What is the transmission of the Enclave?

1 Answers
Annie
07/30/25 4:20am
All models of the Enclave are equipped with a 9AT transmission. This transmission offers relatively smooth shifting and high transmission efficiency. The AT transmission is the most technologically mature and widely used transmission in the world. Brands of AT transmissions: ZF-supplied AT transmissions. Aisin-brand AT transmissions from Japan. AT transmissions produced by General Motors in the United States. AT transmission: Also known as a manual-automatic transmission. It is a relatively good type of transmission that combines the advantages of both manual and automatic transmissions, allowing the driver to fully control the shifting timing for manual gear changes. Manual shifting is excellent for driving, as it effectively enhances the driving experience. Manual-automatic transmission: The manual-automatic transmission is also a type of automatic transmission and does not have a clutch pedal. Simply pressing the vehicle's brake allows for gear changes. Many models still use manual-automatic transmissions, with dual-clutch transmissions gradually replacing them.
Was this review help?
9
4
Share
More Forum Discussions

How to Perform Smooth Gear Shifting in Subject Three?

Achieving smooth gear shifting means matching the speed with the appropriate gear and ensuring there is no jerking during the shift. Below are the relevant details: 1. Subject Three: Subject Three, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Manual Transmission Cars: These are cars that use a manual gear-shifting mechanical transmission (also known as manual transmission, MT) to adjust the vehicle's speed. This means the driver must manually move the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve speed changes. The gear lever can only be moved when the clutch is depressed.
3
1
Share

What Causes the Buzzing Noise in the Engine?

Reasons for engine buzzing noise: 1. After starting the car, the engine makes a "buzzing" noise, which is the sound of the valves. This is especially noticeable when starting a cold engine, as the oil pressure hasn't built up yet and the valves aren't properly lubricated. It usually goes away after a short while. 2. If the car has been parked for a long time, this situation may occur. 3. The buzzing noise at low speeds is usually caused by excessive clearance between the piston and the cylinder wall, which can occur due to abnormal wear during installation if the components are too tight. 4. A buzzing noise can also be an early sign of engine knocking, which may be caused by advanced ignition timing or excessive carbon buildup in the cylinder. 5. This phenomenon can also occur during high-speed operation if the engine oil is not properly selected.
18
4
Share

Which has higher fuel consumption, the Changan CS75 or the Haval H6?

Compared to the Changan CS75, the Haval H6 has higher fuel consumption. Here are the reasons: 1. Introduction to the CS75: The Changan CS75 is a compact SUV positioned between the CS55 and CS95. It is equipped with the Bluecore series engines. In terms of power, the CS75 offers two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower and a peak torque of 230N·m. 2. Reasons for the Haval H6's higher fuel consumption: The vehicle is relatively heavy, with wider tires for improved grip, and the engine is tuned for performance rather than fuel economy. 3. Fuel consumption of the Haval H6: The theoretical fuel consumption is 9.4L/100km; the average real-world fuel consumption is 11.3L/100km in urban areas with air conditioning on, 10.6L/100km in urban areas without air conditioning, and 9.9L/100km on suburban roads.
9
5
Share

What Are the Signs of a Bad Clutch Plate?

The signs of a bad clutch plate are as follows: 1. The clutch pedal feels higher: When starting the vehicle, pressing the clutch pedal gives a noticeable sluggishness, which is likely caused by the clutch plate becoming thinner. 2. Reduced vehicle power: With no abnormalities in the engine, the car lacks sufficient power whether starting or climbing hills. Even with high engine RPM, the car still feels underpowered, indicating clutch slippage. 3. A metallic grinding noise is heard when pressing or releasing the clutch pedal, which is likely due to severe wear of the clutch plate.
7
2
Share

How to Adjust Car Rearview Mirrors for Optimal Use?

Introduction to car rearview mirror adjustment: 1. Left rearview mirror: When adjusting the left rearview mirror, the vertical adjustment standard is to place the distant horizon at the center. For horizontal adjustment, the mirror should show the car body occupying 1/4 of the mirror's area, which provides better visibility and enhances driving safety. When adjusting the left rearview mirror, positioning the horizon at the center line of the mirror makes the adjustment process simpler. 2. Right rearview mirror: Adjusting the right rearview mirror is relatively more complicated because in left-hand traffic countries like China, it's harder to gauge right-side traffic. For vertical adjustment of the right rearview mirror, the ground should occupy a larger area, about 2/3 of the mirror's surface. Horizontally, the car body should still occupy 1/4 of the mirror's area. When adjusting the right rearview mirror, it's advisable to position the horizon at the 2/3 point of the mirror before making adjustments. This method simplifies the process and provides better visibility. 3. Interior rearview mirror: When adjusting the interior rearview mirror, position it horizontally so that the driver's right ear is just visible. This adjustment allows for better observation of rear traffic while driving. Vertically, the distant horizon should be placed at the center of the mirror. Remember the adjustment standard for the interior mirror: horizon in the middle, ear on the left side.
18
4
Share

What does 'service' mean in a car in Chinese?

It indicates that the car needs maintenance. Here is some related information about 'service': 1. When the car has traveled a certain distance, a 'service' indicator or a small wrench symbol will appear on the dashboard to remind the user that the car needs inspection or replacement of some worn parts. 2. It is recommended to follow the manual for each maintenance item. 3. Generally, manufacturers have regulations specifying the mileage intervals for maintenance, commonly at 5,000, 7,500, or 10,000 kilometers.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.