China, calculated based on the type and according to the prescribed tax basis and annual tax standards.
10
5
Share

What are the new regulations for the load capacity of five-axle vehicles in 2020?

The overload and over-limit identification standard sets the total mass limit for two-axle vehicles at 18 tons. Below are relevant introductions about load capacity: 1. Standard load capacity: The general load capacity of household cars is 375 to 500 kg. It cannot be calculated in detail and must be based on the load capacity marked on the nameplate attached when the car leaves the factory. The national standard is 375 kg, meaning the load capacity of manufactured cars cannot exceed 375 kg. 2. Load conditions: There are two types of vehicle load standards: One is the vehicle load standard based on traffic and road administration, where two-axle vehicles should not exceed 20 tons, four-axle vehicles (front four, rear four) 24 tons, and eight-axle vehicles (front four, rear eight) 34 tons. The other is the vehicle load standard in the eyes of traffic police, which is based on the driving license, i.e., the tonnage specified on the factory certificate.
19
5
Share

What are the driving techniques for manual transmission in traffic jams?

Here is a detailed introduction to the driving techniques for manual transmission in traffic jams: 1. Starting on flat ground: When starting on flat ground, the vehicle will not roll back, so there is no need to use the brake-start method. Simply release the clutch to the half-engagement point. 2. Brake-start method: The brake-start method involves starting the engine while pressing the foot brake or using the handbrake. Release the brake when the vehicle shows signs of moving forward to complete the starting operation. 3. Acceleration and gear shifting during starting: Whether starting on flat ground or using the brake-start method, once the vehicle starts moving forward, gently press the accelerator. As the speed increases, gently release the clutch. You can press the accelerator while releasing the clutch. 4. Double-clutch technique for downshifting with a throttle blip: Press the clutch pedal and shift out of gear; release the clutch pedal and give a throttle blip (the amount of throttle depends on the speed change before and after shifting); press the clutch pedal again and engage the new lower gear.
16
2
Share

How Long Does It Take to Drive 100 Kilometers on the Highway?

It takes about an hour to drive 100 kilometers on the highway. Below are the regulations for driving on the highway: 1. Highway following distance regulations: When a motor vehicle is driving on the highway at a speed exceeding 100 km/h, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 km/h, the distance from the vehicle in front can be appropriately reduced, but the minimum distance should not be less than 50 meters. 2. Highway speed limit regulations: The minimum speed for normal driving of motor vehicles on the highway should not be less than 60 km/h. For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h; for roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.