What is the trunk capacity of the Xiali N7?

Which Volkswagen model has a rotatable rear emblem?

The Volkswagen CC has a rotatable rear emblem. Taking the 2021 Volkswagen CC as an example, its body structure is a 5-door, 5-seat hatchback with dimensions of 4865mm in length, 1870mm in width, and 1459mm in height, with a wheelbase of 2841mm. It has a fuel tank capacity of 66 liters and a trunk capacity of 501 liters, with a curb weight of 1640kg. The 2021 Volkswagen CC features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.

1

4

Share

What to Do When the Handbrake Cable Breaks?

The solution for a broken handbrake cable is: Go to a repair shop as soon as possible to replace the handbrake cable to avoid potential driving hazards. A broken handbrake cable can have the following impacts: 1. Damage to the handbrake system; 2. Reduced braking performance, with smoke coming from the rear of the car; 3. The brake caliper seizing, brake fluid leakage, excessively high brake fluid temperature, leading to loss of braking function and tire damage. Precautions for using the handbrake: 1. Avoid pulling it too tightly to prevent system damage; 2. Avoid using the handbrake for long-term parking on slopes; 3. Do not pull the handbrake while driving at high speeds; 4. Release the handbrake before starting the car. The function of the handbrake is to provide braking when parking on flat or inclined surfaces, preventing the vehicle from moving automatically when unattended. Its principle involves using a steel wire cable connected to the rear brake shoes to apply braking to the vehicle.

13

4

Share

How Often Should a Car's Belt Be Replaced?

Car belts should generally be replaced every 2 years. The installation method for the belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and then smoothly guide it upward from the side opposite the tensioner pulley to the camshaft pulley; 3. Fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is a crucial component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, locate the generator belt; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.

16

4

Share

Can I apply for ETC for a new car without canceling the old car's ETC?

If the old car's ETC is not canceled, you cannot apply for a new ETC for the new car. This is because an individual can only have one ETC registered under their name if they own only one vehicle. How ETC works: ETC operates through an onboard electronic tag installed on the vehicle's windshield, which communicates with the microwave antenna in the ETC lane at toll stations via dedicated short-range communication. It uses computer networking technology to process background settlements with banks, allowing vehicles to pass through highway or bridge toll stations without stopping while automatically paying the toll. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of at least 10 meters to prevent accidental payment for the front vehicle in case its ETC device malfunctions or is absent. The recognized speed for ETC lane passage is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to payment failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag becomes loose or detached, will render the tag ineffective. In such cases, take it to the bank where the ETC card was issued or a highway service office for inspection. If the detachment was not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause payment failure. Follow the instructions of on-site staff to use the manual MTC lane and pay via cash or card. Excessively thick windshields may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.

16

3

Share

What are the symptoms of a broken clutch cable?

The symptoms of a broken clutch cable are: clutch failure, difficulty in shifting gears, starting, and changing gears. The working principle of the clutch is: 1. When the inner ring is fixed, the outer ring rotates clockwise and the wedge does not lock, allowing the outer ring to rotate freely; 2. When the outer ring rotates counterclockwise, the wedge locks, preventing the outer ring from rotating. The main functions of the clutch are: 1. Gradually increasing the driving force of the car to ensure a smooth start; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload of the transmission system; 4. Reducing torsional vibration impact from the engine and extending the lifespan of transmission gears. Severe clutch wear can lead to: 1. Car slipping and insufficient power; 2. Difficulty in starting the car and ignition problems; 3. Poor climbing performance and increased fuel consumption.

14

2

Share

What are the methods for dealing with aging car window films?

The methods for dealing with aging car window films are: 1. Lift a corner of the car window film; 2. Using a heat gun or hairdryer to apply warm air, gently peel off the car window film with appropriate force and speed; 3. Clean any remaining adhesive from the glass film with a glue remover or cleaning agent; 4. After removing the glass film, there may be an odor, which can be eliminated by ventilation and airing. The functions of car window films include: 1. Heat insulation and sun protection, blocking a large amount of heat generated by infrared rays; 2. UV protection, preventing skin damage and reducing the aging of car interiors; 3. Enhancing the strength of the glass to prevent injuries caused by accidental glass breakage to passengers; 4. Creating a private space where the inside of the car is not visible from the outside, while maintaining visibility from inside the car, ensuring privacy and safety; 5. Compensating for the loss of air conditioning cooling capacity by applying heat-insulating films, thereby reducing the interior temperature; 6. Personalizing and beautifying the car through film application; 7. Reducing the likelihood of accidents caused by glare factors.

7

4

Share

What is the trunk capacity of the Xiali N7?

Which Volkswagen model has a rotatable rear emblem?

What to Do When the Handbrake Cable Breaks?

How Often Should a Car's Belt Be Replaced?

Can I apply for ETC for a new car without canceling the old car's ETC?

What are the symptoms of a broken clutch cable?

What are the methods for dealing with aging car window films?

How Many Models Does Toyota Have in the Commercial Vehicle Segment?

How many kilometers should the first car maintenance oil change be?

Where is the motor vehicle driver's license number?

What is the function of clutch free play?