···
Log in / Register

What is the typical speed for cars on highways?

3 Answers
DeGabrielle
07/29/25 6:48pm
Generally, the maximum speed is 120km/h, and the driving speed should not be lower than 80km/h. Below is some extended information about highways: 1. Precautions for highway driving: When driving on highways, it is essential to adhere to the speed limits. The driving speed should not be lower than the minimum limit nor exceed the maximum limit. While driving on highways, maintain a sufficient safe distance from the vehicle ahead. As the driving speed increases, the distance from the vehicle ahead should also increase. 2. Use of lights when driving on highways: If driving on highways at night, you can turn on the high beams because highways have central dividers, so using high beams will not affect the visibility of oncoming drivers. If you are close to the vehicle ahead, it is recommended to turn off the high beams.
Was this review help?
17
2
Share
HoldenLee
08/14/25 12:24pm
When driving on the highway, I usually maintain a speed of around 120 km/h, as many sections have a speed limit of 120. This speed is both safe and stable. I notice that during heavy traffic, I reduce my speed to 100-110 km/h to avoid tailgating and potential accidents. Occasionally, when traffic is light, I increase my speed to 130 km/h, but only for a short distance. Staying within this range helps prevent sudden braking or loss of control, especially on rainy days when I never exceed 100 km/h—poor visibility poses too high a risk. Additionally, a car's performance influences speed habits; with my family sedan, I generally stick to this range for fuel efficiency and peace of mind. In short, adhering to speed limits and avoiding the temptation to go faster actually makes for a more relaxed drive.
Was this review help?
17
5
Share
Expand All
HazelLynn
10/14/25 8:18am
I believe safe driving is more important than anything else, and it's best not to exceed 120 km/h on the highway. I personally experienced a near-accident due to speeding in the rain, so now I keep my speed steady between 100-110 km/h to ensure enough reaction time. The 120 km/h speed limit is reasonable—any faster and the braking distance more than doubles, and driving fast at night increases fatigue. I advise all drivers to check their speedometers and avoid speeding for thrills, protecting themselves and their families. By the way, driving at a slower speed feels more comfortable, with less road noise and less fatigue on long trips. Strictly adhering to safety rules is the responsible approach.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

How Often Should Internal Engine Cleaning Be Performed?

Engine internal cleaning is generally recommended every six months. Below is relevant information about internal cleaning: Drip Bottle Cleaning Method: Currently, the engine cleaning method adopted by 4S shops is commonly known as the "drip bottle" non-disassembly approach. During cleaning, you only need to inject the cleaning agent into the engine and then use a circulation machine to remove carbon deposits and other debris. This method not only effectively eliminates gum, sludge, deposits, and other contaminants inside the engine but also thoroughly cleans the components of the engine lubrication system, preventing damage from acidic substances and metal shavings. Most importantly, it ensures the optimal performance of the lubricating oil and reduces secondary contamination of new lubricating oil. This is because the engine operates in a high-temperature and high-pressure environment, where engine oil and gasoline inevitably generate carbon deposits and gum over time. Prolonged accumulation of these harmful substances can impair oil fluidity and engine combustion conditions, accelerating engine wear. Generally, engine internal cleaning should be performed every 20,000 kilometers as follows: You can use an engine cleaning agent by pouring it into the oil filler port, running the engine for about 5 minutes, and then draining the oil. If the engine is particularly dirty, first drain the oil, add diesel fuel, disconnect the high-voltage line, and use the starter motor to circulate the mixture for about 2 minutes (avoid exceeding this time to prevent damage to the engine oil seals). Alternatively, you can visit an auto detailing shop for professional cleaning, though labor costs may be higher.
3
3
Share

How much fuel does one bar on the Honda Vezel fuel gauge represent?

One bar on the Honda Vezel fuel gauge represents 2 to 3 liters of fuel. Related information about vehicle fuel consumption is as follows: Methods to reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed; apply gentle acceleration and braking, and brake early; maintain tire pressure at the manufacturer-recommended level, and regularly organize the trunk. Precautions for fuel consumption: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion; maintain a steady speed while driving; unstable driving speeds can increase fuel consumption by approximately 6% in suburban areas and 2% in urban areas; avoid carrying unnecessary items in the car to reduce vehicle weight.
5
2
Share

Is the Prado the same as the BaDao?

Prado is the BaDao, which is a mid-to-large-sized SUV. Its body dimensions are: length 4840mm, width 1885mm, height 1890mm, wheelbase 2790mm, front track 1585mm, rear track 1585mm, fuel tank capacity 87L, and body weight 2285kg. The Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, maximum torque of 365Nm, and maximum power of 206kW, paired with a 6-speed automatic transmission.
15
1
Share

What is the method to modify a car's odometer?

The method to modify a car's odometer is: 1. Unplug the odometer sensor connector under the car's hood; 2. Insert the output plug of the mileage adjuster into the sensor's signal port; 3. Plug the mileage adjuster into the cigarette lighter; 4. Turn the car key to start the dashboard and adjust the settings on the mileage adjuster; 5. Adjust the speed as needed. The function of the car odometer is to record the total kilometers driven since the car left the factory. Its working principle is based on knowing the diameter of the car's wheels. By calculating the circumference of the wheel, the number of rotations needed to cover one kilometer can be determined. The odometer automatically records the number of wheel rotations and divides it by the rotations corresponding to one kilometer to obtain the total mileage.
7
3
Share

What transmission does the ix25 use?

ix25 uses a 6-speed manual transmission and a CVT transmission. Taking the 2020 manual fashion ix25 as an example, its body length, width and height are: 4300mm, 1790mm, 1620mm, the wheelbase is 2610mm, the fuel tank capacity is 50l, and the body weight is 1150kg. The 2020 manual fashion ix25 is a MacPherson independent suspension, the rear suspension is a torsion beam non-independent suspension, equipped with a 1.5t naturally aspirated engine, the maximum horsepower is 115ps, the maximum power is 84.4kw, the maximum torque is 143.8nm, matched with a 6-speed manual transmission.
16
2
Share

What is the low ash engine oil designation?

Low ash engine oil is designated as API SP grade. The functions and usage precautions of engine oil are as follows: Functions of engine oil: Separate the relatively sliding parts to reduce wear, bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; circulate carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank, and flush away dirt generated on the working surfaces of parts through the flow of lubricating oil. Precautions for using engine oil: The selection of engine oil should be based on the requirements of the engine, and the oil should match the engine. Multi-grade oil should be selected as it has advantages such as fuel economy, long service life, and high efficiency, providing better protection for the engine; when refueling, the oil quantity should be slightly lower than the scale on the dipstick, and do not overfill.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.