What is the urban fuel consumption of the Kia K5?

What Are the Reasons for a Truck's Air Conditioner Not Cooling When It's Not Broken?

Truck air conditioner not cooling can be attributed to four most common reasons, as detailed below: Quality and Purity of Refrigerant: The quality and purity of refrigerant play a crucial role in vehicle air conditioning systems. Typically, inferior quality refrigerant can lead to inefficient operation of the air conditioner. Condenser and Radiator: The cooling efficiency of the condenser and radiator also affects the air conditioner's performance. Prolonged lack of cleaning can result in the condenser and radiator being covered by debris and dust. Refrigerant Usage: Many vehicle owners believe that more refrigerant in the air conditioner is better, but this is not the case. During the refrigerant charging process, the amount should be neither too much nor too little. Too little refrigerant results in insufficient pressure in the air conditioner pipes, while too much leads to excessive pressure. In both scenarios, the air conditioner cannot operate normally to provide cooling. Quality of the Expansion Valve: The expansion valve is a critical component in the refrigeration system, usually installed between the liquid receiver and the evaporator. A substandard expansion valve can prevent the refrigerant from functioning as intended.

20

2

Share

What are the functions of LED daytime running lights?

The function of daytime running lights is not to allow the driver to see the road clearly, but to let others know that a car is approaching. Therefore, these lights are not illumination lights but signal lights. Here is more information about daytime running lights: Introduction: Daytime running lights, also known as DRLs, are installed at the front sides of the vehicle to signal the presence of the vehicle to others during the day. Both high beams and low beams are used to illuminate the road ahead of the vehicle. The difference between high beams and low beams is that one illuminates a shorter distance while the other illuminates a longer distance. Typically, low beams have an illumination range of about 30-40 meters with a coverage of approximately 160°, whereas high beams have a more concentrated light with a larger bright spot, allowing them to illuminate higher and farther distances (the exact distance may vary depending on the headlight material). Meaning of the indicator: The indicator light on the car dashboard is the engine fault warning light.

16

1

Share

How to Handle Captured Emission Exceedance?

Speeding will definitely result in demerit points and fines. You need to go to the traffic police station to pay the fine at ICBC. The amount of the fine and the demerit points vary depending on the type of vehicle you are driving. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles at more than 50% above the speed limit on any road will result in 12 demerit points. Below are the penalties for different vehicles: Result 1: Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways at more than 20% above the speed limit will result in 12 demerit points. Driving small passenger vehicles at more than 50% above the speed limit on any road will also result in 12 demerit points. Result 2: Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on roads other than highways or urban expressways at more than 20% above the speed limit will result in 6 demerit points. Result 3: Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways at less than 20% above the speed limit will result in 6 demerit points.

7

0

Share

What is the sequence for 4S dealerships to handle license plate registration and vehicle pickup?

4S dealerships handle license plate registration and vehicle pickup in the following sequence: Pay deposit to order the car: In most cases today, consumers usually place an order first when purchasing a car. At this time, they need to pay a deposit and sign a car purchase contract with the 4S dealership. Pay the remaining balance: When the new car arrives at the dealership or is ready, the salesperson will contact the owner to come and pay the remaining balance. It is important to note that before paying the remaining balance, the owner should carefully inspect the car to ensure it is in good condition with no issues. Pick up the car: After paying the remaining balance, the car officially belongs to the owner. At this point, a temporary license plate can be applied for directly at the 4S dealership. Generally, obtaining a temporary license plate takes about half an hour. Once the temporary license plate is issued, the car can be driven on the road. Handle license plate registration: Since the owner has requested the 4S dealership to handle the license plate registration, all the necessary procedures for the new car will be taken care of by the dealership. The owner only needs to bring the required documents and drive the new car to the vehicle management office at the agreed time. Then, the owner can simply sit in the car while the dealership representative completes all the license plate registration procedures. Install the license plate: Once the official license plate is issued, it just needs to be installed on the car. At this step, it signifies that all the car purchase procedures have been completed.

12

3

Share

Can a second-hand car purchased in another location be registered with local license plates?

Yes. According to relevant laws and regulations in China, a second-hand car purchased in another location can be directly registered in the place where the vehicle is located, or it can be registered in the place of the household registration. Below is a detailed explanation of the procedures for second-hand car transaction and transfer: For the seller: Owner's ID card, vehicle registration certificate, vehicle license, original purchase invoice (if the car has been transferred before, the transfer invoice is required). If the seller is an organization, the original organization code certificate and official seal are needed. For the buyer: ID card, and for non-locals registering for local plates, a valid temporary residence permit is additionally required. If the buyer is an organization, the original organization code certificate and official seal are needed. Original vehicle license. Vehicle registration certificate (the big green book). For out-of-town transfer, the purchase tax booklet is required (before 2001 it was a small red book, after 2001 it is a small green book). (Required before 2012, after 2012 most cities do not require it anymore. Unless it's an autonomous region, then it's not certain.) Location: Bring all the above documents to the second-hand car transfer hall for processing.

17

3

Share

What Age Group Are Child Safety Seats Suitable For?

Child safety seats are categorized into 5 types based on the child's age and weight. Below is a detailed explanation of the applicable scenarios for child safety seats: Suitable for newborns to 15-month-old children (or infants weighing between 2.2 kg - 13 kg): Bassinet-style safety seats are suitable for newborns to 15-month-old infants (or infants weighing between 2.2 kg - 13 kg). These child safety seats usually come with a rocking base and a handle, making them portable like a carrycot. Suitable for newborns to 4-year-old children (or children weighing between 2.2 kg - 18 kg): Convertible safety seats that can be installed both rear-facing and forward-facing offer dual functionality: initially for newborns to 9-month-old infants, then adjusted for 9-month-old infants to 4-year-old children. While these seats lack rocking, portability, or compatibility with strollers, they can be securely fixed in the car for long-term use. If you're looking to save money, this is a good option. Suitable for 1-year-old to 12-year-old children (or children weighing between 9 kg - 36 kg): Combination safety seats are an interesting hybrid product, serving as a dedicated seat for toddlers (aged 1 to 4 years) while also allowing the removal of the built-in harness to use the vehicle's adult seat belt, extending usability up to 12 years of age. Suitable for 3-year-old to 12-year-old children (or children weighing between 15 kg - 36 kg): Unlike Category 3 car booster seats, safety seats for 3-12-year-olds provide enhanced side and head protection. The headrest height is adjustable to accommodate the child's growth, usable until the child reaches a height of 145 cm. Suitable for 3-year-old to 12-year-old children (or children weighing between 15 kg - 36 kg): Many parents believe children can stop using car booster seats after age 4. However, research shows that children's bodies are still too small, and using adult seat belts alone can be extremely dangerous in the event of an accident.

8

5

Share

What is the urban fuel consumption of the Kia K5?

What Are the Reasons for a Truck's Air Conditioner Not Cooling When It's Not Broken?

What are the functions of LED daytime running lights?

How to Handle Captured Emission Exceedance?

What is the sequence for 4S dealerships to handle license plate registration and vehicle pickup?

Can a second-hand car purchased in another location be registered with local license plates?

What Age Group Are Child Safety Seats Suitable For?

Can a Vehicle Be Transferred After Being Mortgaged?

How to Solve the Problem of Color Weakness in Driver's License Physical Examination?

What to Do If You Win a License Plate Lottery but Haven't Bought a Car?

Can touch-up paint be used for car scratch repair?