What is the validity period of a driver's license when first obtained?

2 Answers
Phillips
07/24/25 8:58pm
Generally, a driver's license is valid for 6 years when first issued. Below is relevant information about driver's licenses: 1. Vision requirements for a driver's license: Current driving test regulations have gradually relaxed the conditions for disabled individuals to drive. For example, individuals with monocular blindness can now apply for a driver's license. According to the regulations, if one eye has a vision impairment, the other eye must have a naked or corrected visual acuity of at least 5.0, and the horizontal field of vision must reach 150 degrees. Under these conditions, one can apply for a driver's license for small cars, small automatic transmission vehicles, low-speed trucks, three-wheeled vehicles, or special small automatic transmission passenger vehicles for disabled individuals. 2. Color blindness disqualifies applicants: It's important to note that since monocular color blindness is rare and most cases involve binocular color blindness, individuals with color blindness are not eligible to take the driving test.
Was this review help?
12
0
Share
McGrace
08/10/25 2:28pm
When I first got my driver's license, I was quite confused about its validity period, especially since it was my first time holding one and the novelty was strong. Standardly, the initial validity period for a driver's license is 6 years, which is a reasonably designed timeframe because new drivers need to adapt to road conditions and gain experience. During these six years, if you maintain a good driving record with no major accidents or frequent point deductions, you can renew your license at the DMV 90 days before it expires, potentially extending it to 10 years. I've seen many friends procrastinate on renewal and end up in a last-minute rush; others who maxed out their 12 points even lost their eligibility for renewal. Developing good habits, like regularly checking your license's expiration date and setting phone reminders, can help avoid the risk of driving without a valid license and give you peace of mind. Overall, this six-year transition period is an opportunity for everyone to prove themselves—don't overlook it.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Does a B2 driver's license require annual review if no points are deducted?

According to the new regulations of the Ministry of Public Security, drivers with large truck driver's licenses (B2 driver's license) do not need an annual review if no points are deducted. The following is the process of annual review: 1. After submitting the inspection application, the vehicle must first undergo an online inspection. The vehicle is driven into the automatic inspection area to test exhaust, speed, lights, chassis, etc., to ensure compliance with standards. All items must pass to proceed. 2. Exterior inspection involves verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy; checking the body exterior: inspecting details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation, and interior and wheels of passenger vehicles. 3. The owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label; if any items fail, the owner must repair them and undergo re-inspection until they pass before proceeding with the visa procedures.
14
2
Share

What does car rpm mean?

Car rpm stands for the maximum rotational speed. Here is an introduction about the maximum rotational speed: 1. Each engine has a defined maximum rotational speed, which varies depending on the engine's structure. Increasing the rotational speed can enhance power output. The maximum rated rotational speed an engine can achieve usually corresponds to the maximum power output. In technical specifications, the power value of an engine typically refers to the maximum power it can achieve at its highest rotational speed. The maximum rated rotational speed is often easily reached when driving downhill in lower gears. 2. The maximum rated rotational speed is related to the engine's displacement, but generally, engine rotational speeds have been continuously increasing. Currently, the average rotational speed for a four-stroke engine at idle is between 600~800 rpm. As for the engine rotational speed at maximum power, depending on the engine's internal structure, displacement, and the number of cylinders, it usually ranges between 5000~6500 rpm. Racing cars can achieve an astonishing maximum rated rotational speed of 12000 rpm or even higher.
19
1
Share

How to Add a Driving License Category?

To apply for an additional driving license category, you must meet the corresponding conditions and submit an application to the vehicle management office. After passing all the required tests, you will obtain the additional driving qualification. Below is the relevant introduction about driving licenses: 1. Laws and Regulations: According to Article 40 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," first-time applicants for a motor vehicle driving license or those applying to add a permitted driving category must schedule the second subject test. 2. Application Conditions: To apply for an additional category, if your original permitted categories are C1, C2, C3, or C4, you must have at least 3 years of driving experience and no full penalty points in the last 2 scoring cycles to upgrade to a B1 license. For those with B1 or B2 categories, you need at least 3 years of driving experience and no full penalty points in the last 2 scoring cycles to upgrade to an A2 license. To upgrade to an A2 license from an A1 license, you must have at least 1 year of driving experience and no full penalty points in the last scoring cycle.
16
1
Share

Is it necessary to change the transmission fluid for manual transmissions?

Manual transmissions require transmission fluid changes. The hazards of not changing the transmission fluid are as follows: 1. Starting: The car may experience weak acceleration when starting cold. 2. Heat dissipation: The transmission fluid may thicken, potentially blocking the transmission cooler, leading to excessively high transmission fluid temperatures and increased wear. 3. Aging: The transmission fluid may degrade, not only increasing fuel consumption but also shortening the transmission's lifespan. 4. Blockage: Particles may form in the transmission fluid, clogging the fluid passages and damaging the valve body, directly affecting system pressure and power transmission, resulting in delayed responses and harsh shifting.
6
2
Share

Do I Need to Add Cleaner When Using Ethanol Gasoline?

Switching to ethanol gasoline does not require adding a cleaning agent. Here is some relevant information about ethanol gasoline: 1. Performance of Ethanol Gasoline: As a new generation of clean and environmentally friendly fuel, ethanol gasoline itself is an excellent organic solvent with strong dissolving effects. After adding ethanol gasoline, impurities, dirt, and sediments at the bottom of the fuel tank and in the fuel lines will automatically soften and dissolve into the gasoline. 2. Cleaning the Fuel Lines: If no issues occur after switching to ethanol gasoline, there is no need to clean the fuel lines even after driving 30,000 kilometers. However, for cars that have been idle for over a year without use, it is recommended to clean the fuel lines, as gasoline that hasn't flowed for a year will have relatively more deposits.
7
2
Share

How to Check Motorcycle Fuel Level?

Check the motorcycle's fuel gauge. 'F' indicates a full tank, while 'E' in the red zone indicates low fuel. When the fuel gauge needle points to the red zone near 'E', there is still approximately one-third to one-fourth of the total fuel capacity remaining in the tank, at which point the rider should refuel. For cross-type motorcycles, you can also rely on the fuel tank switch. After filling up, set the switch to the main tank. When the main tank runs out of fuel, switch to the reserve tank, and after refueling, switch back to the main tank. The fuel gauge is used to indicate the amount of fuel remaining in the vehicle's fuel tank. It can be either a pointer or a digital display. The fuel gauge consists of a stabilized fuel level indicator and a fuel level sensor. Refueling precautions: Do not wait until the warning light comes on to refuel. Since the fuel pump is located inside the tank and relies on fuel for cooling and lubrication, insufficient fuel can impair the pump's normal operation and reduce its lifespan. It is also not advisable to fill the tank completely. Gasoline expands when heated and evaporates into vapor, especially in high summer temperatures, requiring space to accommodate this. If the tank is filled to the brim with no space left, gasoline vapor or even liquid fuel may enter the carbon canister for storage. Once the canister is full, the excess will escape into the air, leading to waste and environmental pollution.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.