What is the trunk volume of the Honda Haoying?

How to Steer When Turning a Car?

Operation method for sharp turns: When steering on sharp curves, you can use the method of turning the steering wheel at a large angle with alternating hands. For example, when turning right, pull the steering wheel with your right hand to between the 5 and 6 o'clock positions and release it, then grasp between the 10 and 11 o'clock positions with your right hand over your right wrist to pull the steering wheel, while moving your left hand to between the 6 and 7 o'clock positions to continue pushing the steering wheel. Special reminder: When the wheels skid to the right, avoid turning the steering wheel to the left to prevent lateral skidding. The opposite applies when the wheels skid to the left. When steering on sharp curves, you can use the method of turning the steering wheel at a large angle with alternating hands, commonly referred to as "large alternating grip". Operation method for gentle turns: 1. When turning on relatively straight and gentle curves, you can keep your hands in the same position on the steering wheel and turn it simultaneously. 2. Both hands should be positioned on the left and right sides of the steering wheel rim, with thumbs naturally extended upward and resting against the rim, and the other four fingers gripping the rim from the outside inward. Sudden steering and quick return method: Often used when the vehicle skids on muddy roads. When the wheels skid to the right, immediately release the accelerator pedal, turn the steering wheel sharply to the right and hold it firmly. When the rear of the vehicle returns to a straight line, straighten the steering wheel and control the speed, ensuring that the steering wheel does not swing left and right.

1

0

Share

Why is there a lot of noise when driving at high speed on the highway?

The reasons for excessive noise when driving at high speed on the highway are as follows: 1. Tire noise: The tires are filled with air, creating a certain atmospheric pressure that forms a sealed small-body pressure. At high speeds, the rapid rotation of the tires, combined with the high pressure inside and the fast friction between the tire surface and the road, generates noise. 2. Engine noise: Driving on the highway requires the engine to produce higher torque, which leads to an increase in RPM, one to two times higher than usual. This causes the engine to emit a high-pitched whining sound. Since the engine is mounted at the front of the car, near the driver's compartment, the noise is more noticeable. Some cars lack sound-absorbing foam on the hood, and the metal panels connecting the engine compartment may not have sufficient insulation or fireproof padding, leading to noise transmission into the cabin. Adding soundproofing foam to the door panels can improve noise insulation. 3. Wind noise: High-speed driving increases wind resistance, which is related to the vehicle's design. For example, SUVs are more affected by wind. If the car's body has damage, high-speed driving can cause noise through gaps or cracks in the structure.

8

1

Share

How Many Class Hours Are Required for Driving License Subject 1?

Subject 1: 12 class hours of training. It is theoretical training, mainly to understand the basic knowledge of motor vehicles and master the regulations of road traffic safety laws, regulations, and road traffic signals. The class hours for other subjects are as follows: 1. Subject 2: 26 class hours of training. 2 class hours for theoretical knowledge and 24 class hours for practical operation, including 8 class hours required for reversing into a garage, stopping and starting on a slope, parallel parking, curve driving, and turning at a right angle. 2. Subject 3: 40 class hours of training. 16 class hours are required for road driving skills and safe and civilized driving knowledge, and 24 class hours are required for the practical operation of road driving skills.

17

3

Share

What does 'Check TPMS' mean?

The 'Check TPMS' warning indicates that the pressure in one of your tires may be too low. Immediately reduce your speed and avoid sharp steering or sudden braking, then check the tire pressure. Here is some relevant information: 1. TPMS stands for Tire Pressure Monitoring System. 2. There are two types of tire pressure monitoring systems based on different monitoring principles. 3. The first is a direct TPMS, which uses pressure sensors installed in each tire to directly measure tire pressure. The system transmits pressure information from inside the tire to a central receiver module via wireless transmitters, then displays the tire pressure data for each tire. The system will automatically issue an alert when tire pressure is too low or if there is a leak. 4. The second is an indirect TPMS. When the pressure in a tire decreases, the vehicle's weight causes that tire's rolling radius to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire alert systems actually rely on calculating the tire's rolling radius to monitor pressure.

7

5

Share

How to Register as a Ride-hailing Driver?

Scan the official QR code to register. Below are the passenger safety management standards for DiDi Ride-hailing: 1. Passenger safety technical guarantees: Utilize internet and GPS technologies to monitor the entire ride-hailing service and vehicle trajectory, ensuring passenger safety and property security throughout the service. The entire service process, from order placement to final payment, is fully recorded. 2. Special passenger safety: Establish special service standards for passengers in special conditions such as illness, disability, pregnancy, or young children to ensure their safety during the ride. 3. Safety contingency plans: Develop comprehensive, reasonable, and legal emergency response plans, and establish an emergency response team to handle emergencies, sudden passenger safety incidents, natural disasters, etc.

6

2

Share

How to Handle Recalled Vehicles?

Here are the methods for handling recalled vehicles: 1. Recall System: First, the automotive recall system refers to the process where manufacturers, upon discovering defects in vehicles already on the market due to design or manufacturing issues that fail to comply with relevant regulations and standards and may lead to safety or environmental problems, must promptly report the product issues, causes, and improvement measures to national authorities. They must then apply for a recall and, upon approval, modify the affected vehicles to eliminate potential hazards. 2. Compensation for Recalled Vehicles: A vehicle recall indicates widespread and potentially serious issues that could severely impact the brand's reputation. Therefore, most automakers offer some form of compensation to owners after a recall. This typically includes extended warranties, coupons, or gifts, which do not significantly affect dealerships but provide some comfort to customers. 3. Consumer Rights: If the recall repair or part replacement delays the consumer's use, they have the right to request compensation or a replacement vehicle from the dealership. Consumers are entitled to appropriate compensation.

13

3

Share

What is the trunk volume of the Honda Haoying?

How to Steer When Turning a Car?

Why is there a lot of noise when driving at high speed on the highway?

How Many Class Hours Are Required for Driving License Subject 1?

What does 'Check TPMS' mean?

How to Register as a Ride-hailing Driver?

How to Handle Recalled Vehicles?

What Does a Back-House Vehicle Mean?

Do Cars Consume More Fuel in Winter Than in Summer?

Can I get my car inspected without an ID card?

Which Type of Car Transmission is the Best?