What is the vehicle blacklist?

What is the correct sequence for jump-starting a car battery?

Detailed instructions for jump-starting a car battery: Perform with engines off: Jump-starting requires a donor vehicle with a functional battery. Park both vehicles front-to-front. Note that all battery operations must be performed with both vehicles' engines turned off. Open the engine hoods to expose both batteries' positive and negative terminals. Connection sequence: Take one jumper cable and connect one end to the dead battery's positive terminal, and the other end to the donor battery's positive terminal. Important: Never let the positive and negative terminals touch, as this may cause dangerous short-circuiting. Then take another jumper cable, connect one end to the donor battery's negative terminal, and the other end to either the dead battery's negative terminal or the vehicle chassis. Disconnection sequence: After cables are properly connected, start the donor vehicle to provide ignition voltage to the dead battery. When disconnecting, first remove the positive cable from the donor vehicle, then the positive from the recipient vehicle, followed by the negative cable from the donor vehicle, and finally the negative cable from the recipient vehicle.

9

5

Share

How to Replace the Key Battery for a Magotan?

The method to replace the key battery for a Magotan is: 1. After removing the spare mechanical key, use your thumb to push firmly towards the hidden key side to slide off the silver decorative cover; 2. Pry open the rear cover of the key and remove the old battery; 3. Install the new battery and reassemble following the original steps. Taking the 2020 Comfort Magotan as an example, its body dimensions are: 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm and a fuel tank capacity of 66 liters. The 2020 Comfort Magotan features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

7

0

Share

Which series does the Lynk & Co belong to?

Lynk & Co is a classic brand series under Beijing Hyundai's Elantra, with models including: Lynk & Co 01, Lynk & Co 01 PHEV, Lynk & Co 02, Lynk & Co 02 20TD, Lynk & Co 03, etc. Taking the 2020 Lynk & Co 01 as an example, it is a compact SUV with body dimensions of: length 4512mm, width 1857mm, height 1689mm, wheelbase 2734mm, and curb weight 1736kg. The 2020 Lynk & Co 01 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 143PS, maximum power of 105kW, maximum torque of 215Nm, paired with a 7-speed dual-clutch transmission.

5

2

Share

How to Cancel the Tire Pressure Warning on the Lavida?

The methods to cancel the tire pressure warning on the Lavida are: 1. Directly visit an after-sales service shop to have the maintenance personnel diagnose the fault code on the car's computer and eliminate the error code; 2. Press and hold the tire pressure monitoring button located on the right side in front of the gear lever for about three seconds to cancel the tire pressure warning. Taking the 2019 Lavida as an example, it belongs to the compact car category, with body dimensions of: length 4613mm, width 1765mm, height 1460mm, and a wheelbase of 2610mm, with a curb weight of 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, and is paired with a 5-speed manual transmission.

6

0

Share

What to Do If You Fail Subject 2 Five Times?

Subject 2 Fail Five Times Solution: If you fail Subject 2 five times, you need to start over from Subject 1 and pay the fees again. The test content of Subject 2 includes: reversing into the garage from both sides, parallel parking, curve driving, right-angle turning, and stopping and starting on a slope. The reasons for failing Subject 2 include: 1. Failing to reverse into the garage or pressing the edge line when entering the garage; 2. Poor control of the clutch pedal, resulting in excessive driving speed; 3. Inaccurate stopping on the slope; 4. Stalling the car due to operational errors when starting; 5. Unfamiliarity with the test site and nervousness; 6. Forgetting the reference points during curve driving, leading to pressing the line.

14

3

Share

How to Turn on the Rear Wiper of Haval H6?

To turn on the rear wiper of the Haval H6, locate the rear wiper switch on the automatic gear lever and lift it upwards to activate. Taking the 2021 Haval H6 as an example, it is a compact SUV with the following dimensions: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The 2021 Haval H6 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine that delivers a maximum horsepower of 211PS, a maximum torque of 325Nm, and a maximum power output of 155kW, paired with a 7-speed dual-clutch transmission.

2

0

Share

What is the vehicle blacklist?

What is the correct sequence for jump-starting a car battery?

How to Replace the Key Battery for a Magotan?

Which series does the Lynk & Co belong to?

How to Cancel the Tire Pressure Warning on the Lavida?

What to Do If You Fail Subject 2 Five Times?

How to Turn on the Rear Wiper of Haval H6?

What to Do If You Lose Your Car Keys?

When is the best time to add fuel additive?

Is it necessary to install a dash cam in a car?

What Causes Resonance in Buick Envision Vehicles?