What is the transmission model of the Fiesta ST?

1 Answers
Naomi
07/29/25 11:48pm
The Fiesta ST is equipped with a 6-speed manual transmission. Transmission: A device that changes the speed ratio and direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several pairs of gears. Function of the transmission: To change the gear ratio between the engine and the wheels, enabling the engine to operate under optimal conditions, expanding the torque and speed transmitted to the driving wheels, and achieving different speeds. It allows the vehicle to reverse and includes a neutral position.
Was this review help?
8
0
Share
More Forum Discussions

What does gear oil 85w140 mean?

Gear oil 85w140 indicates that the gear oil is a multi-grade oil with two grades, 85w and 140, suitable for ambient temperatures ranging from -26°C to +50°C. In 85w140 gear oil, the 85 represents the low-temperature viscosity—the smaller the number, the lower the viscosity, resulting in better low-temperature fluidity and enhanced low-temperature performance. The 'w' stands for winter-grade gear oil. The 140 denotes the high-temperature viscosity—the larger the number, the higher the high-temperature viscosity, allowing it to withstand higher temperatures. Gear oil primarily refers to the lubricating oil used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil mainly functions to lubricate gears and bearings, prevent wear and rust, and assist in dissipating heat from the gears.
16
3
Share

Is It Useful to Flush the Three-Way Catalytic Converter with Water?

Flushing the three-way catalytic converter with water is not effective; specialized three-way catalytic converter cleaning agents should be used for cleaning. The three-way catalytic converter is an important external purification device installed in the automotive exhaust system, which converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Since fuel contains harmful substances like sulfur and phosphorus, chemical complexes can form on the surface of the oxygen sensor and inside the three-way catalytic converter after combustion. Additionally, due to poor driving habits or prolonged driving in congested areas, the engine often operates in an incomplete combustion state, leading to carbon deposits in the oxygen sensor and three-way catalytic converter. Therefore, regular cleaning of the three-way catalytic converter is necessary.
5
0
Share

How to Turn Off Mazda's Auto Start-Stop?

Method to turn off Mazda's auto start-stop: There is an i-stop auto start-stop button on the vehicle's center console. Press and hold this button until the dashboard light turns yellow, which indicates the auto start-stop system is deactivated. Mazda's i-stop system employs a unique "combustion restart" method. During engine restart, the starter motor plays only an auxiliary role, with the main starting force coming from the pre-compressed cylinder before shutdown. Mazda is a Japanese multinational automobile manufacturer, and its SUV lineup includes the CX3, CX30, CX4 (exclusive to China), CX5, CX8, and CX9. Taking the Mazda CX5 as an example, it is positioned as a compact SUV. In terms of body dimensions, its length, width, and height are 4555mm, 1840mm, and 1710mm respectively.
13
2
Share

What is the motorcycle ECU power-off reset method?

Ensure the engine kill switch is in the ON position. Turn the ignition key ON and immediately OFF, then wait for 20 seconds. Cycle the ignition key ON and OFF five times at a rate of one cycle per second. Wait for 20 seconds, then turn the ignition key ON. If the yellow malfunction indicator light on the instrument panel does not illuminate and the fuel pump operates normally, the reset is successful.
6
1
Share

How to Refuel a Scooter Motorcycle?

Scooter motorcycles have a lock on the left side panel under the seat. Insert the key and turn it to open the seat cushion. Unscrew the fuel cap to refuel. Some models allow you to open the seat lock by inserting the key into the handlebar lock and turning it to the left directly.
16
0
Share

What to Do When the Motorcycle Makes a Buzzing Sound When Accelerating but Doesn't Speed Up?

First, unscrew the bolts that secure the motorcycle's carburetor. Turn off the motorcycle's fuel tank switch to prevent fuel from entering the carburetor. Once the bolts securing the motorcycle's carburetor are removed, the carburetor can be taken out. Spray cleaner inside the motorcycle's carburetor to clean it, then reinstall it to complete the operation.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.