What is the traffic violation code 10390 and how is it penalized?

1 Answers
MacDelaney
07/29/25 9:26pm
10390 refers to the traffic violation of motor vehicles violating parking regulations. It does not incur demerit points but carries a fine ranging from 20 to 200 yuan. Below is a detailed introduction to traffic violation codes: 1. Meaning of violation codes: Traffic violation codes are a set of encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. 2. The first digit of the code: This is the behavior code, which includes numbers 1 to 5 and 7, 8. 1 indicates motor vehicle traffic, 2 indicates non-motor vehicle traffic, 3 indicates pedestrian or passenger traffic, 4 indicates highway traffic, 5 indicates other regulations, 7 indicates implementation rules of provinces, autonomous regions, or municipalities directly under the central government, and 8 indicates local regulations of cities (prefectures, autonomous prefectures, or leagues). 3. The second digit of the code: This is the demerit point classification code, which includes numbers 0, 1, 2, 3, 6, and 7. 0 indicates no demerit points, 1 indicates 1 demerit point, 2 indicates 2 demerit points, 3 indicates 3 demerit points, 6 indicates 6 demerit points, and 7 indicates 12 demerit points.
Was this review help?
2
2
Share
More Forum Discussions

What are the reasons why a car cannot be turned off?

The reason why a car cannot be turned off is likely due to damage inside the ignition switch. The ignition switch has ACC, ON, and START positions. Turning to ACC powers the car's electrical equipment; ON powers the ABS (Anti-lock Braking System), AIRBAG (airbag), fuel pump, and ECU power supply, among others; while START is for ignition. Solutions for not being able to turn off the car are as follows: 1. Directly disconnect the fuel line switch. This mechanical fuel line switch varies in location depending on the car model—some are under the seat, while others are on the lower left side of the steering wheel. 2. For electronically controlled diesel engines, similar to car keys, they only power on when in the ON position, with the ECU controlling the fuel injectors to spray fuel. Therefore, turning off the key for such diesel engines stops the fuel injectors, effectively cutting off the fuel supply.
17
5
Share

What are the steps to replace the cabin air filter in a Buick Envision?

The method for replacing the cabin air filter in the Buick Envision is as follows: 1. Open the glove box and remove the fuse box cover. 2. Remove the spring rope buckle, then forcefully pull upward on the plastic beam above the glove box to remove it. 3. Squeeze both sides toward the middle with force to completely remove the glove box, exposing the cabin air filter housing. 4. There are buckles on both sides; open the buckles to lift the housing cover, then remove the old filter and install the new one. Finally, reassemble everything in reverse order. Additional information about the Buick Envision's cabin air filter: 1. Generally, the cabin air filter in the Buick Envision should be replaced every 10,000-15,000 kilometers or once a year. 2. The replacement interval for the cabin air filter mainly depends on the external environment.
12
0
Share

How to turn on the high beam of Nissan Qashqai?

To turn on the high beam of Nissan Qashqai, follow these steps: Turn the end of the light control lever forward to the second gear to turn on the low beam. In the low beam state, gently push the light control lever forward to switch to the high beam. Additional information: 1. It is generally best not to use high beams when driving in the city because the lighting conditions are usually good. The high angle of the high beam can easily dazzle oncoming drivers and pedestrians, affecting their vision and posing safety risks. It is also considered impolite driving behavior. However, alternately turning the high beam on and off at night can replace the horn to alert pedestrians and vehicles around you, avoiding excessive noise. 2. You can use the high beam when driving on highways or in rural areas without streetlights to expand your field of vision. However, when encountering oncoming vehicles, switch to the low beam for safety and courtesy. 3. When driving at low speeds, the engine's power generation is insufficient, and the battery is in a state of negative charging. Using the high beam can affect its lifespan. Additionally, using the high beam at low speeds at night will also increase the vehicle's fuel consumption.
9
3
Share

What are the differences between the Bora and Lavida?

The differences between the Bora and Lavida: 1. Different body dimensions: The Bora's body dimensions are 4663mm in length, 1815mm in width, and 1462mm in height; the Lavida's body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height. 2. Different fuel tank capacities: The Bora has a fuel tank capacity of 50L, while the Lavida has a fuel tank capacity of 51L. Here are the similarities between the Bora and Lavida: 1. Both the Bora and Lavida are equipped with a 7-speed dual-clutch transmission. They both use a McPherson-type independent front suspension and a torsion beam-type non-independent rear suspension. 2. Both feature electric power steering and a unibody structure.
10
4
Share

How to Deal with Fogging in Car Rearview Camera?

A rearview camera is a type of car camera installed at the rear of the vehicle. It works in combination with a display screen installed inside the car to form a complete rearview imaging system, allowing the driver to see real-time video images of the area behind the car when reversing. The solutions for fogging in a car rearview camera are as follows: 1. Surface fogging: Simply wipe it clean with a dry, soft cotton cloth. Generally, avoid using cleaning agents. 2. Internal fogging: Remove the camera and place it in a relatively dry environment. Usually, the moisture will disappear after some time. 3. If necessary, remove it to blow dry the water, then apply some glass glue at the water inlet. Wait for the glass glue to dry for about half an hour before reinstalling it.
7
1
Share

What to Do When the Car Tire Pressure Warning Light Comes On?

Solutions for car tire pressure warning are as follows: 1. If the tire is punctured, it needs to be repaired or replaced. For puncture holes smaller than 6mm, repair is possible, with mushroom plugs being the most effective repair material. For holes larger than 6mm, tire replacement is necessary. 2. If the tire pressure warning is triggered after prolonged driving, take a break before continuing. Extended driving increases tire temperature, causing the tire pressure to rise due to thermal expansion. In this case, stop and let the tires cool naturally before resuming, or switch to a spare tire. 3. If the tire pressure is insufficient, it needs to be refilled. Use an onboard air pump to inflate the tires to the normal range before continuing to drive. 4. If the tire pressure sensor malfunctions, take the car to a repair shop. Use a fault detection tool to clear the error code.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.