···
Log in / Register

What is the unique trick to prevent veering off during straight-line driving in Subject 3?

4 Answers
DeBrody
07/30/25 1:49am
Frequent veering during Subject 3 is caused by incorrect driving techniques. Here are some tips related to Subject 3 driving: 1. Proper Steering: Hold the steering wheel correctly. The driver should grip the wheel at the 3 and 9 o'clock positions, with the left hand as the primary and the right hand assisting. Keep the arms and wrists relaxed, avoiding a tight grip. 2. Direction Correction: Make timely adjustments. When feeling the vehicle drifting off course, make slight corrections without large steering movements. 3. Focus on Alignment: Look far ahead. While driving, the driver's gaze should extend forward from the cabin along the front of the vehicle, parallel to the geometric centerline of the road or lane. The farther the gaze, the earlier deviations are detected, allowing for timely corrections. 4. Maintain Speed: Keep a steady speed. Driving too slowly in a straight line can actually make veering more likely, so maintaining a consistent speed helps in keeping the vehicle straight.
Was this review help?
3
0
Share
LeSophie
08/15/25 7:40am
Driving straight but veering off? My most effective method is learning to focus on distant reference points. Nervousness during tests often leads to mistakes, so I recommend choosing a fixed distant target like a road sign or tree, and consistently using it as your guide. Keep your hands lightly on the steering wheel without gripping too tightly, and make minor adjustments when the car slightly drifts, keeping the correction within 5 degrees. Remember not to jerk the wheel sharply, as that will only worsen the veering. Maintain a steady speed without sudden acceleration or deceleration. Practice often in open spaces, simulating straight road sections repeatedly. This visual focus technique has helped many of my students—it enhances directional awareness and reduces test anxiety. The key is persistent practice to develop instinctive reactions, and the veering issue will naturally disappear. After a few practice sessions, you'll notice smoother driving and improved safety, as stable straight-line driving is fundamental to all driving skills.
Was this review help?
9
4
Share
Expand All
VanNaomi
10/21/25 2:40am
My secret technique for handling straight-line deviation is mental relaxation combined with subtle steering. Under exam pressure, a tense body tends to oversteer. I always take a few deep breaths before driving, focusing on the road ahead rather than fixating on adjacent vehicles. With a calm mindset, gently steer the wheel with minimal movements—just slight counter-adjustments when the car tilts slightly. Avoid forceful pulls; the smaller the adjustment, the better. Maintaining a speed around 30km/h is ideal for beginners. Practice repeatedly on straight, flat roads to make the movements more natural. Nervousness is often the culprit—mastering this method visibly reduces deviation and boosts overall driving confidence. Try it, and you'll find driving straight isn't so hard—the key is patience and gradual control.
Was this review help?
8
4
Share
Expand All
SanAdaline
12/04/25 3:06am
One effective method is to focus on the central lane line. During the straight-line driving test (Subject 3), look at the distant dashed lines on the road and use them as aiming points for adjustments. Avoid making large steering wheel movements—only slight turns are needed. Maintain a steady speed and avoid distractions like looking at the scenery. During practice, I always recorded my mistakes, and with more practice, it became a habit, reducing deviations. This method is simple to learn and strengthens directional control.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to Deal with Dried Cement Splashed on the Car Body?

Methods for handling dried cement splashed on the car body: 1. Purchase acidic water (hydrochloric acid) from a pharmacy, dip a brush into it, and apply it to the areas with cement. Since cement is alkaline, the acidic water can gradually dissolve it, followed by rinsing with clean water. White vinegar also has a certain effect; 2. Spray gasoline onto the car paint to soften the cement. Once softened, manually remove it and then clean with car wash liquid; 3. Use a hair dryer to heat the hardened cement. Due to the different thermal expansion rates of cement and the car body, the cement will automatically fall off when heated to a certain extent, after which it can be rinsed clean.
19
0
Share

Is it necessary to apply film on the front windshield?

It is not necessary to apply film on the front windshield unless the windshield has sustained certain damages or cracks. In such cases, applying film does serve a purpose. If the windshield cracks, the car window film can act as an adhesive, holding the shattered glass together and reducing the extent of injuries. However, under normal circumstances, a car would not continue to be driven with a damaged windshield. Potential hazards of applying film: It may obstruct the driver's view and cause reflections on the car body, affecting the visibility of vehicles behind and increasing the likelihood of rear-end collisions. If a metallic film is applied, it may easily block ETC and GPS signals and cause issues like high reflectivity.
4
0
Share

What is AIRBAG car?

AIRBAG is not a car brand, but an airbag. Generally, models equipped with steering wheel airbags will have the AIRBAG logo. Areas marked with SRS or AIRBAG inside the vehicle indicate where the folded airbags are stored. The protection principle of airbags is: when a vehicle experiences certain collision forces, the airbag system triggers a chemical reaction similar to a small explosive detonation. The hidden airbags in the vehicle instantly inflate and deploy, cushioning occupants before their bodies collide with interior equipment, thereby reducing impact forces and minimizing occupant injuries.
5
2
Share

What is the minimum ground clearance of the Equinox?

The minimum ground clearance of the Equinox is 199mm when unloaded and 170mm when fully loaded. The minimum ground clearance reflects the vehicle's ability to pass over obstacles or uneven ground without collision. The Equinox is an SUV model officially released by Chevrolet, featuring Chevrolet's family-style design and equipped with 1.5T and 2.0T engines. In terms of configuration, the Equinox is equipped with the MyLink system, panoramic camera, forward collision warning system, low-speed automatic braking, lane keeping, one-button start, front seat heating and ventilation, and other functions.
17
3
Share

What is a Vehicle Identification Number?

Vehicle Identification Number is the ID number of a car, also known as VIN code, which is determined according to national vehicle management standards and contains information such as the manufacturer, year, model, body type and code, engine code and assembly location of the vehicle. Correctly interpreting the Vehicle Identification Number is very important for us to correctly identify the model and perform correct diagnosis and maintenance. The Vehicle Identification Number consists of 17 characters, 1st to 3rd (WMI): manufacturer, brand and type; 2nd digit: car manufacturer code; 3rd digit: car type code; 4th to 8th (VDS): vehicle characteristics; 9th digit: check digit; 10th digit: model year; 11th digit: assembly plant; 12th to 17th: serial number.
12
2
Share

How to Warm Up a Car in Winter?

Methods for warming up a car in winter: After starting the engine, wait briefly in place (the waiting time depends on when the RPM drops to a relatively stable level, usually no more than one minute). The engine RPM should remain within the range of 2000 to 3000, with the RPM being basically stable without significant fluctuations, and the car body should not exhibit noticeable shaking. Under these conditions, you can shift gears and start driving. The main reason for warming up the car is: After the car has been parked for a long time, the engine oil flows back into the oil pan at the bottom of the engine. Upon starting, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to circulate the oil to the engine components that require lubrication, such as the pistons, connecting rods, and crankshaft.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.