What is the TRIP button?

Can China III Motorcycles Still Be Transferred Now?

China III motorcycles can be transferred and registered. As long as there are no other local restrictions on motorcycle transfers (referring to non-emission standard restrictions, such as limitations on out-of-town vehicles or out-of-town individuals transferring ownership), the motorcycle can be transferred. New regulations for China III motorcycles: Domestically manufactured and sold motorcycles and mopeds currently adhere to the China II emission standard. According to newly enacted regulations, newly designed vehicles must meet the China III standard and be mass-produced accordingly. All manufactured, sold, and registered motorcycles and mopeds must also complete the transition to meet China III emission standards within a specified timeframe. Introduction to China III motorcycles: China III motorcycles refer to those produced in accordance with the "Limits and Measurement Methods for Emissions from Motorcycles (Test Cycle, China III Phase)" (GB14622-2007) and "Limits and Measurement Methods for Emissions from Mopeds (Test Cycle, China III Phase)" (GB18176-2007) (collectively referred to as the China III standard), approved and promulgated by the Ministry of Environmental Protection of China.

11

3

Share

Which Cars Have Automatic Rearview Mirror Tilt in Reverse?

Models such as the Accord, Lexus ES, Audi Q5L, BYD Qin, and BYD Qin EV are equipped with the automatic rearview mirror tilt function in reverse. The automatic rearview mirror tilt in reverse refers to the right-side mirror automatically adjusting its angle downward when the vehicle is shifted into R gear, making it easier for the driver to see the ground. Below is relevant information: Methods for judging the distance of the rear vehicle via the rearview mirror: When the rear vehicle occupies the entire mirror, the distance is about 3 meters; when it occupies two-thirds of the mirror, the distance is about 5 meters; when it occupies half of the mirror, the distance is about 9 meters; and when it occupies one-third of the mirror, the distance is about 12 meters. If the entire front of the rear vehicle is within the mirror's range, it indicates that the distance between your car and the rear vehicle is at least 5-6 meters, at which point you can safely accelerate and change lanes to the right. Note: Before changing lanes, always remember to glance at the right and right-rear windows to avoid blind spots in the rearview mirror; additionally, pay attention to changes in the size of the rear vehicle's image in the mirror—if it becomes larger, it means the rear vehicle is speeding up, and you should not rush to change lanes.

6

4

Share

What are the symptoms of a clogged fuel filter in a car?

A clogged fuel filter in a car can manifest as easy stalling, weak driving performance, and engine shaking at idle. Easy stalling: After the fuel filter is clogged, the fuel delivery is affected, leading to insufficient fuel supply to the engine. This results in noticeable jerking while driving or shifting gears and makes the engine prone to stalling at idle. Weak driving performance: Due to poor fuel supply, the engine power decreases, causing the vehicle to drive weakly and the speed to drop. Engine shaking at idle: Moderate clogging of the fuel filter not only worsens the car's power but also causes the engine to shake at idle. The following are the methods to address a clogged fuel filter: First, conduct a preliminary analysis to determine whether the jerking phenomenon is caused by a fuel system issue. If it is confirmed to be a problem with the fuel supply system, measure the pressure of the fuel supply system and the fuel pump pressure. Connect a fuel pressure gauge to the fuel line between the fuel pressure regulator and the fuel injector using a tee. Install the air filter, start the engine, and test the fuel supply system pressure under idle, medium load, and high load conditions. Then, adjust the throttle opening. The reading on the fuel pressure gauge should change with the throttle opening—i.e., the pressure value should increase as the throttle opening increases.

2

1

Share

Is it harmful to the circuit if the car charger is always plugged into the cigarette lighter?

No harm. After the vehicle is started, the voltage required by the cigarette lighter can be sufficiently supported by the vehicle's generator. Regarding the car charger, please note the following precautions: Charge after starting: Make sure to plug in the device for charging only after the engine is started. The low voltage during car ignition may affect the charging effect or even damage the car charger. Pay attention to the usage environment: Do not use the car charger during thunderstorms. Also, avoid using it after car washing, as high humidity inside the car can cause component corrosion and oxidation. Do not use the car charger in humid environments. Do not store the car charger in damp conditions. The suitable operating temperature range is 0-45°C. Keep it away from children. Unplug the charger promptly after charging. Reduce high-power usage: Avoid powering more than three devices simultaneously to prevent damage due to excessive power.

20

4

Share

What are the speed ranges for first, second, third, and fourth gears in a car?

First gear is the starting speed, typically ranging from 0 to 5 kilometers per hour. Second gear corresponds to speeds between 5 and 20 kilometers per hour. Third gear covers speeds from 20 to 40 kilometers per hour, while fourth gear is suitable for speeds between 40 and 60 kilometers per hour. Fifth gear is used for speeds ranging from 60 to 100 kilometers per hour. Optimal upshift timing: When the engine has ample power, it produces a muffled sound. After upshifting, if there is no power deficiency or drivetrain vibration, and the vehicle accelerates smoothly and naturally, it indicates the upshift timing is correct. Downshift timing: When the vehicle's speed and engine RPM continuously decrease, and you feel the car shaking or the engine compartment vibrating, it's time to downshift one gear. Downshifting too early can cause jerking, waste engine power, increase fuel consumption, and negatively impact the lifespan of the engine and transmission. Downshifting too late may result in insufficient power even after the gear change, leading to continued jerking during further downshifts. Misjudging the shift timing can cause irreversible consequences and affect the driving experience.

12

1

Share

What Causes the ABS Light to Illuminate in a Car?

There are various states of the ABS light being on, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system lines or poor contact of the ABS relay, leading to system failure. Solution: Check the connection points of the lines and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact of the ABS hydraulic valve body's electrical connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal and push the brake switch linkage down fully with your fingers, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.

15

3

Share

What is the TRIP button?

Can China III Motorcycles Still Be Transferred Now?

Which Cars Have Automatic Rearview Mirror Tilt in Reverse?

What are the symptoms of a clogged fuel filter in a car?

Is it harmful to the circuit if the car charger is always plugged into the cigarette lighter?

What are the speed ranges for first, second, third, and fourth gears in a car?

What Causes the ABS Light to Illuminate in a Car?

Can licensed motorcycles ride into Shenzhen?

What is the minimum height requirement to ride the CFMOTO 250SR?

What is the mnemonic rhyme for Motorcycle Subject 1 test?

What is the actual speed when Gaode Map shows 70 km/h?