What is the usage method of car window lubricant?

1 Answers
StBrianna
07/30/25 1:08am
The usage method of car window lubricant is: 1. Clean the window rubber thoroughly. If there is severe dirt, it is necessary to first clean it with detergent using a small brush; 2. Lower the window and take out the window lubricant, shake it evenly before use, and insert the nozzle into the spray hole; 3. Insert the nozzle into the window rubber groove and spray evenly up and down, then wipe off any excess lubricant with a towel. The lubricant not only lubricates the window to prevent the aging of the window seal but also solves window noise. It also has a good lubricating effect when sprayed on door hinges, engine cover hinges, electric rearview mirrors, wiper joints, or rusty and noisy home door locks and door/window screws.
Was this review help?
1
3
Share
More Forum Discussions

Must the Damage Assessment List and Repair List Be Provided to the Vehicle Owner?

Damage assessment lists and repair lists need to be shown to the vehicle owner. Below is an introduction to the relevant content: 1. Damage Assessment List: The damage assessment list refers to the repair and claim documents issued after a vehicle accident is reported to the insurance company. 2. Third-Party Damage Assessment: When disputes arise over the damage assessment and compensation amount, a third-party institution is required to conduct the assessment. If the vehicle owner does not review the damage assessment list, a unified agreement cannot be reached. Below is additional information on the relevant content: 1. Replacement Parts: The vehicle owner can use the details on the damage assessment list to clarify the extent of the vehicle's damage and the parts that need replacement. 2. Damage Assessment List: After repairs, the damage assessment list can also be used to determine which parts need replacement and which require repair.
8
0
Share

What engine does the Huansu S7 use?

The Huansu S7 is equipped with a 1.5T turbocharged engine. This engine has a maximum power of 110kW and a maximum torque of 220Nm. In terms of the transmission system, it is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. The Huansu S7 is a mid-size SUV launched by BAIC Huansu. The Huansu S7 features a distinctive dot-matrix 'starry sky' X-shaped front grille, a simple yet stylish design with a square-shaped full LED automatic headlight, showcasing a rugged SUV style. With a body length of 4.8 meters and muscular body lines, the black lower guard plate and silver protective plate at the rear create an off-road atmosphere.
16
4
Share

What class of car is the Audi A6L?

Audi A6L is a C-class car, with a wheelbase of 3012 mm. The main criterion for determining the class of a sedan is its wheelbase. C-class cars, also known as mid-to-large-sized cars, generally have a wheelbase of around 3.0 to 3.1 meters and an engine displacement typically ranging from 2.4 to 3.2 liters. Typical representatives include the Audi A6L, BMW 5 Series, Mercedes-Benz E-Class, Hongqi H7, and Toyota Crown, as well as some imported models. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the German new A6, with dimensions of 5015 mm in length, 1874 mm in width, and 1455 mm in height.
19
2
Share

What are the reasons for the Lavida not starting?

The reasons for the Lavida not starting are: 1. The car's gear position is incorrect, causing it not to start. The correct gear positions for starting are P or N; 2. Steering wheel lock is a rare situation where the steering wheel is locked when parking and turning off the engine, making it impossible to start again. If the steering wheel is not straightened, the key cannot be turned, and the car will not start. The Lavida has a length of 4670mm, a width of 1806mm, a height of 1474mm, a wheelbase of 2688mm, and is equipped with a 1.5L naturally aspirated 4-cylinder EA211DMB engine. The body structure is a sedan.
1
0
Share

What are the precautions for maintaining new energy vehicles?

Precautions for maintaining new energy vehicles are: Before maintenance, it is necessary to turn off the high-voltage switch. During the operation, if the maintenance involves the power system, the power supply must be cut off to prevent electric shock. During operation, insulated gloves, insulated shoes, and insulated tools must be used in accordance with the specified procedures and processes. During vehicle maintenance, the safety operation procedures for electrical circuits must be strictly followed. Precautions for using new energy vehicles: 1. Avoid high-current discharge; 2. Do not store the vehicle with insufficient charge; 3. Master the correct charging time; 4. Regularly check tire pressure; 5. Avoid exposure to direct sunlight.
20
2
Share

What do Maximum Power and Maximum Torque Mean in Cars?

Here are the explanations for maximum power and maximum torque in cars: 1. Maximum Power: Maximum power refers to the maximum rate of energy change per unit time on a circuit element, which is a physical quantity with magnitude and sign. Here, it specifically refers to the maximum output power. The greater the maximum power, the more devices the power source can support. 2. Maximum Torque: Maximum torque generally occurs in the medium to low engine speed range and tends to decrease as the speed increases. The unit of torque is Newton-meters or kilogram-meters. Torque affects the vehicle's acceleration force, including the initial start. Theoretically, the greater the torque, the faster the vehicle accelerates from a standstill, and the shorter the time from 0 to top speed. If a car has high horsepower but low torque, acceleration will be very slow, making the driver feel the car lacks power.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.