What is the typical urban fuel consumption?

1 Answers
VonOmar
07/29/25 3:59pm
Generally, when driving in urban areas, the average fuel consumption is around 7-9 liters per 100 kilometers (7-9L/100KM). The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is harder to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
Was this review help?
17
1
Share
More Forum Discussions

Can I get my vehicle inspected without handling traffic violations?

Unprocessed traffic violations cannot pass the annual vehicle inspection. Vehicles with outstanding violations must have all traffic violation records cleared before they can undergo the annual inspection. According to Article 49 of the "Motor Vehicle Registration Regulations": The owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Before applying, the owner of the motor vehicle must complete the handling of all road traffic violations and accidents related to the vehicle. Precautions during vehicle inspection: Keep the vehicle clean and tidy: Wash the vehicle as much as possible before the inspection to give it a fresh appearance. Minor scratches on the vehicle will also be less noticeable, making it easier for the inspector to pass. Complete all violation handling: If there are outstanding violations on the vehicle, the staff will not proceed with the annual inspection during the inspection process, which can cause significant delays. Ensure all violations are handled before the inspection. Prepare necessary items to bring: Before the inspection, prepare the motor vehicle license, compulsory traffic insurance policy, driver's ID card, and essential items such as a fire extinguisher, warning triangle, reflective vest, etc. If these items are not prepared, they must be purchased at designated locations.
9
5
Share

How many seats does the Mercedes-Benz GLB have?

Mercedes-Benz GLB is a 7-seater model. Below is the related introduction of Mercedes-Benz GLB: 1. Exterior: The dimensions are 4638/1834/1687mm (including roof rails 1700mm), with a wheelbase of 2829mm. The front features a large chrome grille paired with the prominent Mercedes emblem. At the rear, the taillights use halogen light sources, and the bottom is equipped with a matte silver skid plate. 2. Powertrain: It is equipped with a 1.3T turbocharged four-cylinder engine, delivering a maximum power of 120kW and peak torque of 250Nm. The official 0-100km/h acceleration time is 9.4 seconds.
6
2
Share

What is Clutch Free Play?

Clutch free play refers to the distance when the clutch pedal is not depressed to the point of engagement or disengagement. 1. During the disengagement process: When the clutch pedal is depressed, the free play is first eliminated within the free travel, then the separation gap is created within the working travel, causing the clutch to disengage. 2. During the engagement process: As the clutch pedal is gradually released, the pressure plate moves forward under the force of the pressure spring, first eliminating the separation gap and applying sufficient pressure on the working surfaces of the pressure plate, driven plate, and flywheel. Subsequently, the release bearing moves backward under the force of the return spring, creating free play, and the clutch engages.
7
1
Share

Which Lane to Take When Turning?

When making a left turn while driving, you should enter the left-turn lane, and when making a right turn, enter the right-turn lane. At intersections, you need to follow the lane markings. Below are some related introductions about turning: Turning at a fork: Generally, there are many vehicles at forks, making it prone to accidents. When turning at a fork, you must pay close attention. One essential thing to do when turning is to use your turn signal, primarily to alert nearby vehicles. Additionally, try to leave space for other vehicles to avoid blocking their path and causing traffic congestion. Always turn slowly and avoid hitting obstacles. Turning on a slope: When turning on a slope, always remember to honk your horn. Turning on a slope often involves gear limitations, and slopes themselves are harder to control. Honking can alert others in advance in case of unexpected situations. Always reduce speed on slopes and maintain control to ensure safety.
14
4
Share

Where to Add Windshield Washer Fluid in a Camry?

Toyota Camry's windshield washer fluid reservoir is located near the black cap by the right headlight. 1. Windshield Washer Fluid: Commonly known as 'glass water', it is a consumable liquid used for cleaning the vehicle's windshield. There is usually a windshield washer fluid level indicator on the car's dashboard. If the fluid is running low while driving, this indicator will start flashing. 2. Usage: High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. When you notice reduced transparency of the front windshield during driving, spraying some washer fluid can restore a clear and bright view.
19
0
Share

What brand is the original Porsche engine oil?

Porsche original engine oil generally includes Shell, Mobil, and Castrol. Below are the specific details of the Porsche Macan 2020 model: 1. Body dimensions: The body dimensions are 4696 mm in length, 1923 mm in width, and 1624 mm in height, with a wheelbase of 2807 mm. 2. Powertrain configuration: The Porsche Macan 2020 2.0T is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 252 PS, a maximum power of 185 kW, and a maximum power speed range of 5000 to 6750 rpm.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.