···
Log in / Register

What is the tutorial for using the 2021 Lamando central control screen?

3 Answers
LaAdalynn
09/01/25 7:13am
View screen operating time; click the button to turn on; set the screen display color; click to close, then exit. Set the input method for the 2021 Levin central control screen; set shortcut keys; you can also set function keys.
Was this review help?
13
1
Share
ZacharyFitz
09/14/25 2:57am
I often drive the 2021 Lamando, and the central control screen operation is quite simple. The screen automatically starts when the car is turned on, and the main menu has icons. Just tap the navigation icon to set the destination, and the map updates quickly. The music section supports Bluetooth connection with a phone for playback—just select the media icon and then tap Bluetooth pairing. The air conditioning controls are in the drop-down menu, making it easy to adjust temperature and fan speed, avoiding hassle while driving. I also like the voice assistant—just say 'Navigate to Beijing' and it responds promptly, ensuring good safety. In the personalized settings, you can change the theme color, and the swipe operation is smooth. If the system freezes, just hold the power button for a few seconds to reboot. Overall, it's quick and easy to get used to.
Was this review help?
14
4
Share
Expand All
DelCorey
10/28/25 3:40am
When using the 2021 Lamando's center control screen, I first start the vehicle, and the screen automatically lights up. Then, I focus on the air conditioning function: tap the temperature control icon in the upper left corner to directly adjust the temperature or switch the airflow mode. Next, for the media function, select USB or CarPlay to connect your phone for music and navigation, and Bluetooth pairing is straightforward. Vehicle information, such as tire pressure, can be checked in the settings menu. Don't forget to set up driving assistance reminders to avoid distractions. Beginners can get familiar with it by trying a few times, as the interface icons are intuitive and easy to understand. To power off, tap the power button in the lower right corner. Regularly update the system firmware to prevent lag.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

Does running out of fuel and stalling the car have any impact on the vehicle?

Running out of fuel and stalling has minimal impact on the car, but it's not advisable to do this frequently. Here's relevant information: 1. Overview: The fuel system's function is to supply the engine with a specific quantity of clean, well-atomized gasoline according to its operating conditions, allowing it to mix with air and form a combustible mixture. Additionally, the fuel system needs to store a considerable amount of gasoline to ensure the vehicle has a substantial driving range. 2. Classification: The fuel system also includes electronically controlled gasoline injection systems, fuel supply systems (including auxiliary devices such as fuel tanks, fuel filters, fuel pumps, oil-gas separators, fuel lines, and fuel gauges).
9
0
Share

What does 9AT transmission mean?

It refers to a 9-speed automatic transmission. The "AT" stands for automatic transmission, while the number 9 indicates it has 9 forward gears. As a core component of automobiles, transmissions significantly impact vehicle performance, safety assurance, and stability. Below are more relevant details: 1. Advantages of 9AT transmission: Its greatest benefits are fuel efficiency and faster acceleration. The core structure of a 9AT transmission consists of 4 planetary gear sets and 6 shift elements, one more shift element than the 8HP. With multiple gears, the gear ratio difference between each gear is reduced, providing a wide range of reduction ratios. This allows for lower engine speeds at high speeds, resulting in reduced fuel consumption and stronger acceleration. 2. Disadvantages of 9AT transmission: The increased number of gears means more internal components, higher manufacturing and R&D requirements, and consequently greater costs. The complex internal structure also leads to more potential failure points. Additionally, compressing component sizes to fit the housing reduces the torque capacity.
6
2
Share

Is the Road Slippery During Rain or After Rain?

At the beginning of rain, the road surface is most prone to becoming slippery. Extended information about driving in rainy weather is as follows: 1. Overview: The incidence of car accidents in rainy weather is five times higher than in sunny weather. When driving in windy and rainy conditions during summer, the driver's visibility is obstructed, and the viewing distance is shorter, especially during heavy rainstorms when the windshield wipers cannot promptly clear the rainwater from the windshield, leaving the driver's vision blurred. 2. Maintain Good Visibility: Besides driving cautiously when on the road in rainy weather, it is essential to promptly turn on the windshield wipers. In dim weather conditions, the low beam and fog lights should also be activated. If there is frost on the front windshield, turn on the air conditioning and direct the cold air towards the front windshield. If the rear windshield has frost, activate the rear windshield heater to quickly eliminate the frost and prevent obstructed visibility of vehicles behind.
14
5
Share

What are the effects of depressing the clutch on a downhill slope?

Depressing the clutch on a downhill slope means coasting in neutral. Once the vehicle's braking system fails, the result is that the driver completely loses control of the vehicle. Keeping the clutch depressed for prolonged periods causes the release bearing to rotate at high speeds continuously, significantly reducing its lifespan. It can also lead to excessive wear in the clutch system. Additional information about the clutch is as follows: 1. Introduction: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Definition: The clutch, commonly known as "geely zi" in Hong Kong, is a device that switches the engine power of a car or other power machinery to the axle.
3
3
Share

Handle Violations First or Renew the License First?

First, you must handle the violations before applying for license renewal. When renewing a driver's license, it is not allowed to have any outstanding violations or unpaid fines. All violations must be settled, and fines must be paid before the license can be renewed. If you have outstanding violations and need to renew your license, please first visit the traffic enforcement station of the local police branch to handle the violations, pay the fines at the bank, and then proceed to the relevant license renewal office to complete the renewal process. Documents required for license renewal: Bring two copies of your ID card, two recent 1-inch color passport photos without headwear, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (free medical examinations are also available at the vehicle management office). License renewal process: The driver submits the required documents to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after verifying the documents.
16
5
Share

Are LED headlights brighter than xenon headlights?

LED headlights are brighter than xenon headlights. The functions of automotive LED lights are: 1. Activating turn signals to alert following vehicles and reduce rear-end collisions; 2. Improving road visibility to enhance driving safety; 3. Informing trailing vehicles about braking actions to prompt speed reduction; 4. Using hazard lights during emergency stops or poor visibility conditions to notify surrounding traffic. Maintenance methods for automotive LED lights include: 1. Regularly inspecting lamp covers to prevent moisture accumulation; 2. Periodically replacing bulbs; 3. Properly adjusting headlight height; 4. Using high-quality replacement bulbs; 5. Protecting lights from foreign object impacts.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.