What is the typical decibel level of car noise?

2 Answers
EverlyAnn
07/28/25 8:55pm
Generally, car noise is below 60 decibels. According to the safety technical requirements for motor vehicle operation, the interior noise level of passenger vehicles should not exceed 82 decibels, and the noise level near the driver's ear should not exceed 90 decibels. Noise levels below 60 decibels inside the car are considered acceptable, with 40 to 60 decibels being the normal range for conversation. The vehicle's engine is one source of noise, which can be generated and transmitted through the front fenders, hood, firewall, and exhaust pipe. Road noise occurs when the vehicle is driven at high speeds, caused by wind cutting in and chassis vibrations, as well as gravel impacting the undercarriage.
Was this review help?
8
4
Share
CameronAnn
08/12/25 1:38am
I always pay special attention to the sounds in my car while driving. Generally, the noise level inside a car while driving ranges between 50 to 70 decibels. Specifically, during city traffic jams or low-speed driving, the noise is lower, usually below 50 decibels, as quiet as a soft conversation. On the highway, when driving over 100 kilometers per hour, the noise level can surge to over 60 decibels, even exceeding 70, making it feel like there's a machine roaring around you. Many factors influence the noise level, such as the type of engine, tire wear, road conditions, etc. New cars are quieter than old ones, and concrete roads are noisier than asphalt ones. I remember once on a long drive, the noise was so loud that after a while, my ears felt uncomfortable. Therefore, I recommend regularly checking the tires and suspension system. Opening windows for ventilation can also easily increase noise, and keeping the interior clean can help reduce annoying buzzing sounds.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

Under what circumstances do tires need to be replaced?

Conditions requiring tire replacement: tire deformation, severe tire damage, severely worn tread, sidewall bulging, severe sidewall cracking, damage from driving with underinflated tires, chemical corrosion, cuts from sharp objects, or severe compression. Tires are crucial for driving safety, so they must be replaced if severely damaged. Tire maintenance and care: Regularly inspect tires for debris or foreign objects and remove them promptly. If not cleared in time, some may fall off while driving, while others may gradually erode the tire, potentially puncturing it and causing blowouts or leaks, which can lead to hazardous situations.
19
3
Share

Where is the anti-theft screw on the new A4L?

New A4L anti-theft screws are located on the tires. The anti-theft screws on cars are also known as anti-removal screws. The structure of the anti-theft screws on tires is very complex, and during production, the shape of the anti-theft screws is processed into irregular shapes, mainly to prevent tire theft. When removing the tires, it is necessary to use matching removal tools to take the wheels off. The new A4L is a mid-size sedan launched by FAW-Volkswagen Audi, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 270nm.
12
4
Share

What is the voltage of a typical car charger?

Generally, car chargers are 12V or 24V, and their output power varies depending on the settings of the car charger. In most cases, the USB port's output power is 5V1A (5W). Nowadays, many car chargers support fast-charging technology, and the output power also varies based on different settings, with common outputs being 5V2A (10W) and 9V2A (18W). Car chargers draw power through the cigarette lighter socket. To use them, you need to remove the cigarette lighter and insert the car charger into the socket. Then, you can charge your phone or power other in-car electronic devices via the USB port converted by the car charger.
20
5
Share

How does the car eco mode work?

Car eco mode works by: When this function is activated, the vehicle's computer will restrict the throttle and fuel injectors, effectively reducing the engine's output power. The transmission response also becomes slower, favoring lower RPM conditions to achieve fuel savings. There are two types of eco modes: active and passive. Passive eco mode does not have a dedicated button; it serves as a reminder function. Drivers will notice a green eco reminder symbol on the dashboard while driving. When the vehicle speed exceeds 20 km/h, the eco mode intelligently evaluates the current fuel consumption. When the optimal fuel supply is achieved, the dashboard will simultaneously display the green eco symbol. If the driver heavily presses the accelerator pedal for rapid acceleration or encounters uphill sections, the eco symbol will disappear.
17
0
Share

What is the RPM at 80 mph?

At 80 mph, the RPM is around 2,000 per minute, at which point the car will shift into a higher gear. Some car engines may even run below 2,000 RPM. During high-speed cruising, it is advisable to use a higher gear, as this reduces the engine RPM and improves fuel efficiency. If a lower gear is used during high-speed cruising, the engine RPM will be too high, leading to increased fuel consumption. When overtaking, it is necessary to downshift in advance to increase the engine RPM and enhance wheel torque, allowing for quicker acceleration. When driving a manual transmission car, the gear must match the engine RPM and driving speed to ensure optimal fuel efficiency.
2
0
Share

Is Engine Cleaner Useful?

Engine cleaner is useful, but its effectiveness is relatively limited. Engine cleaner can remove residual sludge and dirt from the engine oil passages, and to some extent, it can also clean carbon deposits from the piston rings and ring grooves, providing practical maintenance benefits for the engine. However, due to its short retention time in the engine lubrication system and the inherent limitations of this no-disassembly cleaning method, the effectiveness of engine cleaner is relatively limited. Although the effect of engine cleaner is somewhat limited, its convenience of use makes it a practical option. With regular use, engine performance can still see significant improvement. Additionally, many 4S shops currently use this method to clean the engine lubrication system.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.