What is the usage scope of temporary license plates from Beijing to Hebei?

2 Answers
Harry
09/01/25 3:41am
The usage scope of temporary license plates from Beijing to Hebei varies depending on the color of the plate. Temporary plates are distinguished by color: "light blue background with black characters and black borders" is only for motor vehicles driving within the city, while "brown-yellow background with black characters and black borders" is for motor vehicles driving across cities. Below is an introduction to attaching temporary license plates: 1. Attachment positions: New cars should have two temporary license plates attached simultaneously: one should be placed in the lower left or right corner of the front windshield inside the car, in a position that does not obstruct the driver's view, and the other should be placed in the lower left corner of the rear windshield inside the car. 2. Consequences of incorrect attachment: Incorrectly attaching temporary plates will result in a full 12-point deduction. Since they are transitional temporary plates, their validity period does not exceed 30 days. 3. Temporary plate renewal: Due to unforeseen circumstances, some may not complete the vehicle registration and licensing procedures within the temporary plate's validity period. In such cases, the owner needs to apply for a temporary plate renewal in advance to avoid penalties for driving with an expired temporary plate. A new car can apply for temporary plates up to three times.
Was this review help?
1
0
Share
DiAdriana
09/13/25 6:32am
I just drove from Beijing to Hebei using a temporary license plate, and it was quite an experience. There are two types of temporary plates: local temporary plates and inter-provincial temporary plates. Local temporary plates can only be used within Beijing. If you want to travel or run errands from Beijing to Hebei like I did, you must apply for an inter-provincial temporary plate, as it covers the entire country, including all areas of Hebei. At the time, I had just bought a new car and applied for the inter-provincial temporary plate at the Beijing Vehicle Management Office. It took less than an hour and the cost was low, but you must use it within the validity period, which is usually 7 or 30 days. Driving with an expired plate is a violation, and the police will issue a fine. While driving in Hebei, I made sure the plate was clearly displayed on the front and rear windshields, otherwise, you could easily be pulled over for inspection. Also, make sure to have valid insurance during the temporary plate period to avoid being unprotected in case of an accident. In short, if you plan to drive from Beijing to Hebei, prioritize getting an inter-provincial temporary plate for peace of mind and safety.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Envision S?

The Envision S has a fuel consumption of 9.5 liters per 100 kilometers. The Envision S is a mid-size SUV under the Buick brand, equipped with a 2.0-liter turbocharged engine. The engine code for the Envision S's 2.0-liter turbocharged engine is LSY. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests as specified by national standards for certain types of vehicles. 2. Testing Methods: Tests can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then calculated using the "flow meter method" or the "carbon balance method."
9
5
Share

What was the emission standard for cars in 2008?

In 2008, cars had either China II, China III, or China IV emission standards. Below is relevant information about emission standards: 1. Principle: Vehicle emissions refer to harmful gases such as CO, HC+NOx, and PM discharged from exhaust. These are harmful gases produced during the engine's combustion process. For example, CO is an intermediate product of incomplete fuel oxidation and is generated when oxygen is insufficient. High mixture concentration and uneven mixture can increase CO emissions. 2. Countermeasures: Vehicle emission standards are established to control pollutant emissions from cars. To curb the production of these harmful gases, automakers are encouraged to improve their products to reduce the source of these emissions, leading to the formulation of relevant vehicle emission standards.
20
0
Share

How to File an Insurance Claim for a Damaged Rearview Mirror?

If your rearview mirror has been damaged, you can park your car safely and call your insurance company to file a claim, explaining the situation. Here are some considerations when purchasing car insurance: 1. Carefully check the insurance policy: After purchasing car insurance, thoroughly inspect the policy upon receipt. In addition to verifying the information, pay attention to identifying its authenticity. Generally, policies have anti-counterfeiting patterns, relevant wording supervised by the insurance regulatory authority, and annotations of the sales location. 2. Carefully review and verify the insurance documents: When receiving the insurance documents, make sure to carefully check them. Verify whether the third copy of the document is printed on white carbonless paper with a light brown anti-counterfeiting pattern.
7
3
Share

How to Use Hazard Lights in a Car?

When the water level reaches above 20 centimeters, there is a risk of water entering the engine. For ordinary sedans, when the water level exceeds 20 centimeters (for SUVs with higher ground clearance, this threshold increases to 30 centimeters), the risk of engine water ingress arises. Water can enter the engine through two main pathways: 1. Low air intake inlet: Due to the low position of the engine's air intake inlet, water can be sucked into the engine when driving through flooded areas. 2. Exhaust outlet below the waterline: If the exhaust pipe outlet is submerged below the waterline, water can be drawn into the engine through the exhaust. Here is relevant information: 1. Engine stalling is inevitable after water ingress: Since water entering the cylinders lacks lubrication, attempting to restart the engine blindly after stalling may cause severe damage (e.g., cylinder scoring), potentially leading to engine failure. The correct approach is to push the car to a higher, non-flooded area, contact your insurance company, and have the vehicle towed to a repair shop for inspection. 2. Check all fluid systems in the vehicle: After water exposure, fluids may foam or become contaminated, losing their lubricating properties. Additionally, water may carry sand particles, accelerating engine wear. Therefore, prompt cleaning and fluid replacement are necessary. After inspection, thoroughly clean electrical connectors in the engine compartment to prevent corrosion and sand residue. Key areas to clean include the fuse box, sensor connectors, and areas where water may accumulate in the body. Once these components are cleaned, conduct a road test at moderate speeds while carefully listening for abnormal engine noises. If unusual sounds are detected, inspect engine bearings and rotating components again to prevent damage from excessive wear.
13
3
Share

What is the speed limit mnemonic for urban roads and highways?

Urban roads and highways speed limit mnemonic mainly includes: 1. Roads without centerlines: urban roads at 30 km/h, highways at 40 km/h. 2. Roads with only one motor lane in the same direction: urban roads at 50 km/h, highways at 70 km/h. 3. Expressway roads: the right lane of 2-lane roads is 60~100 km/h with a minimum of 60 km/h, the left lane has a minimum of 100 km/h; for 3-lane roads, the far right lane is 60~90 km/h, the middle lane is 90~110 km/h, and the far left lane has a minimum of 110 km/h.
8
0
Share

P2106 Trouble Code Solution?

P2106 trouble causes include TACM circuit or connector failure, electronic control module (PCM or ECM) failure, so OBD detection and solution are required. Here are the specific details about P2106 trouble code: 1. Meaning: P2106 trouble code, applicable to all car manufacturers, means Throttle Actuator Control System. 2. Introduction: The throttle actuator is a stepper motor responsible for controlling throttle opening according to instructions from the throttle control module. If the electronic control module detects that the Throttle Actuator Control Motor (TACM) system is in forced limited power mode during Failure Mode Effects Management (FMEM) mode operation, this trouble code will appear. Fault causes include TACM circuit or connector failure, electronic control module (PCM or ECM) failure, etc. 3. Fault Clearing: After troubleshooting, the trouble code needs to be cleared. When clearing trouble codes, it must be done according to the specified clearing method for the corresponding vehicle model. Never directly disconnect the negative battery cable just to clear the trouble code. Otherwise, it may cause some vehicle models' control center computers to lose normal records.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.