What is the urban fuel consumption of the older ES350 model?

Can Temporary License Plates Be Captured for Traffic Violations?

Generally, temporary license plates for new vehicles do not contain embedded electronic chips, so they are usually not captured by electronic traffic violation monitoring systems, mainly because the photos are too blurry. Below is relevant information about temporary license plates: 1. Placement: Temporary license plates are issued by the vehicle management office of the public security bureau before the vehicle is officially registered. For new vehicles, temporary license plates can be placed in the lower right corner of the front windshield and the lower left corner of the rear windshield, as long as they do not obstruct the view. They should not be used for more than 15 days, and the owner should promptly apply for official license plates at the vehicle management office. 2. Penalties for temporary license plates: (1) Failure to hang the temporary license plate as required will result in a 12-point deduction. (2) Covering or obscuring the temporary license plate will be penalized the same as covering an official license plate, resulting in a fine and a 12-point deduction. (3) Using an expired temporary license plate will generally result in a fine and a 12-point deduction.

15

1

Share

What Does the Skoda Logo Mean?

Skoda logo meaning: The large circle symbolizes Skoda's impeccable products worldwide; the bird's wing represents the global distribution of technologically advanced products; the arrow flying to the right signifies advanced craftsmanship; the vermilion black color in the outer ring reflects Skoda's century-old tradition; the central green color expresses Skoda's commitment to resource recycling and environmental protection. Here are additional details: 1. Company background: Skoda (SKODA), one of the classic brands under Volkswagen AG, is headquartered in Mlada Boleslav, Czech Republic, and is one of the four oldest car manufacturers in the world. The brand was established in 1895. 2. Development in the Chinese market: In 2006, the Skoda Octavia began production at Shanghai Volkswagen, becoming the third Volkswagen Group brand to be produced in China after Volkswagen and Audi, and was launched at the Beijing International Auto Show that same year. The Skoda Rapid was also officially launched in China on April 18, 2013.

19

4

Share

What items are replaced during the first maintenance of a new car?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil, oil filter, and cleaning the air filter; checking whether the levels of various fluids are normal, inspecting the generator belt and wiper blades for any damage; checking whether the tire pressure is normal, and if there is any uneven tire wear, bulging, or damage; inspecting the chassis, including the brake pads, brake discs, connecting rods, ball joints, CV joints, and any scratches, etc.; checking all the switches in the car; and ensuring the lights are functioning properly. Estimated time: Completing all tasks takes about 2 hours. Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; and the vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's first maintenance. Note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial maintenance after the new car has been driven. The specific time varies by car, usually after driving 1,000 to 3,000 kilometers. The car must undergo the first maintenance in a timely manner and should not be done too early or delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the car. The first maintenance time is calculated based on the date of vehicle pickup. There are two indicators for the first maintenance time: mileage and time. Whichever comes first is the standard. The following inspections and replacements must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters—oil filter, fuel filter, and air filter; checking whether the car's coolant level is normal; inspecting the car's brake and clutch fluid levels; checking whether the power steering fluid level is normal and if there are any leaks at the fluid pipe connections; inspecting the generator, air conditioning, water pump, and belts for aging and tension; checking tire pressure and wear condition, inflating the tires, or performing tire rotation if there is wear. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User Maintenance Manual," as different car models require different oil grades. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the cabin floor. If water enters, it will not dry naturally but will flow through the holes to areas like the gearbox, causing corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it is recommended to drain the antifreeze and refill it with the same brand from the beginning. Since antifreeze brands differ, their chemical properties vary greatly. Different types of corrosion inhibitors can corrode each other. Different brands of antifreeze use different corrosion inhibitors, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When the bolts on a car rust, some people oil them to make them work smoothly again. However, lubricating the bolts and nuts on the wheels can pose safety risks. When the car is driven at high speeds, the bolts and nuts may loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

5

1

Share

What does the EPC warning light in a car mean?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains illuminated after the vehicle starts or under other conditions, the common causes include faults in the engine intake system, throttle body issues, fuel system problems, engine malfunctions, ECU control unit failures, or brake light defects. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: This includes situations like substandard fuel, fuel degradation, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with components like the intake valves can also cause the EPC light to illuminate. ECU control unit fault: Examples include interference with the engine control unit signals or false alarms from the ECU. Brake light fault: This covers cases where the brake lights fail to illuminate, brake switch malfunctions, or brake circuit issues. Solutions for when the EPC light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash ECU-related data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains illuminated. If it does not, there may be no issue, and the EPC light might have been affected temporarily. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined measures to address the powertrain issues. Common EPC indicator lights are typically displayed in two colors: yellow and red. If the EPC warning light is yellow and the car can still operate normally, drive cautiously to a repair facility for inspection. If the EPC light is red, it indicates a more severe issue. The driver should pull over immediately and contact a professional for repairs, as continued driving could damage core components or compromise safety.

11

5

Share

What type of oil does the Nissan Sylphy use?

Nissan Sylphy uses 5w30 oil. 5w30 represents the viscosity specification of the oil grade. The number before the 'w' indicates the cold start performance—the smaller the number, the better the oil's low-temperature fluidity. 'w' means it can be used in winter, and the number after 'w' represents the oil's kinematic viscosity—the higher the number, the higher the viscosity. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of 4631mm in length, 1760mm in width, 1503mm in height, a wheelbase of 2700mm, a minimum ground clearance of 166mm, and a curb weight of 1188kg.

9

0

Share

What is the principle of continuously variable transmission?

The principle of continuously variable transmission is to use a hydraulic torque converter to generate different levels of torque, transmitting force to achieve stepless speed variation. Types of continuously variable transmission: 1. Mechanical type: There are various forms, with the most common being the cone-block metal V-belt drive, used in automobiles; 2. Hydraulic transmission type: Used in engineering vehicles and agricultural machinery; 3. Electric type: Used in electric vehicles. Starting devices for continuously variable transmission include: 1. Electromagnetic clutch type: Large in mass and size, with low thermal load capacity; 2. Electronically controlled wet friction plate type: Compact structure, fast response, and low energy loss; 3. Hydraulic torque converter type: High starting torque, good hill-start performance, easy driving, excellent driving performance, and capable of reducing vibrations and shocks caused by uneven engine torque.

17

3

Share

What is the urban fuel consumption of the older ES350 model?

Can Temporary License Plates Be Captured for Traffic Violations?

What Does the Skoda Logo Mean?

What items are replaced during the first maintenance of a new car?

What does the EPC warning light in a car mean?

What type of oil does the Nissan Sylphy use?

What is the principle of continuously variable transmission?

What is the method for checking tire pressure with a tire pressure gauge?

What is the best way to clean a three-way catalytic converter?

Can an Automatic Transmission License Be Upgraded to a Manual Transmission License?

Where is the OBD interface located on the Geely GX7?