What is the trunk size of the Bestune T99?

What is the fuel tank capacity of the 2020 Magotan?

The fuel tank capacity of the 2020 Magotan is 66 liters, which is the officially announced data. Owners who have purchased the 2020 Magotan can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the 2020 Magotan is 95 octane, with a fuel consumption of 7.2-9.1L per 100 kilometers. A full tank of fuel can cover a distance of 725-916 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.

16

2

Share

What does a white line parking space mean?

White parking space: Indicates that this parking space is a paid parking space. In areas with white markings, roadside signs should be checked to determine whether parking is actually allowed here, as not all white lines on the roadside indicate parking spaces. Even in paid parking zones, parking is not allowed at all times; it must be done according to the instructions on roadside signs. Below are related explanations: 1. Blue parking space: Indicates that this parking space is a free parking space. However, it should be noted that there are two situations where penalties may apply: first, parking for more than one day or longer, as blue parking spaces prohibit malicious long-term occupation by motor vehicles; second, some blue dashed parking spaces may have time-limited parking indicated, and exceeding the time limit should be avoided. Additionally, some blue line parking spaces may have arrows indicating the parking direction, which should also be noted. 2. Yellow parking space: Indicates that this parking space is an exclusive parking space. Exclusive parking spaces are generally reserved for special vehicles, such as fire trucks. If the yellow line is a solid line, it means "no parking," and parking is not allowed in areas marked with a single solid yellow line or yellow curb. If the yellow line is dashed, it indicates that temporary parking is allowed, but long-term parking is not permitted.

1

Share

How to Compensate for Low-End Torque Loss Due to Exhaust?

Currently, the popular valve exhaust system is a straightforward solution. It involves installing an adjustable valve in the exhaust pipe to control exhaust backpressure by opening or closing the valve, thereby compensating for low-end torque loss. Additional Information: 1. Passive Valve: A passive valve does not require an additional power source to operate and is typically installed inside the muffler or on the connecting pipe between the mid and rear sections. It mainly consists of a spring and a flap. When the engine speed is low, the exhaust flow is insufficient to overcome the spring tension and lift the flap, causing the exhaust pipe to be blocked by the flap, thereby increasing backpressure. At high engine speeds, the exhaust flow is strong enough to lift the flap, fully opening the exhaust pipe and reducing backpressure, ensuring optimal engine power output. 2. Active Valve: An active valve requires an additional power source to operate and is usually installed on the tailpipe. Depending on the driving mechanism, it can be categorized as either an electric valve or a pneumatic valve. The electric valve is driven by a motor, while the pneumatic valve is driven by a vacuum pump. Similar to the passive valve, the active valve closes at low engine speeds to increase backpressure and opens at high speeds to reduce backpressure. Compared to passive valves, active valves provide lower backpressure at high speeds because the energy to open the valve is supplied by the battery, avoiding engine power loss. In contrast, passive valves require a small amount of engine power to overcome the spring tension, though this energy consumption is negligible.

8

4

Share

What are the factors that cause brake pull?

Factors causing brake pull and their solutions are as follows: 1. Tire pressure. Tires are the only point of contact between the car and the ground, and apart from the braking system, they are a crucial factor affecting braking performance. Both overinflation and underinflation pose safety risks, so it's essential to inflate tires according to the manufacturer's standards. If one tire has significantly higher pressure than the other, it can cause brake pull. Solution: Simply adjust the tire pressure. 2. Brake pads. Different wheels receive varying levels of braking force during deceleration, leading to uneven wear on the brake pads. If brake pull occurs despite normal tire pressure, inspect the wear levels of each brake pad. Solution: Replace the brake pads. 3. Tire wear. Uneven tire wear is another cause of brake pull. Solution: Regularly check tire tread patterns and replace them when necessary.

4

5

Share

How Long Does It Take to Charge a Panamera?

It takes approximately four hours to charge a Panamera. Charging Station: As a charging device for new energy vehicles, a charging station can be analogously understood as a fuel dispenser for conventional gasoline-powered vehicles. Charging stations are typically installed in public construction sites, residential community parking lots, or roadside. Charging stations are categorized into AC charging stations and DC charging stations based on their output current methods. New Energy Vehicles: New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and novel structures.

14

3

Share

What is the location of the license plate with the code Wan B?

Wan B is the license plate code for Wuhu City, Anhui Province. More details about Wan B are as follows: 1. Wan B license plate covers areas: Fanchang, Wuhu County, Nanling, Jiujiang District, Jinghu District, Yijiang District, and Sanshan District. 2. The registration location for Wan B license plates: Wuhu Vehicle Management Office. More details about license plates are as follows: 1. The first character of a license plate number is a Chinese character, representing the abbreviation of the province where the vehicle is registered; the second is an English letter representing the code of the prefecture-level city where the vehicle is located. 2. The license plate number consists of 5 digits, composed of Arabic numerals or a combination of Arabic numerals and English letters.

11

5

Share

What is the trunk size of the Bestune T99?

What is the fuel tank capacity of the 2020 Magotan?

What does a white line parking space mean?

How to Compensate for Low-End Torque Loss Due to Exhaust?

What are the factors that cause brake pull?

How Long Does It Take to Charge a Panamera?

What is the location of the license plate with the code Wan B?

What to Do If 6 Points Are Deducted During the Probationary Period of a Driver's License?

What Causes the Hissing Sound When a Car Goes Over Speed Bumps?

How to Remove Adhesive from Car Body?

Is it necessary to rotate the front and rear tires of a sedan?