What is the trunk size of the Audi A4?

1 Answers
MatthewLynn
07/30/25 8:49am
The Audi A4 trunk offers a capacity of 480L. Below are the detailed specifications of the Audi A4: Powertrain: The Audi A4 is equipped with a 2.0T four-cylinder turbocharged engine, delivering a maximum horsepower of 252 hp and a peak torque of 370 Nm. It has a curb weight of approximately 1.68 tons. The 0-100 km/h acceleration time is 6.6 seconds, paired with a 7-speed dual-clutch transmission. It features a front-engine, all-wheel-drive layout with five-link independent suspension at both the front and rear. Features: The Audi A4 comes with tire pressure monitoring, ESP stability control, and active braking. It also includes front and rear parking sensors, keyless start, and keyless entry for the entire vehicle. The 12.3-inch full LCD instrument panel supports features such as a rearview camera, GPS navigation, in-car Bluetooth, smartphone connectivity, and voice control.
Was this review help?
3
3
Share
More Forum Discussions

What are the reasons for the ESC warning light to illuminate?

ESC warning light illumination is caused by software system alerts, sensor malfunctions, or circuit short circuits. Below are the main functions of ESC: 1. Driving control: It makes the car more stable and safe when changing lanes or turning. Under normal driving conditions, the ESC system does not operate. When the ignition switch is turned on, ESC is activated, the warning light illuminates, and the ESC off indicator light comes on, extinguishing after approximately 4 seconds. If the ESC warning light stays on continuously, it indicates a malfunction in the vehicle's ESC, and the electronic stability control system is not working. 2. Stability control: It primarily controls the longitudinal and lateral stability of the vehicle, ensuring that the vehicle moves according to the driver's intentions. The foundation of the electronic stability control system is the ABS anti-lock braking function. This system performs hundreds of braking actions per second when the tires are about to lock up during braking, somewhat similar to mechanical 'pumping the brakes.' This ensures that the tires continue to roll during full braking, as rolling friction is more effective than sliding friction after lock-up, and it allows control over the vehicle's direction.
4
4
Share

How are the road numbers of GSXY composed?

The composition of each road number is as follows: 1. G: National highways start with a capital G followed by three digits. The first digit being 1 represents radial national highways centered on Beijing; the first digit being 2 represents north-south national highways; the first digit being 3 represents east-west national highways. 2. S: Provincial roads start with a capital S followed by three digits. The first digit being 1 represents radial provincial roads starting from the provincial capital; the first digit being 2 represents north-south provincial roads; the first digit being 3 represents east-west provincial roads. 3. X, Y: County roads (X) and township roads (Y) are both composed of three digits.
20
2
Share

Does the car need to be present for vehicle transfer?

For vehicle transfer, the car must be physically present. According to Article 19, Paragraphs 2 and 3 of the "Motor Vehicle Registration Regulations," when processing transfer registration for a motor vehicle, the vehicle management office must "confirm the motor vehicle, verify the vehicle identification number imprint, review the submitted documents and certificates, and retrieve the license plates and vehicle registration certificate" after accepting the application. Relevant information about vehicle transfer is as follows: 1. Introduction: Vehicle transfer refers to changing the name of the vehicle's owner. When buying a used car, besides checking the vehicle's condition, the most important step is completing the transfer procedures. 2. Principle: Each car has a fixed registration, which mainly records the owner and address, as well as some relevant vehicle parameters. A transferred vehicle proves that the car belongs to the new owner and has no accidents or violations. If the car has issues, such as being involved in an accident, failing an annual inspection, being stolen, or being smuggled, it cannot be transferred through normal procedures.
10
4
Share

What are the differences between MINI F56 and R56?

There are the following differences between MINI F56 and R56: Different body dimensions: The F56 has body dimensions of 3821x1727x1414mm with a wheelbase of 2495mm, which is 98mm longer, 44mm wider, 7mm taller, and has a 28mm longer wheelbase compared to the R56 (body dimensions 3723x1683x1407mm, wheelbase 2467mm). Different exterior: The F56 has fog lights while the R56 doesn't - one side is sealed off, and only the R56 has an additional transmission cooling vent. The rear spoilers, rear bumpers, and exhaust systems are also different between F56 and R56, with the R56's exhaust being thicker and more refined.
7
0
Share

What does hydraulic retarder mean for trucks?

Hydraulic retarder, also known as hydraulic deceleration device, is a type of vehicle retarder that reduces the speed of a vehicle through hydraulic means. Here is some extended information: 1. Usage scenario: When a truck is going down a long slope, although the exhaust brake can achieve good braking effect, it has limited effectiveness for heavy-duty mining dump trucks and can cause some degree of damage to the engine. Therefore, mining dump trucks equipped with hydraulic mechanical transmissions are also equipped with hydraulic retarders. 2. Hydraulic retarder: The stator of the hydraulic retarder is also the retarder housing, connected to the rear of the transmission or the vehicle frame. The rotor is connected to the drive shaft through a hollow shaft, and both the rotor and stator are cast with blades. During operation, by operating the control valve, pressure is applied to the oil reservoir, allowing the working fluid to fill the working chamber between the rotor and stator. When the rotor rotates, it exerts a torque on the stator through the working fluid, and the reverse torque of the stator becomes the braking torque of the rotor. The value of this torque depends on the amount and pressure of the working fluid in the chamber (determined by the braking intensity level set by the control valve) and the rotational speed of the rotor.
10
3
Share

Is the A1 Driver's License Difficult to Obtain?

A1 driver's license is not difficult to obtain, it's just an upgrade, and you can get it after passing the exam. Method to upgrade to A1 driver's license: Obtain a C1 driver's license, upgrade to B2 after one year, hold the B2 license for five years, and during three consecutive years without accumulating 12 penalty points each year, then you can apply for an A1 driver's license. Requirements for applying for an A1 driver's license: Have held an A3 city bus, B1 medium-sized passenger vehicle, or B2 large truck driver's license for more than five years, and have no record of accumulating 12 penalty points in the current scoring cycle and the five consecutive scoring cycles before application. Have held an A2 tractor driver's license for more than two years, and have no record of full penalty points in the most recent scoring cycle before application.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.