What is the tutorial for replacing the wiper blades on the xrv?

1 Answers
VanIris
07/29/25 9:35pm
xrv wiper blade replacement tutorial is: 1. Lift the driver-side wiper arm, then lift the passenger-side wiper arm; 2. Press the locking tab and slide the blade out of the wiper arm; 3. Pull out the tab end and slide the blade out of the bracket; 4. Slide the new blade into the bracket from the bottom; 5. Slide the blade onto the wiper arm; 6. Lower the passenger-side wiper arm first, then lower the driver-side wiper arm. Taking the 2021 Honda xrv as an example, it belongs to the compact SUV category, with body dimensions of: length 4320mm, width 1772mm, height 1610mm, and a wheelbase of 2610mm. The 2021 Honda xrv is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, maximum power of 96kW, maximum torque of 155Nm, and is paired with a 6-speed manual transmission.
Was this review help?
13
1
Share
More Forum Discussions

How to Distinguish Between Class A, B, and C Cars?

Mainly refer to the vehicle's wheelbase and length parameters to distinguish between Class A, B, and C cars. Below are the relevant introductions about Class A, B, and C cars: 1. Class A refers to compact cars, Class B refers to mid-size cars, and Class C refers to mid-to-large-size cars. 2. Car classes are generally divided into six levels: A00, A0, A, B, C, and D, where A00 refers to micro cars, A0 refers to small cars, A refers to compact cars, B refers to mid-size cars, C refers to mid-to-large-size cars, and D refers to large cars. 3. Micro cars have a wheelbase of 2-2.3m and a length of less than 4m. Small cars have a wheelbase of 2.3-2.5m and a length of 4-4.3m. Compact cars have a wheelbase of 2.5-2.7m and a length of 4.2-4.6m. Mid-size cars have a wheelbase of 2.7-2.85m and a length of 4.3-5m. Mid-to-large-size cars have a wheelbase of 2.85-3m and a length of more than 5m. Large cars have a wheelbase of 2-2.3m and a length of more than 5.2m.
9
3
Share

What to Do About Oil Leakage from the Engine Cylinder Head Cover?

Engine oil leakage is mostly caused by three reasons: leakage from the cylinder head cover gasket, loose screws in the oil passage holes, or sand holes in the cylinder head cover itself. Below are the relevant details about engine oil leakage: 1. First, check for any external oil leakage. Pay special attention to whether there is leakage at the front and rear crankshaft oil seals. If the front crankshaft oil seal is broken, damaged, aged, or if the contact surface between the crankshaft pulley and the oil seal is worn, it can cause oil leakage at the front of the crankshaft. If the rear crankshaft oil seal is broken or damaged, or if the oil return hole in the rear main bearing cap is too small, obstructing oil return, it can cause oil leakage at the rear of the crankshaft. 2. If there is oil leakage at both the front and rear oil seals, or if oil seeps from multiple areas such as the front and rear cylinder head covers, front and rear valve lifter chambers, oil filter, and oil pan gasket, but no obvious leakage point can be found, check the crankcase ventilation system. Clean the crankcase ventilation pipes, especially checking if the PCV valve is malfunctioning due to carbon buildup and sticking. Poor crankcase ventilation can significantly increase the pressure inside the crankcase, leading to oil seepage in multiple areas. 3. If oil leakage persists after tightening the oil filter and some oil line connections, check whether the oil pressure is too high or if the oil pressure relief valve is malfunctioning.
3
3
Share

What Causes the Mercedes R350 Air Conditioning to Not Cool Properly?

Refrigerant overcharge or undercharge, loose drive belt of the car's air conditioning compressor. Insufficient or low refrigerant: Observe through the sight glass on top of the dryer. During normal operation of the air conditioning, if continuous slow bubbles appear in the sight glass, it indicates insufficient refrigerant. If obvious bubble turbulence is observed, it signifies a severe refrigerant shortage. Excessive refrigerant: The proportion of refrigerant volume in the air conditioning system is strictly regulated. An excessive proportion can impair heat dissipation. Similarly, adding too much cooling oil during maintenance can also reduce the heat dissipation capacity of the refrigeration system. Observe through the sight glass on top of the dryer. If no bubbles are visible in the sight glass during operation of the car's air conditioning, and none appear after the compressor stops, it indicates an overcharge of refrigerant. If excessive pressurized cooling oil is present, somewhat turbid bubbles can be seen in the sight glass during normal system operation. Loose drive belt of the car's air conditioning compressor: Automotive cooling relies on refrigerant, which is transported by the air conditioning compressor. The drive belt is a crucial moving component that powers the compressor. If the belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, decreased compressor speed, diminished refrigerant delivery, and ultimately resulting in inadequate cooling from the car's air conditioning.
4
5
Share

Can the National V Torque Limitation Recover by Itself?

National 5 engine torque limitation will not recover automatically. Below is relevant information about China's automotive emission standards: 1. Background: The Chinese government places great emphasis on addressing urban environmental pollution caused by vehicle exhaust emissions. National environmental protection agencies and automotive enterprises are accelerating efforts to meet National III and National VI standards. Controlling vehicle exhaust pollution has become an urgent and immediate responsibility for environmental protection departments, automobile manufacturers, and all sectors of society. 2. Phases: Phase one, starting from July 1, 2020, all vehicles sold and registered must comply with the National VI A standard; Phase two, starting from July 1, 2023, all vehicles sold and registered must comply with the National VI B standard.
7
1
Share

Which Lane to Enter When Making a U-Turn?

On a two-lane road, make a U-turn into the fast lane; on a three-lane road, make a U-turn into the middle lane; on a four-lane road, make a U-turn into the second lane from the right. Before making a U-turn, check if you are in the leftmost lane. If not, change lanes in advance. First, observe the vehicle situation in the left rearview mirror, confirm safety, turn on the left turn signal, flash for 5 seconds, and then change lanes to the left. Precautions for making a U-turn are as follows: Intersections with U-turn signals: At any intersection, if there is a dedicated U-turn signal or ground marking, always follow the instructions of the signal and ground markings. Generally, it is in the leftmost position, although some may have the marking on the right. Intersections without U-turn signals but with left-turn signals: Generally, as long as there is no "No U-turn" sign or a separate U-turn signal, vehicles can make a U-turn at any time without affecting normal traffic and ensuring safety. Usually, the central divider on the road will change from a solid line to a dashed line near the intersection, allowing vehicles to make a U-turn in this area. "No Left Turn" also means "No U-turn": If there is a "No Left Turn" sign at an intersection, even if there is no "No U-turn" sign, U-turns are also prohibited at that intersection. The "No Left Turn" sign has the dual effect of prohibiting both left turns and U-turns.
10
1
Share

Is the left hand on a motorcycle the clutch or the brake?

Motorcycles typically have two brakes. In the past, some small 50CC scooters had the front brake on the left hand and the rear brake on the right hand. For other common scooters, the left hand usually has no controls, the front brake is on the right hand, and the rear brake is operated by the foot. For standard motorcycles, the left hand typically controls the clutch, the right hand operates the front brake, and there is also a rear brake pedal for the right foot. Below are some related introductions about motorcycles: Introduction 1: Motorcycles are powered by gasoline engines and are two- or three-wheeled vehicles steered by handlebars. They are lightweight, flexible, and fast, widely used for patrol, passenger and cargo transport, and also serve as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Introduction 2: In 1885, German inventor Gottlieb Daimler mounted an engine onto a framed machine, giving birth to the world's first motorcycle. Motorcycle sports, related to motorcycles, are a type of military sports activity, involving competitive sports using motorcycles as equipment. They are divided into two-wheeled and three-wheeled categories, with each type further classified by engine cylinder displacement into several classes. Competitions can be categorized into off-road races, multi-day races, road races, track races, and touring races, among others, with rankings determined by speed or driving skills.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.