What is the transmission model of the Roewe 350?

How to Identify the Quality of Shock Absorbers

Methods to identify the quality of shock absorbers are as follows: 1. Check for leaks. Shock absorbers operate hydraulically, and hydraulic oil is crucial for their function. Only with hydraulic oil can shock absorbers perform effectively. Normally, the surface of a shock absorber should be dry and clean. If you find the exterior wet or even notice oil leakage on the upper part of the piston rod during inspection, it indicates a problem with the shock absorber. 2. Listen to the wheel sounds. The best way to test the quality of shock absorbers is to drive the car on rough roads. With functioning shock absorbers, the car will experience bumps but also a noticeable cushioning effect. If the shock absorbers are faulty, the bumps will feel more pronounced, and the wheels may produce a "thudding" sound when moving up and down, indicating the shock absorbers are no longer working and need replacement. 3. Steering test. Sometimes, only one shock absorber is faulty, and the issue may not be obvious when driving straight. However, during turns, the car's body tilt will increase noticeably. In some faster turns, the car might even skid. In such cases, the shock absorber may not be completely broken, but its damping force has significantly decreased and can no longer counteract the compression force generated by the car's suspension springs. 4. Temperature check by hand. Drive the car on rough roads for about 10 kilometers, then stop and touch the outer shell of the shock absorber. Normally, due to friction, the shock absorber should feel slightly warm. If the shell feels cold, it means the shock absorber was not functioning during the drive. At this point, check whether the shock absorber is broken or if there are other reasons. 5. Regularly inspect the exterior of the shock absorber. Shock absorbers also have dust covers and rubber pads. Although damage to these parts won't affect the shock absorber's function, it can cause unusual noises during driving, which may interfere with diagnosing other vehicle issues. If you notice damage, it's best to repair it promptly.

14

4

Share

Can I Drive on the Highway After Removing the ETC Card?

You can drive on the highway after removing the ETC card and complete the toll payment manually. However, it is recommended not to remove the card, as doing so may cause connection issues with the device and prevent direct passage through the highway. Benefits of Installing ETC: Saves Time: Eliminates the hassle of waiting in line; Green and Eco-Friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduces Wear and Tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improves Efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more technologically advanced. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC Works: Through the onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station via dedicated short-range communication. This utilizes computer networking technology to process backend settlements with banks, enabling vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.

18

1

Share

What to Do If the Car Sunroof Leaks?

If the car sunroof leaks, check the drainage holes to determine if they are clogged by observing the drainage condition. If it is confirmed that the car's drainage pipe is blocked, it is necessary to go to a professional repair shop for treatment. If the car sunroof leak is caused by aging sealing strips, new sealing strips should be replaced promptly. Precautions for checking the sunroof drainage ports: 1. Check the leakage condition of the sunroof and whether the drainage ports are blocked by dust or fallen leaves. Most sunroof leaks are caused by clogged drainage holes. If blocked, clean out the dust and fallen leaves; 2. Check whether the sealing strips of the car sunroof show signs of aging. Rubber components will harden and age after being used for a period of time. Once the sealing strips age, the sunroof's sealing performance will decrease, leading to leaks, and new sealing strips should be replaced.

11

1

Share

What is the purpose of a car sunroof?

The functions of a car sunroof: 1. Change the traditional ventilation method; 2. Prevent exhaust gas from entering the car; 3. Reduce wind noise; 4. Quickly lower the temperature inside the car; 5. Quickly remove fog inside the car; 6. Can broaden the field of vision. Car sunroofs are divided into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type. Maintenance methods for car sunroofs: 1. Regularly clean with fine talcum powder; 2. Clean dust in the sliding tracks and gaps of the sealing strips; 3. Wash with a soft cloth and cleaning agent, do not use sticky cleaning agents; 4. Spray a small amount of plastic protectant or talcum powder on the sealing strip components; 5. After snow or car washing, open the sunroof and dry the residual water on the edges; 6. The frequency of sunroof use should not be too high.

3

1

Share

How to Operate the Car Sunroof?

Steps to operate the car sunroof: 1. Turn the ignition switch to the ON position; 2. Press the OPEN button on the roof until the sunroof opens, then release; 3. When pressing TILT or TILT UP, the sunroof can be tilted backward; 4. Press the CLOSE button on the roof to close the sunroof. Tips for using the sunroof: 1. Horizontal opening: Used to allow air inside the car to escape, achieving ventilation; 2. Tilt opening: Used during light rain in the rainy season to prevent rainwater from entering the car; 3. In winter when there is heavy fog inside the car, it can quickly remove fog from the windshield.

20

1

Share

How to Connect Bluetooth in Cayenne?

First, you need to establish a pairing relationship between the car's Bluetooth and your phone. Turn on the Bluetooth function on both your phone and the car's Bluetooth device. Search for Bluetooth devices on your phone, select the one found, and proceed with pairing and connection. If prompted to enter a pairing password, input the initial pairing code: 0000. Once the pairing is completed, the connection will be successful.

14

1

Share

What is the transmission model of the Roewe 350?

How to Identify the Quality of Shock Absorbers

Can I Drive on the Highway After Removing the ETC Card?

What to Do If the Car Sunroof Leaks?

What is the purpose of a car sunroof?

How to Operate the Car Sunroof?

How to Connect Bluetooth in Cayenne?

What does Toyota mean?

What is the normal idle speed?

How many kilometers does a vehicle generally need for routine maintenance?

Where is the air filter of the 2017 Lavida located?