···
Log in / Register

What is the Travel Mode of Car Lights?

4 Answers
LenaLee
07/29/25 10:01am
The travel mode of car lights refers to the fact that in China, vehicles drive on the right side of the road, and the headlights are set with the left beam lower and the right beam higher. In some countries where driving is on the left side, oncoming traffic comes from the right, and the headlight adjustment is the opposite. To avoid dazzling oncoming vehicles at night, the travel mode for car lights was introduced. The functions of car lights are: 1. Turn on the turn signal to alert following vehicles and reduce rear-end collisions; 2. Improve visibility of road conditions to enhance driving safety; 3. Inform the vehicles behind that you are braking and they should slow down; 4. In emergencies or bad weather with low visibility, turn on the hazard lights to alert other vehicles.
Was this review help?
20
0
Share
MadelynRose
08/13/25 12:31pm
As someone who loves road trips, I've used travel mode on my car's headlights several times when driving across borders. It's a feature that tweaks the beam direction to avoid blinding oncoming drivers. For instance, when I drove from the US to Canada or Europe, switching it on shifted the lights slightly away from traffic—super handy for left-hand to right-hand driving rules. Not using it risks accidents at night and fines from local authorities. I always flip it through the dashboard settings before a long journey. Modern cars often have it automatic, but older ones need manual adjustment. It makes journeys smoother and safer without constant worrying about glare.
Was this review help?
17
0
Share
Expand All
VonAubree
08/13/25 12:33pm
I find the tech behind travel mode fascinating—it adjusts headlights electronically to suit different countries' traffic systems. Basically, when you enable it, sensors or presets tilt the beam downward or sideways, reducing glare for oncoming vehicles. My experience shows it's crucial for international driving; say, going from the UK to France where rules switch. Without it, lights can be misaligned and cause visibility issues. Most newer cars include this in lighting controls, and regular checks ensure it works fine. It's a smart, subtle feature that enhances safety by adapting to road changes seamlessly.
Was this review help?
16
0
Share
Expand All
Scott
10/07/25 2:29am
Safety-wise, travel mode on headlights is essential to prevent accidents. I always activate it before driving abroad. It shifts the light pattern, so you don't dazzle others on opposite sides of the road. Ignoring it could lead to dangerous glare and potential crashes at night. Check your car's manual for how to set it—it's usually under settings and takes seconds. This simple step aligns with traffic laws and keeps everyone protected.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How to Adjust the Headrest Height of Mercedes-Benz C200?

When the headrest is at the lowest position, you can directly lift it upwards to achieve the second height adjustment without pressing the adjustment button. When the headrest is at the highest position, you can directly press it downwards to achieve the first height adjustment without pressing the adjustment button. To adjust the angle of the front seat headrest, gently pull the headrest downwards. The groove on the headrest support rod will lock onto the adjustment button, and then you can release the adjustment button. The softest part of the headrest is in the middle. If the headrest is too high, the back of the head will only touch the lower edge of the headrest, and the cushioning effect of the headrest will not be utilized.
2
5
Share

What to Do When an Eight-Wheeler Stalls and Rolls Backwards?

Stalling is not a problem, you can stop the vehicle and engage the handbrake. Then restart the vehicle, press the clutch, shift into first gear, slowly release the clutch until the vehicle vibrates, at this point step on the accelerator with your right foot while releasing the handbrake, and move forward. When parking on an uphill slope, pull down the brake, shift into first gear, and then turn left, so that the wheels can resist the vehicle even when rolling backward. When parking on a downhill slope, pull down the brake and shift into reverse gear, then turn right, so that the front wheels can resist the vehicle even when rolling forward, this is the safest method.
9
3
Share

How to Connect the Audio Cable for BMW X1?

Purchase an audio cable that connects to the AUX interface. Insert one end of the AUX cable into your phone or MP3 player and the other end into the BMW AUX interface. Confirm the audio input mode by navigating to the multimedia section in the car's menu and setting it to AUX audio input. Start playing music on your phone or MP3 player and adjust the AUX volume to a suitable level. The BMW AUX interface is a standard 3.5MM port, which connects to the headphone jack of music playback devices like phones or MP3 players via an AUX cable.
4
2
Share

How to deregister a motorcycle that hasn't undergone annual inspection under my name?

To deregister a vehicle, you need a copy of the owner's ID card, the vehicle license, front and rear license plates, and in some places, a vehicle scrapping certificate. Go to the traffic management office to get a certificate and have it stamped to complete the deregistration. A motorcycle that hasn't undergone annual inspection can be deregistered, but the owner will be fined and have points deducted for not having the inspection. All traffic violations must be settled before deregistration can proceed. Motor vehicle registration will be revoked according to the law, and vehicles that meet the national mandatory scrapping standards will be confiscated and forcibly scrapped.
18
3
Share

How to Remove the Key from a Honda CRV?

Turn the key switch to the ACC position and observe whether the dashboard lights up. If the dashboard does not light up, it can be determined that the battery is dead, causing the key to be stuck. Remove the battery and charge it using a charger. If the battery cannot be charged, it needs to be replaced. If debris is confirmed, it can be cleaned. If severe wear causes the key to be stuck, it is recommended to replace the lock cylinder. Within the warranty period, the 4S store can replace it for free. If the key cannot be turned after insertion, it may be due to improper positioning during the last parking. Simply wiggle the steering wheel left and right while turning the key.
11
4
Share

How to Restore Plastic Whitened by Tar Remover?

If the interior of your car has turned white after using a tar remover, you can scrub it with a soft-bristled toothbrush coated with toothpaste. Generally, scrubbing about three times should suffice. If the tar remover has been sprayed on black plastic parts, it's not ideal. In such cases, you may need to use a touch-up pen to restore the color. Whitening of car plastic parts is a normal phenomenon due to aging. You can use a dashboard wax to restore the original color, and it might even make the plastic shinier. Car cleaners mainly consist of surfactants, disinfectants, polishing agents, imported penetrating agents, and unique brightening factors.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.