What is the trunk space of the Mocha?

What is the equivalent displacement of a 1.4T engine?

A 1.4T engine is equivalent to a naturally aspirated engine with a displacement of 1.8-2.0L. Generally, the power output of a turbocharged engine can reach about 1.3-1.5 times that of a naturally aspirated engine with the same displacement. A 1.4T engine is essentially a 1.4L naturally aspirated engine equipped with a turbocharger, resulting in significantly enhanced power. Displacement (Swept-volume) is a specialized term in hydraulic transmission, referring to the volume of fluid intake or exhaust per stroke or cycle. The space between the top dead center and bottom dead center of the piston is called the cylinder displacement. If an engine has multiple cylinders, the sum of the working volumes of all cylinders is referred to as the engine displacement, typically measured in liters (L). Engine displacement is one of the most important structural parameters, more representative of engine size than cylinder diameter and number of cylinders. Many engine performance indicators are closely related to displacement. In China, vehicle classification is based on engine displacement. Micro cars have a displacement ≤1.0L, compact cars range from 1.0-1.6L, mid-size cars from 1.6-2.5L, large cars from 2.5-4.0L, and luxury cars have a displacement >4.0L. Engine displacement determines fuel consumption. Larger displacement engines consume more fuel but also deliver stronger power. However, if a small-displacement engine is poorly matched, it may not be more fuel-efficient than a larger-displacement engine and could even consume more fuel. Small-displacement vehicles are generally cheaper. Micro and compact cars not only have lower vehicle and vessel taxes but also significantly lower fuel consumption and maintenance costs. The "T" stands for turbocharged engine, derived from the English word "Turbo." Typically, if you see "Turbo" or "T" on the rear of a car, it indicates the vehicle is equipped with a turbocharged engine. The primary function of a turbocharger is to increase the engine's air intake, thereby boosting power and torque, making the car more powerful. Installing a turbocharger can increase an engine's maximum power by 40% or more compared to a naturally aspirated version. This means the same engine can output significantly more power after turbocharging. In terms of performance, a 1.4T engine can vary greatly in power and torque output depending on tuning. Its performance is roughly comparable to a 2.0L naturally aspirated engine, but it offers superior low-speed torque, which naturally aspirated engines cannot match. Introduction to Naturally Aspirated and Turbocharged Engines: Naturally Aspirated (abbreviated as NA) is a type of car intake system where air is drawn into the combustion chamber solely by atmospheric pressure without any supercharger. Naturally aspirated engines excel in smooth power delivery and direct throttle response, far surpassing turbocharged engines in these aspects. Turbocharging (Turbo-Boost) is a technology that uses exhaust gases from an internal combustion engine (ICE) to drive an air compressor, thereby increasing the engine's air intake. This enhances the engine's power and torque, making the vehicle more dynamic. After turbocharging, an engine's maximum power can increase by 40% or more compared to its naturally aspirated counterpart. For example, a 1.8T turbocharged engine can deliver performance similar to a 2.4L naturally aspirated engine but with fuel consumption only slightly higher than a 1.8L engine. This improves fuel economy and reduces emissions. However, turbocharging significantly increases the engine's operating pressure and temperature, which can shorten its lifespan compared to a naturally aspirated engine of the same displacement and may affect mechanical and lubrication performance. Turbocharging technology was originally developed for aircraft engines to address insufficient air intake at high altitudes. The turbocharger is the only mechanical device that can increase engine output power without altering its efficiency. A turbocharging system mainly consists of a turbine housing and a compressor. The turbine housing's intake is connected to the engine's exhaust manifold, while the exhaust outlet links to the exhaust pipe. The compressor's intake connects to the air filter pipe, and its outlet attaches to the intake manifold. The turbine and impeller are mounted inside the turbine housing and compressor, respectively, and are rigidly connected on the same shaft.

4

3

Share

Where is the intake port of a motor vehicle engine located?

The location of the intake port of a motor vehicle engine varies depending on the model. Some engine intake ports are located at the front of the engine, while others are at the rear. The position and shape may differ among different vehicles, but one commonality is that they are all within the engine compartment. By opening the hood, the location of the air filter indicates the car's intake port. The primary function of the intake system is to supply the engine with clean, dry, sufficient, and stable air to meet the engine's requirements, while preventing impurities and large particulate dust from entering the engine combustion chamber, which could cause abnormal wear.

5

2

Share

Where to Add Engine Coolant?

Engine coolant is added to the coolant reservoir, which is located in the engine compartment. You can see it by opening the engine hood. The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties to prevent the coolant from freezing and expanding in cold seasons, which could crack the radiator or damage the engine cylinder block. The main function of coolant is to protect the engine for normal and optimal operation, circulating within the engine radiator to provide antifreeze, anti-boil, anti-rust, and anti-corrosion effects. Most antifreeze liquids are colored red or green to make it easier to observe leaks or to distinguish them from other engine fluids, avoiding confusion.

8

5

Share

What is the purpose of adding urea in large vehicles?

Adding urea in large vehicles serves the purpose of catalysis and conversion. The reasons are as follows: 1. Urea is specifically used for diesel engines because diesel engines emit harmful nitrogen oxide gases during operation, which are detrimental to the atmosphere and human health. Long-term exposure to such gases can cause respiratory diseases. 2. To reduce the harm of these gases to the atmosphere and humans, urea is utilized. When added, it triggers a catalytic reaction. 3. When urea encounters nitrogen oxide gases emitted by diesel engines, a chemical reaction occurs, converting the nitrogen oxides into nitrogen and water, which are harmless to the atmosphere and human health.

2

5

Share

What happens if the engine oil is insufficient?

Insufficient engine oil will increase engine wear. If the oil shortage persists for a long time, the engine will suffer severe burning and corrosion, eventually leading to engine failure and abnormal operation. When the oil level in the engine oil pan is too low, the contact areas such as bearings and journals will experience poor lubrication due to the lack of oil, accelerating wear and even causing failures like bearing seizure or crankshaft seizure. If the engine oil is low, the oil level warning light will illuminate while driving, reminding the owner to check or add oil. An excessively low oil level can also cause valve noise. The engine oil level should be maintained between the upper and lower marks on the dipstick.

19

1

Share

Why Does a Car Engine Experience Cylinder Scoring?

Car engine cylinder scoring can occur due to the following reasons: 1. Engine overheating caused by leaks or insufficient coolant in the cooling system that is not replenished in time; 2. Engine oil level too low, leading to loss of cylinder sealing and lubrication function; 3. Piston ring breakage, which scratches the cylinder wall; 4. Piston pin retaining ring detachment, causing scratches on the cylinder wall; 5. Piston rings getting stuck in the ring groove due to carbon deposits, losing their sealing effect; 6. Piston pin protrusion, scratching the cylinder wall; 7. Foreign objects entering the cylinder; 8. Insufficient clearance between the piston and cylinder wall; 9. Overly tight piston pin installation, resulting in piston deformation; 10. Severe piston thermal deformation or melting at the top; 11. Prolonged high-speed or overload operation of the engine.

10

2

Share

What is the trunk space of the Mocha?

What is the equivalent displacement of a 1.4T engine?

Where is the intake port of a motor vehicle engine located?

Where to Add Engine Coolant?

What is the purpose of adding urea in large vehicles?

What happens if the engine oil is insufficient?

Why Does a Car Engine Experience Cylinder Scoring?

Is it necessary to clean the car fuel injectors?

What is the fuel consumption per 100 kilometers for a Land Rover Range Rover?

Under which company is Li Auto brand?

How to Replace the Camry's Cabin Air Filter?