What is the transmission fluid specification for the Equinox?

1 Answers
DelNadia
07/30/25 1:51am
The Chevrolet Equinox uses transmission fluid that meets the DEXRON6 standard, which typically requires replacement every two years or 40,000 kilometers. Replacement capacity: The transmission fluid replacement capacity is approximately 3 liters per change. Transmission fluid is an oil product that maintains the cleanliness of the gear system, ensuring proper transmission operation and extending the lifespan of the transmission components. Precautions for fluid replacement: It's important to note that during fluid replacement, only the manufacturer-specified automatic transmission fluid should be used. This is because different automatic transmissions have varying internal structures, friction components, and sealing elements. The original equipment manufacturer (OEM) fluid is specially formulated for the transmission's structure and materials, and even high-quality fluids from other brands may not be suitable.
Was this review help?
7
4
Share
More Forum Discussions

What does crv240turbo refer to?

crv240turbo refers to the Honda CR-V, a classic urban SUV model produced by Dongfeng Honda Automobile Company. It has the following two specific meanings: 1. The meaning of CR-V: CR-V is the abbreviation of comfortable runabout-vehicle, featuring excellent handling performance, a sporty and fashionable design appearance, equipped with Michelin Latitude series SUV tires, and adopting a four-wheel independent suspension system. 2. The meaning of 240turbo: 240turbo refers to Honda's 1.5t turbocharged engine.
10
1
Share

How to Turn on the Fog Lights of Nissan Teana?

Teana fog light switch is located on the left side of the steering wheel at the light control lever, twist it to turn on the fog lights. The steps to remove the fog lights are as follows: 1. Take out a flat-head screwdriver, first pry from the reverse side of the fog light grille to release the clips inside, then the gap on the front side will be larger, use the flat-head screwdriver to gradually pry the clips securing the grille to the front bumper. After all clips are released, the fog light grille can be removed. Note: pry slowly and gently to avoid breaking the plastic clips; 2. The fog lights fixed on the front bumper can be seen, and it will be observed that the fog lights are secured by two screws. Take out a T25 spline wrench and use it to remove these two screws. Keep the removed screws properly for reinstallation; 3. After the screws are removed, the two claws of the fog light are inserted into the clip holes on the front bumper. Hold the side where the screws were removed with your hand, then gently pull upwards to detach the fog light.
1
1
Share

What is the difference between the Envix and the Civic?

The Civic is a sporty compact car, while the Envix is a regular family-oriented compact car. The Envix and the Civic differ in their positioning, engines used, pricing, and exterior design. Below are the key differences between the Envix and the Civic: 1. The Civic's manufacturer suggested retail price (MSRP) ranges from 115,900 yuan to 169,900 yuan, while the Envix's MSRP ranges from 99,800 yuan to 136,800 yuan. 2. The Civic is equipped with two engines: a 1.5-liter turbocharged engine and a 1.0-liter turbocharged engine. The Envix, on the other hand, is only equipped with one engine—a 1.0-liter turbocharged three-cylinder engine. 3. The Envix's 1.0-liter turbocharged engine has the model code P10A5. This engine delivers a maximum power of 90 kW, a maximum torque of 173 Nm, a maximum power output at 5,500 rpm, and a maximum torque range between 2,000 and 4,500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT. The front suspension of the Envix uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
9
3
Share

Where is the fuse located in the Baojun 730?

The Baojun 730 has two fuse boxes inside the car, one located in the engine compartment and the other in the dashboard on the left side of the steering wheel. Below is relevant information about automotive fuses: 1. The purpose of automotive fuses is similar to that of household fuses. When the circuit current is abnormal and exceeds its rated current, the fuse melts to act as a circuit protection barrier. 2. Automotive fuses can be roughly divided into two types: fast-blow fuses and slow-blow fuses. 3. Commonly used automotive fuses include high-current fuses and medium-low current fuses. Generally, medium-low current fuses are more easily accessible. 4. The international standard for automotive blade fuse colors: 2A gray, 3A purple, 4A pink, 5A orange, 7.5A brown, 10A red, 15A blue, 20A yellow, 25A transparent, 30A green, and 40A dark orange. 5. Based on the different colors, it is easy to clearly distinguish the amperage sizes.
7
5
Share

How to open the trunk of the Volkswagen Lavida?

There are several ways to open the trunk of the Volkswagen Lavida: 1. Use the trunk button on the door. On the left front door of the Lavida, which is the driver's side, you can find a trunk release button on the door panel. Simply lift the button upwards with your hand to open the trunk lid. 2. Open via the rear lid button. Below the rear lid of the Lavida, near the license plate lights in the middle, there is a button specifically for opening the trunk. Ensure the vehicle is unlocked, then lift the button upwards to open the trunk. 3. Use the car key to open. Examine the car key, and you will notice three buttons. The middle button is for opening the trunk lid. Press and hold the middle button for about 3 seconds to open the trunk.
2
0
Share

How to Replace the Battery in a BMW 5 Series Key?

To replace the battery in a BMW 5 Series key, follow these steps: 1. Press the switch on the back of the key to remove the mechanical key. 2. Use the mechanical key to open the key cover by inserting it into the slot next to the key and gently prying it open. 3. Once the key cover is open, the old battery will be visible. 4. Use a small flat-head screwdriver to remove the depleted battery. 5. Insert the new battery, ensuring the "+" side faces upward. 6. After installing the battery, reassemble the key. 7. Test the key's lock button and other functions to ensure they work properly. Here are some important notes: 1. Improper battery replacement may damage the car key. 2. Before replacing the battery, check the battery model. When purchasing a new battery, pay attention to its voltage, size, and specifications. 3. If you are unsure about replacing the battery, you can visit a 4S store for assistance. 4. Avoid using the key outside its operational range, as excessive use beyond this range may cause the key to malfunction. 5. Exposure to strong magnetic fields can lead to electronic key failure. 6. Excessive moisture on your hands may cause the key to rust or even short-circuit.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.