What is the Transmission Three Guarantees Policy?

1 Answers
William
07/25/25 12:22am
The Transmission Three Guarantees Policy stipulates that during the warranty period of household automotive products, if quality issues arise, consumers can obtain free repairs from the repairer with the Three Guarantees certificate. Within 60 days from the date of purchase invoice issuance by the seller or within 3,000 kilometers of driving distance, if major components of the transmission exhibit quality problems, consumers have the option to replace the transmission free of charge. The automotive transmission is a mechanical or hydraulic device that performs mechanical power conversion. Its function is to alter the transmission ratio, expand the range of torque and speed variation of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable working conditions.
Was this review help?
12
4
Share
More Forum Discussions

How to Remove the Wrench Icon on JAC Refine S3?

To remove the wrench icon (maintenance reminder) on the JAC Refine S3, follow these steps: 1. When the maintenance light illuminates, first press the start button to power on the vehicle without ignition; 2. Press the SET button on the left side of the multifunction steering wheel, then press the SEL button on the right side; 3. Finally, press the cancel button on the left side of the steering wheel to clear the maintenance reminder. The JAC Refine S3 is a new urban compact SUV produced by JAC Motors, with exterior dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, and a wheelbase of 2560mm. It is equipped with a 4GB1.5L engine, delivering a rated power of 6000 rpm and a maximum torque of 146 N·m.
7
2
Share

How to Turn On and Off the Windshield Wipers?

The method to operate the wiper switch is as follows: To activate the automatic wipers, push the right-hand stalk forward once, which will set it to the automatic wiper position. The car will then indicate 'Automatic wipers are on.' To turn off the automatic wipers, pull the wiper stalk backward and then return it to its original position. The wiper sensor is located in the upper middle section of the front windshield. Ensure the wipers are not obstructed and that the front windshield is clean. The wiper sensitivity control switch is located on the right-hand stalk near the steering wheel. The knob can be used to adjust the wiper's sensitivity to rainfall, automatically regulating the wiper speed to provide the driver with a clear view, enhancing convenience and safety during rainy conditions.
3
1
Share

How to Repair a Flooded Car?

Here are the steps to repair a flooded car: 1. Remove seats, doors, and interior. Take out all vehicle seats, transmission decorative covers, carpets, etc., and clean up the water inside. 2. Repair or replace wiring. Replace the wiring harnesses of electronic components such as audio systems, air conditioning control panels, ABS modules, etc. 3. Clean the engine and transmission. First, drain the water from the engine cylinders and intake manifold. For the transmission, disassemble and clean components like the valve body and torque converter. After cleaning, assess the damage and replace the engine or transmission if severely affected. 4. Replace the onboard computer. The onboard computer includes the engine control unit, transmission control unit, airbag control unit, ABS control unit, etc. 5. Handle other aspects. This includes cleaning mud from the chassis and addressing headlight components.
7
3
Share

What does the red exclamation mark on the dashboard mean?

The red exclamation mark on the dashboard indicates a brake system malfunction. If this warning light illuminates, first check whether the handbrake is fully released. If the light remains on after releasing the handbrake, inspect whether the brake fluid level is normal or if the brake pads are excessively worn. If braking performance hasn't diminished, drive cautiously and proceed to the nearest repair shop immediately, as brake conditions directly impact driving safety. When the brake system warning light activates, you must stop and inspect the vehicle immediately regardless of circumstances. The brake system is critically important to drivers - any brake-related issues require immediate resolution.
6
4
Share

What does it mean when the prompt 'failed to smoothly shift gears as instructed' appears during Subject 3?

In Subject 3, the prompt indicating a failure to smoothly shift gears means that the clutch was not fully depressed during gear shifting. Below are the relevant operation instructions for gear shifting: 1. Upshifting operation: After starting in first gear, appropriately press the accelerator to increase speed before upshifting. When accelerating to 15~20 km/h, shift to second gear. During gear shifting, release the accelerator pedal, depress the clutch pedal, move the gear lever to the neutral position, then release the clutch pedal. After releasing, depress the clutch pedal again, push the gear lever into second gear, and then slowly release the clutch while gradually pressing the accelerator pedal to smoothly increase speed. The same method applies to other upshifting operations. 2. Downshifting operation: When downshifting is needed, release the accelerator pedal, depress the clutch pedal, push the gear lever into neutral, then release the clutch pedal. Lightly press the accelerator to increase engine speed (a light press is sufficient, do not exceed 3000 rpm), then depress the clutch pedal again, push the gear lever into a lower gear, and slowly release the clutch until the left foot completely releases the clutch. Then, press the accelerator to control the car's speed in the new gear. During downshifting, you can skip one gear but must not skip two gears. Downshifting can be used when descending long slopes and needing to slow down using engine idle speed.
15
1
Share

Can I Get the First Maintenance Before Reaching 5,000 Kilometers?

It is possible to get the first maintenance before reaching 5,000 kilometers. Below is an extended introduction about the first maintenance: 1. Meaning: The first maintenance of a car refers to the initial service after the new car has been driven. The timing of the first maintenance varies by vehicle, typically performed after driving 3,000-5,000 kilometers. Many brand 4S shops, aiming to shorten customers' maintenance cycles, have adjusted to remind customers to perform maintenance at 5,000 kilometers or 3 months. 2. Items: Replace engine oil, oil filter, gasoline filter, and air filter. Check whether the level of the car's coolant meets the specified requirements, the levels of brake and clutch fluid, whether the oil level in the power steering fluid reservoir meets the specified requirements, check for oil leaks at all oil pipe interfaces in the system, the levels of battery fluid and windshield washer fluid reservoir, the tension and aging of the belts of the generator, air conditioner, water pump, and power steering pump, whether the front and rear lights of the car are complete (including: headlights, marker lights, turn signals, brake lights, reverse lights, and fog lights), the tire pressure and wear of the car tires, tighten the tire bolts to the specified torque, supplement the tire pressure to within the specified value for the model, perform tire rotation based on wear conditions, and whether the car's exhaust emissions meet standards, etc.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.