What is the trunk size of the CHR?

2 Answers
MadelineMarie
07/29/25 1:14am
Toyota CHR trunk dimensions are as follows: maximum depth 1630mm, minimum depth 780mm, maximum width 1100mm, and height 785mm. Below is relevant information about trunk mats: 1. Introduction: Car trunk mats, also known as car boot liners, are mats placed at the bottom of the car trunk. The car trunk is a space for storing items, and its importance should not be overlooked. Car trunk mats are an eco-friendly automotive interior component that combines five main functions: water absorption, dust absorption, stain removal, sound insulation, and protection of the trunk carpet. 2. Features and Functions: Trunk mats feature a carefully designed anti-slip surface, waterproof PE material, UV resistance, oil resistance, and strong durability. They prevent sand, mud, water, snow, and oil stains from contaminating the trunk. They are ideal for transporting plants, goods, wet items, and umbrellas. The high-edge 3D design effectively prevents spills from contaminating the vehicle, providing thorough protection for every corner of the trunk against various contaminants.
Was this review help?
18
3
Share
JoelAnn
08/12/25 5:22am
I've been driving the Toyota C-HR for a while now, and the trunk size is approximately 340 liters, which is sufficient for my daily needs. For example, when grocery shopping, it can easily hold several large bags of items, and on weekends, fitting a tent and backpack for camping isn't a squeeze. The rear seats can be folded in a 60/40 split, expanding the space to 700 liters when folded flat, making it convenient for larger luggage or bicycles. Although it's not the largest SUV, its design is practical, with a suitable opening height that allows you to easily reach in without bending over too much, which is quite thoughtful. I recommend test-driving it with a suitcase to experience its space utilization, which is excellent for city driving and short trips. The downside is that it can be a bit tight when carrying oversized items like home appliances, but for commuters and small families, it strikes a perfect balance between size and convenience.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Replace the Battery in a New Tiida Car Key?

To replace the battery in a New Tiida car key, follow these steps: 1. Locate a small switch on the back of the car key and flip it; 2. Pull out the top part to reveal the internal metal mechanical key; 3. Use a flathead screwdriver or other tool to pry open the key cover along the groove, then manually separate it when a gap appears; 4. Inside, you'll find a circular battery—remove the old one and replace it with a new one. The New Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, equipped with a one-touch start system and IKey smart remote key. Its body dimensions are 4250mm in length, 1695mm in width, and 1535mm in height. In terms of appearance, the New Tiida features more curved lines, giving it a rounder and more stylish look. The triangular headlights and front grille lend the Tiida a somewhat fierce front fascia, while the wavy waistline on the side adds tension and dynamism.
3
3
Share

What is the difference between 10w40 and 10w50 engine oil?

10w40 engine oil and 10w50 engine oil have the same low-temperature flow performance, but different viscosities, with 10w50 engine oil having higher viscosity. The following are details about engine oil: 1. The "w" in the engine oil model stands for "winter": If the engine oil model contains "w", it means the oil can be used normally in winter. 2. The number before "w" represents the low-temperature fluidity of the oil: 10w means the oil can flow normally at -25 degrees Celsius. 3. The number after "w" represents the high-temperature viscosity of the oil, with a larger number indicating higher viscosity: Generally, naturally aspirated engine vehicles can use 30 viscosity oil, turbocharged engine vehicles can use 40 viscosity oil, and high-performance, large-displacement engines require 50 or 60 viscosity oil. Therefore, when choosing engine oil, it is essential to select the appropriate oil based on the technical characteristics of the car engine, otherwise it may affect engine performance.
2
1
Share

What are the causes of abnormal noise in the front half shaft of a Mercedes ML?

The reason is that the contact area between the half shaft and the drive wheel is relatively small, and when subjected to greater force, the sound of metal friction becomes abnormally noticeable. Causes of abnormal noise when turning: Generally, it is due to an issue with the CV joint (constant velocity joint). It is advisable to go to a repair shop for inspection as soon as possible. If the boot is damaged and leaking grease, the boot can be replaced, and the ball bearings can be cleaned. If the grease has dried up and the ball bearings are worn, the entire CV joint needs to be replaced. Causes of abnormal noise inside the engine: It could be noise from a certain transmission pulley. It is necessary to go to a repair shop for inspection or use a stethoscope for detection. Generally, it is related to the single belt pulley. Replacing the new single belt pulley should resolve the issue.
5
2
Share

What Causes the Steering Wheel to Squeak?

There are generally three reasons why a car's steering wheel squeaks when turning: 1. Friction between the plastic components of the steering wheel causing the squeaking. 2. A malfunction in the clock spring (spiral cable) of the airbag. 3. Abnormal noise from the shock absorber's thrust bearing. Solutions to address the squeaking steering wheel are as follows: 1. If the noise comes from inside the steering wheel, it is likely an issue with the clock spring. You can remove the steering wheel and apply some grease to the clock spring. If the squeaking persists, the clock spring may need replacement. 2. Another possible cause is an issue with the shock absorber's thrust bearing. To determine if this is the case, open the hood and listen for noise from the shock absorber's top mount. If noise is present, it indicates a problem with the thrust bearing. Applying grease may help, but if the issue persists, replacement is necessary.
13
4
Share

What is the reason for one side of the front fog light not working?

Reasons for one side of the front fog light not working: 1. It could be due to a blown fuse, a short circuit in the bulb, or the bulb burning out. 2. Generally, if only one headlight is not working, it is mostly caused by a burnt-out bulb. 3. If both headlights are not working simultaneously, it could be due to a blown fuse, both bulbs burning out at the same time, or aging and breaking of the wiring or loose terminals, although the probability of these last two phenomena is very low. Solution: The vehicle's circuit fuse box is fixed under the hood in the engine compartment, near the fender. The exact location varies depending on the vehicle model. Locate the circuit fuse box, open the cover, and you will see various fuses and controllers of different amperages for electronic devices. The back of the cover has a corresponding diagram, which can help you locate the positions of the left and right headlight fuses. Use the included puller to remove the fuse and observe whether the contact points at both ends are melted. If there is a gap, it means the fuse is blown. If the node is normal, reinsert the fuse as it was and proceed to check both headlights.
2
2
Share

Which cars use rotary engines?

In the early market, Mazda models used rotary engines, such as the Mazda RX7 and Mazda RX8. However, as of August 2019, these models have been completely discontinued, and due to policies and other reasons, rotary engines are no longer produced, truly exiting the market. The rotary engine eliminates the reciprocating motion effect of pistons in traditional engine cylinders, instead directly converting the combustion expansion force of fuel and mixed gases into driving torque. Additional information: In terms of size, rotary engines are smaller than traditional engines. At the same time, rotary engines have characteristics such as low center of gravity, light weight, and low failure rate, which can improve the handling of the car to a certain extent. However, the disadvantages of rotary engines are also quite obvious, including higher fuel consumption and more pollutant emissions. Because rotary engines do not have the high compression ratio of traditional reciprocating engines, the fuel in the cylinders does not burn fully, leading to a lot of fuel waste and the production of a large amount of harmful substances due to incomplete combustion.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.