What is the tutorial for replacing coolant in Roewe 350?

1 Answers
WyattRose
07/29/25 12:52pm
The tutorial for replacing coolant in Roewe 350 is: 1. Locate and open the coolant valve, drain the old coolant, then tighten the coolant valve; 2. Open the filling cap and add new coolant. Taking the 2015 Roewe 350 as an example, it belongs to the compact car category, with body dimensions of: length 4521mm, width 1788mm, height 1492mm, wheelbase 2650mm, fuel tank capacity 55l, and curb weight 1290kg. The 2015 Roewe 350 features a MacPherson strut front suspension and an H-type torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109ps, maximum power of 80kw, maximum torque of 135nm, paired with a 5-speed manual transmission.
Was this review help?
15
3
Share
More Forum Discussions

What to Do When There's Fog Inside the Car on Rainy Days?

The solutions for fog inside the car on rainy days are: 1. Car defogger: There are specialized defoggers for cars to address fogging. You can evenly spray the defogger on the surface of the car glass and then wipe it clean to remove the fog. Its principle is to form a transparent protective film on the glass to prevent water vapor from condensing on its surface. 2. Turn on the car's air circulation system: With technological advancements, most vehicles nowadays are equipped with an air circulation system. This system can help ventilate the air inside the car. If fog forms inside the car, you can eliminate it by turning on the air circulation system. However, it also has a drawback: keeping the air circulation system on for a long time will gradually reduce the warmth inside the car.
8
5
Share

What Causes a New Car to Pull to One Side?

The reasons why a new car may pull to one side are: 1. Inconsistent tire pressure in the drive wheels, leading to uneven wear between the drive wheels and the ground, causing the car to pull; 2. Suspension system faults, such as damage, deformation, or misalignment of the suspension components, can cause the car to pull; 3. Inconsistent wheelbase on the left and right sides—when the car is moving, it will tend to pull toward the side with the shorter wheelbase. Solutions for a new car pulling to one side include: 1. Adjust the belt tension according to specifications and tighten the connecting screws of all components; 2. Inspect all connection points of the oil pipes and tighten the connecting bolts; 3. Replace the oil pipes, power steering pump, or power steering gear; 4. Fill the oil to the specified level and inspect or replace the oil cup.
4
5
Share

Is Coolant the Same as Antifreeze?

Coolant and antifreeze are not the same. Below are the specific differences between automotive coolant and antifreeze: 1. Coolant refers to the liquid that can lower the engine's temperature; antifreeze, whose full name is antifreeze coolant, can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block when the vehicle is parked in cold winter. 2. The difference between coolant and antifreeze is that coolant may only have a cooling function, while antifreeze has both cooling and antifreeze functions. For example, coolant can be water or antifreeze. 3. If the coolant is water, it will be affected by cold seasons. Antifreeze is a coolant with antifreeze properties and can be used all year round. 4. Coolant is composed of ethylene glycol, dye, pure water, and coolant additives.
6
2
Share

Which country does GAC Trumpchi belong to?

GAC Trumpchi is a Chinese automotive brand, independently developed by GAC Group. However, up to 40% of the components used in Trumpchi vehicles are sourced from renowned international parts suppliers. GAC Trumpchi is the first self-developed model by GAC Group, positioned in the mid-to-high-end market. The Trumpchi brand is one of the major domestic independent brands, while GAC Toyota, GAC Honda, GAC Mitsubishi, and GAC Fiat are joint venture brands. Domestic vehicles refer to cars designed and manufactured by Chinese companies with independent intellectual property rights and Chinese-owned brands. GAC Trumpchi was established by GAC Group to enhance core competitiveness and achieve sustainable development. In December 2010, the first Trumpchi sedan was successfully launched, followed by the GA5 and GS5 models. Later, a new A-segment platform was developed to introduce the GA3. In 2014, Trumpchi rapidly expanded its lineup with models such as the GA3S, GS5 Super, GA5 REV extended-range electric vehicle, and GA6.
17
3
Share

What does the yellow light on Mazda i-stop mean?

Mazda i-stop's yellow light indicates that the automatic start-stop system has been deactivated and cannot function normally. Pressing the accelerator to restart the i-stop system will clear the yellow light. Mazda's vehicle lineup includes: Mazda6, Mazda3, CX-5, CX-30, Atenza, etc. Taking the 2020 CX-5 Automatic 2WD Comfort model as an example, it is a compact 5-door, 5-seat SUV with dimensions of 4555mm in length, 1842mm in width, 1685mm in height, and a wheelbase of 2700mm. It is equipped with a 2.0L naturally aspirated engine paired with a 6-speed automatic transmission, delivering a maximum power of 114 kW and a maximum torque of 200 Nm.
18
3
Share

What are the differences between coating and waxing?

Coating and waxing differ in terms of materials, protection duration, and application processes. Materials: Car wax primarily consists of petroleum-derived components, such as polyethylene emulsions or silicone-based polymers, which are oxides. Coating materials, on the other hand, are mostly inorganic silica-based, with a few being organic compounds. Protection duration: Waxing provides the most basic protection for the paint surface. It is prone to decomposition when exposed to water, has a short lifespan, low hardness, and typically lasts only about a month. Coating, however, is a paint maintenance procedure that offers high-temperature resistance, water wash resistance, and UV protection, providing long-term paint protection that can last around six months. Application process: Waxing is applied directly to the paint surface after washing without any prior treatment, and it does not address any imperfections on the paint surface. In contrast, coating requires polishing beforehand to restore the paint's original gloss and enhance its mirror-like effect.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.