What is the usage of the Envision's gear positions?

1 Answers
OliveLynn
07/29/25 10:00am
The usage of the Envision's gear positions is: P gear is the parking position, D gear is the automatic forward gear, N gear cuts off the engine power and can be used when parking or towing, R gear is the reverse gear used when reversing, and L gear is the high-torque position suitable for low-speed climbing. Taking the 2020 Envision as an example, it belongs to the midsize SUV category with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, and a fuel tank capacity of 66L. The 2020 Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 250Nm.
Was this review help?
6
5
Share
More Forum Discussions

What is the reason for frequent scratches on the window glass when rolling up and down?

The reason for frequent scratches on the window glass when rolling up and down is: there is sand and dirt inside the window rubber seal, which causes friction when the glass moves. The solution is to replace the rubber seal or clean it. The maintenance methods for window glass are: 1. Use a soft cloth when cleaning the car; 2. Use more glass cleaner to wash the glass. The window is an important part of the entire car body, serving to meet the needs of interior lighting, ventilation, and visibility for the driver and passengers. Depending on the installation position, the glass is divided into: front and rear windshields, side windows, and door windows. The window structure is usually a curved and sealed type, with rubber sealing strips connecting the window frame and the glass on the car body.
13
5
Share

What are the reasons for the engine stalling and failing to start when hot?

The reasons for the engine stalling and failing to start when hot are: 1. Fuel injector leakage; 2. Damaged carbon canister solenoid valve; 3. Poor fuel quality; 4. Faulty intake air temperature sensor; 5. Engine carbon deposits; 6. Poor fuel quality; 7. Insufficient fuel supply pressure from the fuel pump; 8. Damaged crankshaft position sensor; 9. Faulty engine main relay. The solutions for the engine stalling and failing to start when hot include: 1. Replace the engine oil; 2. Adjust the resistance value of the crankshaft position sensor at a repair shop; 3. Replace the spark plugs or adjust the ignition voltage; 4. Reset the throttle data and adjust the central control at a repair shop.
13
4
Share

What engine does the Lynk & Co 05 use?

Lynk & Co 05 uses a Volvo engine. The Lynk & Co 05 is a compact SUV under the Lynk & Co brand. Taking the Lynk & Co 05 2020 model two-wheel drive Yao as an example, its body dimensions are: length 4592 mm, width 1879 mm, height 1628 mm, wheelbase 2734 mm, and curb weight 1738 kg. The Lynk & Co 05 2020 model two-wheel drive Yao is equipped with a 2.0T turbocharged inline 4-cylinder engine, with a maximum power of 187 kW, maximum power speed of 5500 rpm, maximum torque of 350 Nm, and maximum torque speed ranging from 1800 to 4800 rpm.
13
3
Share

Will the fan run if the water temperature sensor is broken?

If the water temperature sensor is broken, the fan will not run. The symptoms of a broken water temperature sensor include: 1. The water temperature gauge needle does not move; 2. Difficulty starting a cold engine; 3. The ECU cannot receive the signal for a rich air-fuel mixture; 4. Only a lean air-fuel mixture can be provided to the engine; 5. Unstable idle and difficulty accelerating. The water temperature sensor consists of a thermostat part and a water level control part, and it is accompanied by a pressure reducing device before the electric valve and a rotary muffler heater for heating. The functions of the water temperature sensor are: 1. Increasing the fuel injection volume at low temperatures; 2. Increasing the ignition advance angle at low temperatures; 3. The ECU controls the idle control valve based on the water temperature sensor signal at low temperatures to increase the idle speed; 4. Delaying ignition at high temperatures to prevent knocking.
20
3
Share

How to Install the Wipers on a Malibu?

The installation steps for the Malibu wipers are: 1. Remove the old wipers from the vehicle; 2. Lift the wiper arm; 3. Pull the wiper downward to detach it from the arm; 4. Install the new wiper. The Malibu is a mid-size sedan with the following dimensions: length 4855 mm, width 1854 mm, height 1476 mm, wheelbase 2737 mm, ground clearance 118 mm, fuel tank capacity 61 liters, and trunk capacity 544 liters. The Malibu is equipped with a 1.5T turbocharged engine featuring an aluminum cylinder head, delivering a maximum power of 124 kW, paired with a 9-speed automatic transmission.
17
4
Share

Does the Corolla meet China 6 emission standards?

The Corolla meets China 6 emission standards and is a compact car under the Toyota brand. The Corolla features a 4-door, 5-seater sedan body structure with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, a ground clearance of 152mm, and a fuel tank capacity of 50 liters. It is equipped with a 1.2L inline 4-cylinder turbocharged engine, delivering a maximum power of 85 kW at 5200-5600 rpm and a maximum torque of 185 Nm at 1500-4000 rpm.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.